Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This amber light can function as a front side marker or clearance light. PC rated. 9" Long pigtail has 0.180" bullet connectors.
Features:
Specs:
Maintaining a functioning lighting system for your boat trailer is required by law. Make your life simpler by installing lights that you can trust be to be submerged regularly. The housing and lens of this light are sealed together to create a single unit, which means that water will not get into the light to damage the diode or circuit board. Also, a special urethane potting is used to encapsulate the circuit board, further ensuring protection from moisture and dust.
A PC-rated light produces a 90-degree angle of light on either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the front corner of your trailer to act as both.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Let's take a look at this submersible Amber LED mini clearance or side marker trailer light. Now with this little one inch round waterproof LED mini trailer light, you're gonna be able to haul safer by alerting other drivers of your trailer's position and direction of travel. This light functions is both a clearance and a side marker light when properly mounted. And as you can see, this is really bright even with my studio lights on here. But just to give you a better demonstration of its effectiveness, let me go ahead and turn my studio lights off here, and you get a better demonstration of the brightness and the light that it gives.
I'm gonna zoom out here and then just shine this on the wall behind me. So this one Amber LED underneath this amber lens is rated for up to 100,000 hours of operation. It's energy efficient, long lasting and vibration resistant. This is a PC rated light meaning it produces a 90 degree angle of light on either side of its center line for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light.
Rather than buying a side marker and clearance light separately, you can mount this single PC rated light at a 45 degree angle on the corner of your trailer to act as both. Now this sealed waterproof light includes a durable polycarbonate housing and a UV resistant lens. The circuit board is of a military grade construction, and the urethane potting is gonna give you better protection than the common epoxy potting. This has an IP rating of 68, and this is 12 volt DC compatible. As you can see, it's a two wire pigtail with 0.180 male bullet ends.
And that wire length, I'm gonna go ahead and pull my ruler out here and just confirm that with you. I'm gonna line this up so you can see that. So from behind the light all the way to the end here, we're sitting at about 11 1/2 inches long on that wire length. And this is a recess mount installation and it has a grommet included with this as you can see. And the installation does require a three quarter of an inch in diameter cutout.
And this light is about 7/8 of an inch thick. Now on this product page, we do have a diagram with some additional measurements that I did not cover with you today. So if you are in need of some other measurements, you can find those on this product page with the diagram. This does meet or exceed FMVSS 108 standards. And this does have a limited lifetime warranty. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 4.7 out of 5 stars (86 Customer Reviews)
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This amber light can function as a front side marker or clearance light. PC rated. 9" Long pigtail has 0.180" bullet connectors.
a fun little project, I put new tail lights on my trailer and found out I had one bad wire , so I pulled new wires and added these onto my Roller guides , look really nice!
I would definitely recommend purchasing! These are my favorite style of side marker lighting, small but bright.
These LEDs are an exact match for my SportTrail trailer (custom for a 26' center console). They are MUCH cheaper to purchase from here than direct from SportTrail.
Would definitely purchase again! These are my favorite style of side marker lighting.
Would definitely purchase again! These are my favorite style of side marker lighting.
These mounted cleanly in the fenders with in the provided rubber grommets, making them nearly flush with the surface, yet has 180 degrees of light. I wired them into the existing running lights and are BRIGHT, day and especially at night! Now, I can see the where the trailer is when backing. Submersible too, which is a terrific bonus. I discovered that unlike most LED lamps I've used, these must be connected black to positive and white to ground. I did not find this small detail in the description, or the video which shows connecting to two alligator clips which were both black. This needs to be clearer, but overall, ETrailer has done it again, with items we need to keep things usable and safe.
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
I replaced a Tail Marker on my flatbed truck. This one was was exactly like the existing lights and matched perfectly.
This works perfect, I'm very happy with this marker light. Thank you.
Great quality product and fast shipping
These little lights are bright and perfect for a 3/4" hole. Easy to install and wire up.
As always Etrailer has a great selection of parts and great service.
I’ve always gotten good service and products from E Trailer
Great product
Parts were as descibed at a great price and arrived in a timely manner.
Fast service, very pleased.
just what I needed to fix my trailer
Thank you, great transaction
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.