Trailer Hitches and Wiring for a 2012 Lexus RX 350
Question:
for lexus 2012 rx 350 hitch,which brand sticks out the least
asked by: Ernie C
Expert Reply:
Out of the 3 trailer hitches available for your 2012 Lexus RX 350, there isn't one that sticks out more or less than the others. All 3 are pretty much identical in the receiver location, slightly recessed under the vehicle. You would not bang your shins on the receiver for sure.
When we installed Curt hitch # C13143 on a 2014 RX 350 it measured 5 inches from the center of the hitch pin hole to the back of the vehicle.
For Draw-Tite hitch # 75676 on a 2013 model, the hitch was also 5 inches from hitch pin hole to the back of the vehicle.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.
If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included to the right that explains how to measure to choose a ball mount to tow the trailer level.
And for trailer wiring use # 118252 if the RX 350 came with the factory tow package or # 118478 if it does not have the factory tow package.
Products Referenced in This Question
T-One Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: 2022 Chrysler Pacifica Hybrid 2 Inch Trailer Hitch Recommendation
- Q&A: Brake Controller for 2019 Ford Edge With Factory Tow Package
- Q&A: Will the Kuat Sherpa 2.0 2-Bike Platform Rack Block a Rear Backup Camera
- Q&A: Roof Rack and Cargo Basket Recommendation for 2015 Honda CR-V with Naked Roof
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Is Class IV Hitch Available for 2023 Lexus GX 460
- Article: How to Measure a Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Can Spare Tire Be Accessed After Mounting Curt Class III Trailer Hitch # 13530 on 2009 Lexus RX350
- Article: Rooftop Cargo Carriers
- Q&A: Will I Need to Remove the Spare Tire on My 2022 Kia Telluride when Installing the Curt Hitch C13420?
- Article: Trailer Wiring Diagrams
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch