Tandem-Axle Trailer Hangers for 2" Slipper Springs - 5" Front, 6-3/8" Rear

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - H238 Review

Today we're going to take a look at the tandem axle trailer hangers for 2" wide slipper springs. Now these hangers will suspend your leaf springs from the frame of your tandem axle trailer. These are designed for four leaf springs. Now the leaf springs we do sell separately on our web site. Also on the product page of this part there is a chart at the bottom of the page and it will help you determine the hanger location based on the type of leaf springs you use. These are designed to be used with equalizer kit part number AP202 or AP216. For a complete kit, and we do sell those kits separately on our web site, and these kits are what will include the equalizers, the bolts and the shackle straps for installing these hangers. Now this will include all of these parts here.

The two 5" tall front hangers that have the 9/16 diameter bolt holes, the two 4-1/2" tall center hangers with the 7/8" diameter bolt holes and the two 6-3/8" tall rear hangers with 7/16 diameter bolt holes. Now these are designed for use on trailers with tandem 3500 pound to 8000 pound axles and they do not include the components for mounting the axle to the springs. But when they do the measurements, I want to show you where the measurements are on the hangers. The front one, these are 5" and that's measured from the center of the bolt hole to the top of the hanger. So if we put our ruler and go from the center to the top, you can see 5". The centers we're called 4-1/2" and it's the same measurement from the center of the hole to the top and there is your 4-1/2".

And on the rear ones they we're measured at 6-3/8". So if we go from the center of the hole to the top, it's 6-3/8". But that should do it for the review for the tandem axle trailer hangers for 2" wide slipper springs.