Nice question, lets check and see what I found:
**RV City Water Inlet with Brass Check Valve - 1/2" MPT - Aluminum Flange - Surface Mount # 37262185.
Yes, it will work. The city water connection or inlet is more of a universal part and not a brand specific item.
You can mount it as long as you make sure you have the proper connections and plumbing know how. If you want this to replace your old or damaged inlet just make sure you follow the specs and directions or have a plumber install... view full answer...
We can't recommend the use of the Bulldog wheel caster with the Ultimate Trailer Jack # 322-RDJ-2K. The only one that can be used is the # JC-102 which is a confirmed fit. view full answer...
Is it possible the brakes on the camper are self-adjusting and were new? This is a common problem where they aren't fully adjusted so they take a higher brake controller setting but as they tighten with each application they eventually feel more and more touchy/powerful with every application so you end up needing to lower the brake controller output settings.
With the lower brake output settings do the brakes seem to react smoothly? Or do they lock up immediately? If they lock up immediately... view full answer...
What's great about the Lippert Jack-It part # LC429756 is that you can actually adapt it to fit a hitch instead with the part # LC723359 so that it would cover both of your needs easily and reasonably. I think this is your best option overall as it doesn't require additional adapters and a more expensive bike rack as well.
If you check out the review video I attached for the Bump It you can see how easily it converts to being a hitch rack as well. view full answer...
Based on the specifications that Dexter gave me for your axle, your axle is a 3,500 lbs torsion axle. We do not carry torsion axles, so the best upgrade for your trailer would be an axle-less suspension system. The axle-less system will be far easier to install and set up compared to a traditional straight-axle and leaf spring suspension system. It also provides more ground clearance and better ride quality. Since there is no axle connecting them, it allows the springs to absorb road shock... view full answer...
I believe the 2021 Aliner Expedition Camper has a 2" by 4" bumper. Providing your bumper can support the attachment and weight, I highly recommend an RV Bumper Hitch, # C19101. This is a very cost effective way of adding a hitch to a small camper for attachments such as bike racks or cargo carrier, # e98874. This has a maximum tongue weight of up to a full 350 lbs.
If you do not already have a bike rack that is rated for use on a travel trailer, please let us know and we will be glad... view full answer...
The correct replacement bearing for your Timken 07100 is the # L44643, but to determine the correct race and grease seal you will need to measure your hub.
As long as the outside diameter of your current race is 1.980" you will be able to use race # L44610, but for the grease seal you will need to use digital calipers like # PTW80157 to precisely measure the spindle where the grease seal rides and the hub where the grease seal rides as shown in the included diagram.
If you can provide... view full answer...
I do have some great sewer hose options but they aren't trailer specific so if there is anything special about the Aliner Grand Ascape Plus, I'm not aware. That said, most trailers come with bayonet fittings on the end of the waste valves which allows you to use a hose like the Viper RV Sewer Hose part # D04-0475. Therefore, so long as you have those fittings that is what I recommend. If you have some other sort of setup, feel free to send some photos over or browse our selection below. view full answer...
From what I could find it looks like your 2015 Aliner Evolution camper is 22' long. If this is the box itself then you need the Adco SFS AquaShed RV Cover for Hi-Lo Travel Trailers # 290-12252 but if that 22' length includes the trailer tongue then your box is likely closer to the 18' length that the Cover # 290-12295 fits instead.
The SFS AquaShed is one of the better storage covers as it's designed with some breathability to prevent mold and mildew buildup and it comes with cinch ropes... view full answer...
Go To Results