To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Toyota Tundra's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hitch does not fit vehicles with TRD or Sport package. Vehicle is factory equipped with a 4-pole wiring harness tucked behind the bumper towards the middle. No drilling required for installation
Average Customer Rating: 4.9 out of 5 stars (31 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.I recently purchased a hitch set up for my Toyota Tundra. I installed the towing kit without having to drill any holes. It arrived in a timely manner and I am very pleased with cost and the product!
I plan to pull a trailer withe towing package. I also purchased a bulldog lift for a work related piece of equipment that also worked very well.
This review will only cover the installation of the hitch since I haven't towed anything with it at this time.
The installation was relatively simple, and I was able to complete it without any assistance. Laying on my garage floor I pushed up the tow bar in the middle with one hand and screwed in one fine thread top bolt on the RH side and then maneuvered my hands and did the same on the LH side. Screwed the other two bolts in the top angle and hand tightened. Installed remaining bolts per the instructions without a hitch. (no pun intended) Tightened all of the side plate bolts first and the four top fine thread bolts last. This allowed the side plates to pull up nicely with the bumper support thingy. The only problem I had was I didn't have a socket and wrench for the 1/2" bolts. The size is not specified in the instructions or they have changed the type of bolts. The other bolts were 19mm and 17mm which didn't match the instructions either. Fortunately I had purchased a metric set of sockets and wrenches up to 19mm. Had to borrow the stuff for the 1/2" bolts from the neighbor, which I really don't like doing.
Ultimately the hitch is very well made and easy to install. Fit and finish are excellent. :)
I have yet to pull with this product so I can only comment on the install. I have a 2012 Tundra and the hitch did not sit flush with the frame rails. There is definitely a gap in between the frame rail and the unit (the side, not the top mounting portion), but its still a solid connection due to a total of ten bolts on the installation. The other problem I had was this hitch extends farther out than others I have seen (~4 inches past the bumper). This inhibited me from using the factory mount (where the 4 pin was) to hook the 7 pin plug (part ETBC7) and I had to fabricate my own mount. Good product but gen 2 Tundra owners might want to be aware of this.
The installation was simple, the hitch fit perfectly, and the protective finishes have held up perfectly - not one speck of rust after one year. I also have purchased another hitch kit for my 1997 Acura - same thing, simple easy installation and has performed perfectly.
Great product, easy to install. Since I had to do the job by myself, I attached the unit to a supporting 2x10 (plywood would also work) and used a pair of auto jacks to slowly lift the hitch into position. Once I made contact with the truck, the hitch remained snug and I could insert the bolts as directed. I had 'er done in about a hour.
Etrailer was on point with their customer service.
Tech notes made it easy to determine that I was getting the right hitch. Installation was easy. Shipping was fast and actually made it earlier than expected arrival. Thanks to etrailer and also Curt hitches for all the right info. Very satisfied and would recommend both etrailer and Curt to anyone who wants great service and quality.
I received this on time as communicated. Product is as advertised on the site. Easy directions and I installed myself within a couple of hours. I will recommend etrailer to friends in the future.
This was a very simple install; it took me a lot longer to get the original bolts loose and off the truck than it did to install the new hitch. Went on perfectly, no hassle with lining up the bolts and looks great, too. Highly recommended.
The product came when expected. All parts were there and it was very easy to install. The hardest part was removing the factory brackets on my 2016 Tundra.
MY WIFE AND I INSTALLED THIS TOGETHER IN 35 MINUTES. IT FIT PERFECT AND LOOKS FACTORY. AFTER DRY FITTING AND LOOSLY TIGHTENING ALL OF THE BOLTS WE MADE SURE IT LOOKED GOOD FROM THE REAR AND WAS CENTERED. WHEN TIGHTENING ALL OF THE BOLTS , MAKE SURE YOU TIGHTEN THE 3 SIDE PLATE BOLTS FIRST. THIS WILL PULL THE PLATES TIGHT TO THE SIDE FRAME. THEN TIGNTEN THE TOP 2 TOP BOLTS.
Not a perfect fit. Installation went as expected... no real problems. Directions good. Web site tutorial quite helpful. I would buy again!
recieved hitch and had it in stalled in about 30min.s by myself no help from anyone very well pleased with the hitch thanks
Bolted right in just as described! Just had to trim the 4 large washers a little bit with a cutoff wheel because they are little too wide. Other than that, very straightforward install.
just like described
installation was a snap
shipping was fast fast fast
I am very happy with my item. It has been a pleasure doing business with you.
Tomas M.
10/8/2015
Perfect
Took less than 45 minute to install ,fit perfectly. Shipping was fast. This is our forth hitch we have order with you and will contunue to do so.
It was really easy to install very good Hitch
Excellent quality, best product, holding up strong
The trailer hitch fit perfectly and was easy to install (other than wrestling to get the existing bolts off the truck). Your service was excellent! I would use your company again without hesitation and would recommend you to anyone.
Thanks for a great product and great service!
great product,,, fast shipping,, thx
I was totaly surprised at the ease of installation correct and precise fit. I expect to be completely satisified with the use for which it is intended
Easy to install very good looking unit
Quick ship! Very strong will work perfectly for my needs!
Great Product
Great service
Fast and free shipping.
What more can you ask for.
Good stuff
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
J. B.
12/10/2015
Works as expected