What our customers are saying:
I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex
Alex
Blowing Rock, NC
Videos
for Cold Air Intakes
Help Articles
Expert Answers
The PR4 leaf spring which we sell as #e28SR is not interchangeable with the PR4B which we sell as part #e54SR. The springs are different lengths and capacities, with the #e54SR being 25-1/8 of an inch long for a 3500 lb axle and the #e28SR being…
The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR does not have an internal battery so it will require you to install a 12v outlet #RM-9332 since your 2009 Jeep Wrangler requires you to disconnect the positive battery cable. This…
Different manufacturers sometimes have different philosophies about the set-up process of a weight distribution system on a vehicle with factory air shocks. I can share with you the process we have found to work well for us when setting up a weight…
We do have a trailer hitch receiver that fits your 2024 Nissan Pathfinder, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C46DR
The BAKFlip MX4 Hard Tonneau Cover #BAK77FR is confirmed to fit the 2022 Jeep Gladiator with Trail Rail System. This cover is made in the USA, has a matte black finish and has a tri-fold design that allows for partial or full truck bed access in…
There are definitely rack systems that fit the 5' bed of your 2020 Jeep Gladiator, and you have three terrific options from Yakima: - Yakima BedRock HD Truck Bed Cargo Rack w/…
I recommend the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black #BAK88ZR. It offers full bed access and will be an easy to use system with you RCI bed rack.
The difference is the generation of the Air Lift Wireless One compressor kit the remote was designed for. The part #AL72704 fits the older style that was not Bluetooth compatible whereas the #AL39NV fits the #AL25980 which is the current version of…
Old springs tend to stretch out as they wear out so in your situation you would want to go with a slightly shorter spring like the 25-1/4 inch length which we have in a 4k capacity part #e57SR, 5k with part #e28SR, or 6k part #e78SR.
I do have an option for you but Atwood was bought out and their replacement parts are no longer available, including the repair kit you would need. The best option is to replace that A-frame coupler with a new one that attaches to a 2 inch hitch…
Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…
Curt confirmed their class I hitch #C11564 fits your Golf's exhaust configuration. This hitch has a 100-pound tongue weight capacity and a 2000-pound towing capacity. If your intended use is to…
