To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 1,000-lb capacity truck bed rail tie down anchors stay out of sight and out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.
Features:
Specs:
If you have pop-out rail caps you can install the anchors in seconds. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
If you have truck bed rails with hidden stake pockets that don't have pop-out rail caps, a router and a drill with a 1/2" bit (not included) are required to install the anchors.
The router bit (sold separately) lets you perfectly trim the caps without damaging your truck bed. To install the anchors, drill a 1/2" hole in the center of each rail cap and use the router to make the cuts. The router bit has 4 roller bearings that guide the router around the inner steel pocket to prevent overcutting the surface of your bedrails. Cut around each perimeter several times so that all the plastic residue resulting from the cuts gets trimmed away. Once the caps have been trimmed you can install the anchors.
If you have rear stake pockets with an inner plastic shaft, use a router with the rotary pocket saw bit (sold separately) to remove it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Bull Ring Retractable Truck Bed Stake Pocket Tie Down Anchor set. This set is going to include four of these heavy duty anchors that will install into the stake pockets on top of your truck's bed roll, to provide tie down points to secure your load. They are going to be much easier to reach than the factory anchor points inside your bed, being up there on your bed rails will be much easier for you to connect your S-hooks and J-hooks there, rather than having to reach inside your bed to connect to secure your load down. These are designed to work specifically for your 1995 and newer Dodge Ram, your 2014 through 2019 Toyota Tundra, and your 2022 and newer and Hyundai Santa Cruz. So these are going to fit right into the stake pockets on those models.
You are going to get four of these, as I said, so that will be enough for your front and rear pockets. We do also have kits available with a quantity of six. So if you have a Ram with an eight foot bed, and you want front, middle and rear stake pocket anchors, you can pick up that six pack instead. Or we do also have a pack of two if you're just wanting a couple anchors at either the front or the rear, you have that option available as well. Now these are a durable stainless steel ring, so they are going to give you a nice solid connection for your S-hooks and J-hooks, and they are gonna provide a 1000 pound weight capacity.
As you can see, we also have the polished stainless steel plate here for a nice classic look. Being stainless steel construction, it's gonna help resist rust and corrosion as well. Now these are going to fit flush. So you're gonna sit level with your rail caps, and so they are gonna be compatible with most tonneau covers. And then here on the bottom, we are going to have glass-reinforced nylon lower bodies to help dampen sound.
So when you're ready to use them, you can pull 'em out they'll stay in place like so, and then when you're done with them, just push 'em in and they'll give you that nice retracted, recessed look. So very easy to pull 'em out so that they're up, easy to hook onto, and then push 'em down to get rid of 'em when you're not using them. So very nice retractable design here. They are going to use gravity to pop down when you're not using them. And then they have that little catch on the bottom that holds 'em up in place.
So to get these installed, it's gonna be pretty simple. Some models will require you to trim your rail cap for proper installation. If you have the 2009 and newer Ram, it would be good to use both of those, the saw bit and the router bit that you see on the screen there to open up your stake pocket to get these installed. If you have a Tundra Crew Max with the non-removable pocket caps, or the Santa Cruz, you you just need the router bit, you wouldn't need that saw bit. But those are gonna make it much easier for you to get these installed, to get those stake pockets opened up. Once they're open it's very simple to get these installed. You'll just remove the two screws here, so that's gonna give you a little bit of wiggle room so that you can adjust these, get them angled down into the pocket, and then just pull up on that ring, that's going to pull this center portion up, and it's going to catch on the sheet metal of your truck. So it's gonna have a nice solid connection point there. And then you'll just reinstall those screws, and it will operate properly for you with that nice connection to your truck. So overall, I think these are gonna be a great option for you if you are looking for a more convenient anchor point than the ones that are inside your truck bed. These do come with a lifetime warranty, so if you we're to have any issues with them, you're more than welcome to reach out to us here at etrailer.com. But overall, I think these are gonna be a really great option for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 5.0 out of 5 stars (1 Customer Reviews)
These 1,000-lb capacity truck bed rail tie down anchors stay out of sight and out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.Went in easy.Flush mount.
Do you have a question about this Truck Bed Tie Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.