To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.
Features:
Specs:
If you have pop-out rail caps you can install the anchors in seconds. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
If you have truck bed rails with hidden stake pockets that don't have pop-out rail caps, a router and a drill with a 1/2" bit (not included) are required to install the anchors.
The router bit (sold separately) lets you perfectly trim the caps without damaging your truck bed. To install the anchors, drill a 1/2" hole in the center of each rail cap and use the router to make the cuts. The router bit has 4 roller bearings that guide the router around the inner steel pocket to prevent overcutting the surface of your bedrails. Cut around each perimeter several times so that all the plastic residue resulting from the cuts gets trimmed away. Once the caps have been trimmed you can install the anchors.
If you have rear stake pockets with an inner plastic shaft, use a router with the rotary pocket saw bit (sold separately) to remove it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at these BullRing Retractable Truck Bed Stake Pocket Tie-Down Anchors. These are heavy-duty anchors that are going to install in the stake pockets on top of your truck's bed rails. They're gonna provide the tie-down points to secure your load. These are going to provide a better angle of pull for your tie-downs, they're also gonna be much easier to reach in the factory anchor points that are inside your bed. These are designed to work specifically with your 2014 and newer GMC Sierra and Chevrolet Silverado 1500, 2500, and 3500.
You are going to get two of the anchors here that will allow you to install in your two front stake pockets closest to the cab. These do have a retractable design, so it's going to allow you to easily snap the rings up, lock them into place when you're ready to haul, or you can push them down when you're not in use, and they're gonna be out of sight and out of your way there. This does feature a surface mount housing that's gonna provide a from-the-factory sort of look, it's gonna be compatible with many tonneau covers, so great option there when they're not being used. These do have a durable stainless steel construction, so that is gonna help resist rust and corrosion, it's also gonna provide a 1,000 pound weight capacity. These are very easy to get installed, especially if you have a truck with visible stake pockets or if you have hidden stake pockets with the pop-out caps, you just simply pop those out.
If you do have hidden stake pockets without pop-out caps, there are routers and tools that will be required, but we do sell those separately here at etrailer.com. Once you have those holes open, basically, all you have to do is back out these two screws here, and it's going to allow the lower bracket to hang loose there, so you can angle that in to your stake pocket, then you just pull up on the ring that's going to catch the lower bracket on the truck's sheet metal, and then you can just reinstall those screws to give you that a nice snug fit there, make sure that it's gonna be nice and strong for you. These do come with a lifetime warranty, so if you we're to have any issues with them, you're more than welcome to reach out to us here at etrailer.com. But overall, I think this is gonna be a great way to make it much easier for you to get your tie-downs secured to your truck's side rails. That completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (6 Customer Reviews)
These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.2023 Dodge Ram 1500 Tradesmen
The tie down’s worked great for securing my bikes
The Dodge bedliner cutout marks matched perfectly at the rear but the front marks were off see pictures
Had these installed professionally. They work great. No interference with trifold solid bed cover.
good product, but became loose after a couple uses. Will try and tighten again.
This neat little addition to the truck is easy to put in and looks custom. The hardest part is getting it out of the package :) The price was fair and delivery was spot on. I am an Etrailer junkie and will continue to be so. They have so many neat things one could go broke just customizing. The customer inquiry response on all issues is phenomenal.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.