To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Lexus RX 350 trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation , Plastic air deflector/fascia must be removed for installation and may be left off or trimmed and reattached , If equipped with the lateral performance damper, the damper will need to be removed to install this hitch.
California residents: click here
Complete Towing Package for 2015 Lexus RX 350
2015 Lexus RX 350 Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular RX 350 Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (188 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Very pleased with advice I received from customer service about my recent purchase of a hitch and wiring harness for my 2013 Lexus RX350. All my questions about the best hitch for pulling our boat and outboard motor were answered. The order arrived on the scheduled delivery day, and was packaged in a convenient carrying box. All necessary parts and hardware were included with the delivered package. I installed the hitch according to the available online installation video, and the enclosed illustrated installation diagram. The installation went well and there were no installation glitches. I'm impressed with the quality of the product, which is solidly constructed, and it fits my RX350 exactly. I recommend etrailer to customers seeking reliable customer service advice, well-constructed quality products, and on-time delivery.
The installation is straightforward, and with the trimming of the bodywork, its a truly custom/oem look and you absolutely cannot see the crossbar from the rear of our RX350, only the protruding receiver itself. It looks and functions great, HOWEVER...
After using a bike rack and other things, it has become apparent that there was a slight manufacturer defect in this hitch where the square receiver is welded in crooked and clocked to the right (clockwise) ever so slightly. No effect to trailers due to being on the ball hitch, but with bicycle racks, or a basket attachment, they will appear crooked or bent over to one side due to the square not being straight. It took some time to figure this out and by then, the hitch had been well used and not worth trying to return so there it remains. We thought our bike rack was bent. On other vehicles its perfect. Same as the basket attachment. Hard to spot with the naked eye but once you see it, you can't un-see it. So the trailer hitch is a good design but sadly ours was defective. It's functional but flawed.
Jennifer
4/13/2024
After a year the hitch is still here and part of the vehicle. It will never be removed. Definitely an upgrade and I cant imagine having a vehicle in the stable thats unable to tow something. This one doesnt detract from the vehicles looks whatsoever.
This is my second hitch purchased through eTrailer
As did the first, this hitch fits perfectly and included great instructions and the exact bolts needed for my vehicle.
The YouTube video was also a great help to visualize the assembly and mounting process.
Purchasing was easy and shipping was fast!
Thanks eTrailer!
Michael R.
6/6/2018
It’s working out really well. I hope the review helped. I own a software company and realize how important quality reviews are to a business
I had prepped my Lexus prior to the hitch being delivered. The video was an extremely great help locating all the bolts, screws and plastic plugs. My only trouble was with the lower appearance panel placing it back on. I had to do a little additional cutting, slightly more than the video showed, but than again the video was a RX350 and mine is a RX450H, so there may be some difference there. But the install was easy, I did it by myself, carefully, and am a very happy camper. Now if only we were able to go somewhere.
David
4/3/2021
Great!Perfect fit.
I chose this brand because it is symmetric left to right. The other brand is not. I believe the other brand likely chose to be different left to right so the hitch could accommodate the exhaust pipe better. This hitch requires that you install the exhaust hanger on the hitch, quite a bit lower than stock. This is, in my view, sub-optimal. There are more stresses on the hanger rubber, and the pipe is closer to the ground. Had I know this I would likely have chosen the other brand. Hopefully the image I uploaded shows you the concern I have.
Chip
1/17/2022
Hitch has worked as expected to carry my bike rack around. No rust, no durability concerns. Exhaust, although lower, has not been affected by its lower position.
Easy to install. Great video instructions to help along the way.
Looks great on the vehicle.
RX 450H 2012
I can only add to the other reviews that I installed this on my own. To lift the hitch into place I lifted one side, installed a washerless bolt and repeated on the other side. This allowed installing the other bolts with washer easily. Also I did this on the ground although I had access to several forms of lifts. Lifts are not required.
The plastic under shield had mold in lines near the hitch- I followed these. I also found a hacksaw to cut easily and that a razor knife with 3-4 scores was better than cutting through in one slice. The side cut for the hitch I measured from a mounting bolt and guestimated. The mounting hole can be seen in the image and the marker just made out.
I had a scheduled hitch installation, arrived for drop-off, and was advised that "We don't install on Lexus, you need a special tool to cut the under-bumper trim panel". This was very inconvenient, as I needed it for a Boy Scout canoe trip the following week. I was directed to your site by our Assistant Scout Master who assured me this was an easy installation. Your site directed me to a series of appropriate hitches, I selected this one and an electrical hook-up, placed the order on Wednesday 6-14-2017, scheduled to arrive Monday 6-19-17, but arrived at 11:00 a.m. on Saturday 6-17-17--bonus! In a light rain, with no stand jacks (I was going to borrow some), it took me about 40 minutes to do the mechanical and electrical installation. More than half of that was getting the trim panel off, as I had to awkwardly scoot beneath the car. It took another 45 minutes to trim the panel, initially with a plastic blade of a jig saw, final trim with just a utility knife (so much for "special" Lexus tools!). I had to abandon re-mounting the factory tie-down points, as there was slight metal interference with the cross bar of the hitch. I have a grinder and could have made it fit in another few minutes, but I have no need for the tie-down points, I nevertheless kept them for potential future re-installation.
The directions were spot on good, everything fit perfectly to the car. There was some slight ambiguity with the side cut for the trim panel--I'm sure there's a better diagram of that cut online somewhere, but with fouled hands and being pretty well soaked by rain at this point, I just did the final fit by trimming and test fitting until it worked. Photo attached. So now I have the hitch--beautifully installed, I humbly add--and I saved over $200 dollars over what U-Haul wanted for their hitch.
Installation was very easy and straight forward. Cutouts for appearance package on the passenger side of the appearance panel are a bit larger then required but overall not an issue (template in the instructions would be nice). Relocation of exhaust hangar as depicted on the installation guide is required in order for the hitch not to rest on the tail pipe. I was able to complete this project by myself with the vehicle in my garage, a impact wrench was need to remove the bolts holding on the tow hooks.
Very Clean install. Installation video was concise and easy to follow. Between the Trailer, trim cutout, and electrical install with Item #118252, I was done start to finish in about three hours.
Very good fit and easy installation
I ordered and received a trailer hitch and wiring kit for my 2015 RX350 and also received a very informative video with it. It fit great and is almost invisible and no drilling was necessary. The only issue I had was I was supposed to reuse 2 of the bolts to rehang the exhaust but my bolts were tapered on the end and wouldn't fit so I had to use some generic bolts. But it's still a great product.
Joseph H.
2/16/2021
Im just as happy with the product now that Ive had it a year as I was originally
Quality product. All hardware was there in spite of the fact that my unit may have been a return. I don’t know if a cosmetic plug was included but my unit did not have one. I’m a mechanical engineer who studied welding and can tell you they have good QC in that regard. Also …. Re: fit and finish …. The holes lined up well. I also appreciate the Bellville type heavy duty ‘lock’ washers. I’d recommend /buy again.
Bought this 1 year ago… excellent quality, shipped fast great customer service. I couldn’t be happier with everything. I would totally recommend this company.
Install was a breeze and the product feels very sturdy. Everything needed was included. Only issue was the instruction sheet included was for a Dodge Dart but no worries, the install video more than made up for it.
Hitch doesn't stick out and looks like it is supposed to be there.
Well engineered ,Easy to install (One error, bolts for muffler bracket are too short. )
Fit perfect, works like a charm!!!!
Installation was easy. Good quality, recommend. Have only used it for a bike rack.
I have never had a trailer hitch before so I'm no expert. However, the build quality seems to me to be excellent. Good welds, nice paint. Looks well made and seems heavy and strong. Installation was a breeze! The instructions were good but the online videos provided were invaluable! Excellent. I installed this on my 2013 Lexus RX350 in about an hour with the help of my son. Really the only help you might need is to lift it in place to get the first bolts started. It's just easier for two people. Other than that, it's an easy one man job. Used it about five times already and have had no issues except for hitch rattles. Annoying but normal. Highly recommended.
Daniel
2/24/2019
No issues, it just works! Ive hauled stuff on average about once a month and have had absolutely no issues with this hitch.
this will be the third hitch that i purchased from e-trailer.mainly to use as a bike carrier-rack.very good quality products,easy to install and fits nicely on vehicle.i do use a floor jack placed in center of hitch to lift and keep in place until i get the bolts in place.this will be the first time for me cutting underside plastic cover around center of hitch.order was here in four days from the time i placed the order.
George R.
6/18/2017
excellent
This was my second trailer hitch. The unit was fairly easy to install and works as advertised. My once complaint is the appearance of rust on the interior of both units after ~ 8 months. The unit doesn't appear to be high quality steel. I use the units to transport bikes as opposed to anything heavy so I can't state that brittle fracture wouldn't occur if I tried to pull anything of significant weight. That said, I think that hitches are excellent for my purposes.
Brooke M.
6/14/2022
One thing you can try is using a hitch cover like part # 22282. It would cut down on the amount of water, dirt, and debris that is able to get into the receiver while not using your hitch.
Installation was relatively easy. I had to modify the tie down on the right side to permit re-installation. Trimming the skirt could have been helped by a template for cutting out the segments. The wiriung kit was easy to install, but a grommet for leading the wiring lead to the hitch would have been helpful.
Thomas J.
6/18/2019
I have used the hitch several times with no problems. The heaviest load I have towe was about 1,200 lbs. I have also used the hitch with a bicycle rack with no problems.
Overall the installation of this trailer hitch went well. It took my son and me about 45 minutes to install it.
My only disappointment is that the tail pipe does bump (and rattle) against the hitch particularly when driving on bumpy roads.
A separate issue from the hitch is that the bike rack I inserted into the hitch now sets off my back-up sensors any time I put the car into reverse- very annoying (but not an issue of the hitch).
Patrick B.
11/26/2012
Most newer vehicles have a switch somewhere on the radio dash or steering that will deactivate the back-up sensors. You can turn them back on when you do not have the bike rack installed. Some vehicles that do not have this switch can have the alarm turned off at the dealership.As far as the hitch rattle, it does happen from time to time, but we have a collection of fixes to get it to go away. Most often it is caused by the position of the exhaust. Since the welded hangars on the exhaust pipes dont have to be exact, you will find variance from vehicle to vehicle. Often times a pair of pliers and a quick tweak of the hangar is enough. Or you can swap out the rubber isolators for a different size to move the pipes some. We have got a whole FAQ and Help article written on the subject below. www.etrailer.com/faq-fixing-exhaust-rattle.aspx
The hitch went in easy and appears to be very well constructed, however the tail pipe rests up against the hitch causing vibration noise when driving. Mechanic said he has seen other hitches that include a bracket or have a bend at the point of contact. I have to my car back so the mechanic can do something to lower the tailpipe.
Victoria B.
8/26/2019
Because of loose tolerances for the location of a vehicles exhaust system, a trailer hitch will sometimes make contact with a muffler and cause rattle. I have attached a help article with some helpful tips on how to correct this rattle.
Helpful Links
I am very satisfied with my trailer hitch and would recommend etrailer to anyone.
Mike M.
9/5/2019
All is good.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Morris B.
5/29/2024
After one year of use,the Draw-Tite trailer hitch that I installed per instructions is performing well. No rust on the metal, all mounting bolts tight, wiring harness not cracked. I tow an 18-foot outboard fishing boat with trailer. This hitch is solidly constructed, and provides excellent service. Morris B.