Optronics Opti-Brite LED Work Light w/ Shock Mount - Flood Beam - 2,800 Lumens - Aluminum - 12V/24V

Video Transcript for Review of Optronics Lights - Utility/Work Lights - TLL57FB

Today, we're going to take a look at the Optronics. Opti-Brite L.E.D Work Light with the Shock Mount and the flood beam pattern. Now, this is a heavy duty LED Work Light provides a nice bright white light it's ideal for industrial, agricultural and recreational applications does offer a flood beam design. So it illuminates a very wide area. And if you notice the Mount that the lights mounted on, it's a Shock Mount towers, which will protect the light against vibration and increased stability. They actually have rubber grommets that the bolts go through that will absorb a lot of vibration or shock.

So it doesn't transport it to the light itself. Now, this slide does use SMT technology, which is Surface-mount technology. It's a durable construction of the LED circuit board helps better withstand shock and vibration and allows for improved heat distribution and these use LEDs.The LEDs are nice because they make great replacements for incandescent lights. They last about 50 times longer and they're more efficient. They'll provide brighter light with less power output.

And of course no bulbs to replace no brittle filaments to break. And there is a lifetime warranty on the LEDs. The slide is a nice durable water resistant construction. It's all in a black powder coated die-cast aluminum housing, which is very durable rustproof the lens on it. It's a nice poly tough polycarbonate lens, which is impact resistant.

And a slight does meet the IP69K rating, which means it'll stand up to severe environmental conditions and cleaning methods. This slide is compatible with 12 volt and 24 volt DC systems. It's a very easy installation you can see with hardware's all included here.It's a dual-bolt pedestal-style bracket uses stainless steel hardware for installation and it is an adjustable bracket. So when you do mount this at this bracket, I'll let you adjust the angle of the light as needed. You see the power cord on the back.

It's a 20 inch long, 16-gauge size black power wire and white ground wire. And they're all combined in this nice rubber casing to protect it. A few specs on it the quantity for one light, the light output effective lumen output is 2,800 lumens. The raw lumen output is 4,000 lumens does have eight LEDs, give you a few dimensions on this and then we're going to hook this up to some power, just to see how bright it is, the overall dimension. The heights on it from very bottom to very top is seven and three eighths inches. The width on it, seven and five 30 seconds wide. And the depth on it from the back to the very front it's four and five sixteenths inches.The light just itself, the width of just the light is six and three quarter inches. The height of light is four and one eighths inches, power drawn a slide at 12.8 volts is 3.7 amps. And at 24 volts is two amps. So what I'm going to try to do now is we're going to hook this up and a black wire and a white wire. So we'll take our black power wire, put that up and then we'll take our white ground wire. And what we're going to do is go ahead and turn on the overhead or turn on the 12 volt power.And there you can see what the 12 volt power orange, very bright light. And then what I'm going to do is go ahead and turn off the overhead light and you can see how bright it is. I'm going to try to show you the flood pattern gives you a very wide area that it lights up. And again, it's eight LEDs. Go ahead and turn back on our overhead lights. Even with the lights on, you can see how bright it is. Go ahead and turn off our 12 volt power, but that should do it for the review on the Optronics. Opti-Brite L.E.D Work Light with the shock Mount in the flood beam pattern.