Summer Starts Here - Save up to 70%
4" Round. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, I'm gonna take a look at the Optronics Round Fusion LED Hardwired Stop/Tail/Turn/Back-Up, and Warning Trailer Light. Has the red and the clear lens. Now, this is a round trailer tail light. It has a nice smooth bright red exterior and it serves five functions. And I do have this hooked up to some 12 volt power, so we can go through those functions and show you what they look like.
So, I'm gonna first turn on our 12 volt power and you'll see the first function comes on as the tail lights. We'll go ahead and turn off the overheads, and there's your tail light function. You can see what it is, is outer band of 10 red LEDs that light up. And then when you apply your brakes, you notice those same 10 red LEDs will brighten to let people know you're apply your brakes. And then if you turn on your turn signal, you can see that same outer band of the same 10 red LEDs will brighten and flash to let them know what direction you're turning in.
And the other feature is gonna be the back-up light. So, what we're gonna do with that is we'll take our, hook up our back-up light and then just to show you when you go into a reverse, what's gonna happen, you'll see that center white X lens right there, it's a clear lens. For the back-up light, there's six white LEDs there that you'll notice will light up very bright. So when you go into reverse, it'll let people know behind me that you're going to back up. And then what's unique on this light, what I wanted to show you was the, it has a orange and a green wire and those will hook-up to a warning light if you wanna have a warning light on this light here.
If you take the green wire, that's gonna give you an amber warning, and I just wanna show you that. If we hook-up the green wire, and you hit your warning, you'll see that the green wire's gonna get you four amber LEDs that'll flash as a warning light. Very bright. And then the orange wire we mentioned, if we hook that one up, again, just separately, and if you turn on your warning function, you'll see that it's gonna get you those six white LEDs in the same center lens there, lighten up in a flashing there. Now, if you hook both of them at the same time, the green and the orange, you'll notice what's really nice, it'll get you a warning light that'll alternate.
In other words, you're gonna have the four amber LEDs, and then the next one is the six white LEDs, so they'll go back and forth between the two. So, it gives you a nice warning light function. Now, this light has 20 LEDs total on it. It will get you four flash patterns and can be synchronized with multiple lights on the vehicle or trailer. And it is, they do have two wires, a blue and a yellow wire that we'll go through at the end here. I'm gonna go through all the wire colors and tell you what they do. Turn off our power, turn back on our overhead light. We'll disconnect this. But before I go through the wires and the colors, what I wanna go through is some features on this light. It is a sonically sealed waterproof housing and lens unit, which makes it submersible. It does use durable SMT Technologically which is Surface Mount Technology. And that's the construction of the LED circuit board, it'll let you better withstand shock and vibration, and allows for improved heat distribution. We mentioned they use LEDs in this light, so they do make great replacements for incandescent lights, 'cause they'll last 50 times longer, they're more efficient, 'cause they'll provide brighter light with less power output, and of course no bulbs to replace or brittle filaments that are gonna break. And you do get lifetime warranty on the LEDs. You can see it has a red lens, has an inside clear X lens in the middle, uses red, white, and amber LEDs. Basically, the red lens will have red LEDs for stop, tail, and turn. The clear, we showed you, lens, has white LEDs for back-up, and also white in the amber LEDs for a warning light. This is a flush mount design light, you can see it comes with the built-in black flange. It does have the three holes that you put your screws in. Now, it does not come with mounting hardware, you would have to supply that. It is hard-wired, it's all ready to install. The wire length is about eight inches. And now we'll go through the colors of the wires I mentioned. Basically, what we're gonna have here, is we'll start with the black wire and the black wire is gonna be your tail light wire. The white will be your ground wire. The red wire is gonna be your stop and turn. And the brown is your back-up light. And then we mentioned the green, that's gonna get you the amber warning feature. The orange will get you the white warning feature. And then we mentioned the blue and the yellow, those are the two that you'll hook-up. The blue will get you the different flash patterns if you want to switch. And the yellow will sync if you have other lights that you wanna hook-up on your vehicle or trailer. This yellow will sync all the lights together that have these features. This light is DOT compliant, Department of Transportation Compliant, does meet the Federal Motor Vehicle Safety Standard 108 Requirements for automotive lighting. It is a 12 volt light. Last thing is just give you a few dimensions. We're gonna do the overall diameter, including the mounting flange, so there's 5 1/2 inches. The light face, just the light face is 4 1/4 inches. And the depth of it right at one inch deep. But that should do it for the review on this Optronics Round Fusion LED hard-wired stop/tail/turn/back-up, and warning trailer light.
Average Customer Rating: 4.7 out of 5 stars (232 Customer Reviews)
4" Round. All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.Works perfectly. I had ordered a set a year ago or longer and one of them developed a short , so after hours of trying to figure out what the problem was, it was one of the lights I am replacing with this order.
I bought this set to install on the back of my enclosed overland trailer.
On occasion, i carry a basket in the trailer hitch location and my stock lights get covered. The Fusion LED lights were easy to install, very durable and are super bright. At night you can see them from a great distance!
It was an easy install since my trailer wiring harness already had the wire there for the backup lights (on my trailer you only get the backup lights if you buy the more expensive $$$$ upgrade package from the factory). For basic safety reasons I think travel trailers should have a backup light anyway. Lights are surprisingly bright and I would do this again since it was relatively easy. Also,those WAGO wire connectors with some electric tape made this job go very smooth and know that my connections are secure.
Good replacement for an existing light on our travel trailer. Trailer was wired for backup lights but none installed. This unit will give me tail, turn, brake and backup lights.
Measurements for mounting holes was exact. Did not have to drill other holes. This is a surface mount. I did have to modify the reflective trim ring that was on my original light for it to fit the new light. The housing on this light was slightly larger but the overall dimensions were the same.
Some grinding on the trim with the drimmel tool solved the problem.
Would be good for initial installation also. Initial installation would require a hole near the center of mount location to allow wiring to pass through trailer. Seems to be a quality product.
Attached photos of lights installed.
over the years Ive ordered a pile of parts, lights etc. and they have always shown up on time or actually a little earlier then told. keep up the killer work
Great product! Easy to install and the built in reverse light makes backing up my car trailer MUCH easier at night! Color coded & labeled wires make connection a breeze.
The lights are great, they are well made and are holding up very well. The LED's are bright, so far so good. My only issue with the lights was not being informed in advance that they wouldn't work without a wiring adapter and cutting up of my wiring harness. I probably would have bought the lights anyway but more informed purchasers are happy purchasers and finding the lights you just purchased wont work without an adapter, well not good.The problem wasn't with the lights it was with Etrailer.
Hello Carol, I ordered September 17th, I was supposed to receive September 22nd.
I received everything on September 29. If you look at the path of the package before the package arrives at my house. All the places that we can visualize where our package has gone.
One of the rear lights has been changed, everything is correct.
I hope this can help you with future submissions.
Have a nice day.
Excellent service and expedited delivery! I ordered the wrong tail light not once but TWICE and the customer service was outstanding. They sent me a return shipping label via email and also emailed me during the whole process for returning the items that were wrong to answer any questions and make things as easy as possible. Very impressed. Also, can’t forget to mention I paid for standard shipping and received the items within 48 hours each time!
Great customer service. Had a delay in product availability, but they communicated it and kept me up to speed the whole time. Will continue to order from them!
Great addition to the rear of my Hummer H1
The order came in quicker than expected, packaged well and we are very pleased
you were the only place that had the light I needed. ordering was easy, shipping and delivery were fast
Absolute garbage I had a custom built trailer with custom wiring and a lot of time and effort was put in to make sure that these lights did not fail I used aluminum rivets with nylon spacers fully soldered connectors with adhesive heat shrink and the lights still failed. Unfortunately I have not reached out to to see if they have warranty. But, unfortunately the money spent already to build a separate housing for these lights will cost me in the long run due to the fact I can now only run the similar light. Very unfortunate they have not tested these lights thoroughly enough.. do not recommend. Especially for salt water.
Easily replaced my lights on the cargo trailer and they look great.
Works great so far no issues nice and bright not had a bulb blow out yet!
Web site is so easy to use. Parts are available and ship quickly. Kept in formed through the shipping process. Items arrived when scheduled. Have very please with the performance of the LED tail light.. 5 stars for this company and customer service...
I just got a new boat and had damaged the trailer light no other place around had a matched light even the large outdoor shop (starts with a C) sold me the incorrect ones for $60. Then as frustration started impacting me. I saw etrailers online, saw a light that was identical, took a chance and it was the exact light for only 1/3 of the price I paid at the large outdoor store. End result, I'm very pleased with my purchase, shipping and overall.
Please see attached photos of my lights installed on a trailer.
These lights are a direct replacement for the stock optronics stop/turn/tail lights on my Sundowner horse trailer. It was pre wired from the factory for backup lights but none were installed. If you pull off the rear right side light cover of the trailer there is a yellow wire that is capped off. Double Check with a light tester that it is the power wire for reverse lights. I drilled out the old rivets and installed the new lights with the reverse light wired up to the yellow power wire
The leds are nice and bright for all functions
Great product & wonderful service.
These lights are great on my PU camper , a little over priced - probably as they are waterproof. Very bright back up and break/ turn lights . Running is more subdued, so as not to be mistaken for breaking
Used on our off-road teardrop trailer. Install was easy. Quality appears robust. Holding up well after a year, though half that time was sitting as we had a long winter here this year.
Purchasing with etrailer.com was easy, quick and the product arrived when estimated. Excellent service. This light bar was exactly what we were looking for.
I purchased these to spruce up an old fold-out tent trailer that I bounce around out in the hills. They were easy to install and draw almost no current compared to the old incandescent lamps.
I wired it so when I'm camped, I can run the reverse lights on the trailer battery to light up the camp site instead of having to carry around a flash light.
Great value, and they work well also. You can't go wrong with etrailer lights.
Need to return. Turns out my trailer only has 2 wires, tail stop and signal. backup will require additional wiring.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.