To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.
Features:
Specs:
Setting up these tabless base plates for use with your Demco tow bar is fast and easy. They easily bolt onto the ends of your tow bar. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle, your car maintains a clean look when it's not being towed.
Using the Demco Tabless base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
Demco makes adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
| Type of Tow Bar | Adapter |
|---|---|
| Roadmaster Tracker, Falcon 2, Falcon All-Terrain, Blackhawk, Blackhawk All-Terrain, and Sterling tow bars with serial numbers up to 14,500 | DM9523036 |
| Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, and Sterling tow bars with serial numbers 14,501 and above | DM9523062 |
| Roadmaster Eagle and Eagle 8000 | DM9523014 |
| Roadmaster Falcon 5250 | DM9523023 |
| Blue Ox | No adapter needed |
| etrailer | No adapter needed |
| Demco Kwik-Tow | No adapter needed |
| Curt Rambler | No adapter needed |
Average Customer Rating: 4.9 out of 5 stars (205 Customer Reviews)
This custom-fit base plate kit lets you hook up your tow bar to your vehicle. Tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. Simple bolt-on installation.Great job
Relatively easy to install, works great, less obtrusive than other brands. Instructions are clear, quality is good. Shown with knuckles removed. As you can see, I had to improvise to mount the coiled cord socket and breakaway switch.
Love it,my bumper wasn't rated for towing so I had to go this route. Pleased it fit fine with the aftermarket bumper.
This base plate is of exceptional value and construction. It was fairly easy to install on my 2008 Jeep Wrangler by myself but would have been quicker if I had an extra set of hands. Overall I am extremely happy with how the base plate looks and the customer service was above and beyond expectations. I would recommend the base plate and you don't have to look anywhere else than etrailers for what you need.
I purchased this as part of a package which included; Hitch and wiring for my 2022 Equinox, Base plate, Tow Bar, brake System and connecting air hose, break away cables, LED tow lights with wiring harness, and a trickle charger to keep the Equinox battery from going dead while I was towing it behind my class A RV.
I had etrailer do the install of all the components on my car and RV. All the workmanship was excellent and done in the amount of time they said it would take. Also because they did not have a video of this equipment being put on this year and model vehicle, I gave them permission to make a video(which added a extra day and a half to the install)and the installation was free. Everything has worked perfectly and I couldn't be happier. Etrailer is my go to for anything towing and also RV parts.
I've used this setup for a year towing a 2023 Jeep Wrangler . I 100% recommend it for anyone else. Under normal conditions it is very easy. Under stressful conditions (bad weather, uneven terrain, need to connect/disconnect quickly) it is a life saver.
I am 63 and I can connect/disconnect this in 5 minutes.
I recently completed a DIY installation of the Demco Tabless Base Plate on my 2021 Jeep Wrangler. Installation is fairly straightforward following the etrailer.com videos. A couple gotchas on the videos.
First, one of the videos suggests removing a sheet metal plate to provide easier access. While it does make for easier access during removal of the bumper, you should reinstall it BEFORE installing the base plate. If you install the baseplate first, there is insufficient clearance for the bolts that hold the sheet metal plate.
Second, the videos show reinstalling the plastic air dam after reinstalling the bumper. At least on my 2021 Wrangler there is NO way you could do that without seriously bending, and possibly breaking the plastic dam. Reattach the dam to the bumper BEFORE reattaching the bumper. Clearances for rebolting the bumper are sufficient. I did it without a lift (thank goodness for the Wrangler’s high ground clearance).
Bottom line is it’s a bit of a project but looks great.
Eady Order, Very Fast delivery. Will update after base plate installation
I can’t say enough good about how great etrailer customer service is! Our trip was nearly a complete disaster after having a tow plate added to my jeep. We had planned to tow the Jeep and drive back to Maryland from Texas. After hours on a Friday night we found that the connectors were missing but we had to get on the road anyway, so my son drove the RV with my granddaughter and I followed, driving the Jeep. We kept trying to reach the installer but it was the weekend so we rented a U-Haul. Once we were able to ride together, we called etrailer. The parts we needed were expedited to my son’s home and now we can proceed to my grandson’s soccer tournament without having to use the U-Haul! THANK YOU ETRAILER FOR YOUR QUICK RESPONSE and saving the family trip.
So far so good. Packages came intact. Everything unpacked and looks ready to go. I’ll keep you up to date on the installation. Thanks Jessica and team for keeping me up to date on the delivery.
Installation went well! The pictures in instructions are a bit hard to decipher! Using it in a few days. It is a replacement my last CR V 2003 was totalled in an accident had a Blue Ox before seems comparable!
I have not installed my base plate yet, but the 5-Stars is for the service I have received from etrailer I was sent the wrong base plate which fit the factory plastic bumper mine is a steel bumper, but etrailer was great about the easy return and repurchase. Hard to find companies with such great customer service.
Will update this review after installation..
I received the parts from etrailer much sooner than expected. They ship very fast.
Unfortunately some of the hardware was missing. The box arrived a little beat up. The bag the hardware came in was torn open. It seems that a few nuts and bolts were lost in transit. Since my shipment arrived on a Saturday, I did not wait until Monday to call for replacements. I went down to local HW store and bought what I needed. Fitment was excellent and installation went very smooth. I will continue to shop etrailer for all my towing needs.
The video that etrailer had for the installation of this towbar was awesome. The only hitch was the brackets were mislabled (passenger and driver side were switched), but the video helped show how everything worked and how it should look. Goes very smooth with a helper!
Excellent service, was quoted free shipping online to Alaska, i didn’t believe it so I called in the order not only did I get the shipping free that was to cost 99.00 I was also upgraded at no extra charge to second day delivery. Part showed up on time and fits as described.
So far, so good. We have not installed the products yet but Customer Service, William in particular, was awesome! Super fast shipping!
As with all Demco products that I've purchased, this baseplate kit is extremely well engineered, expertly manufactured and work exactly as advertised. The installation instructions are easy to follow and understand. This is one worry free produce that will make our travels much more enjoyable.
Works well if you can get your bumper bolts out ;-).
Otherwise, was easy to install and tows perfectly.
Superb Customer Service and Communication!!!! Fast shipping...item delivered sooner than estimated. The baseplate seems very well constructed (as expected of Demco products).
entailer demonstrated its excellent reputation with this order.
Thank you!
Great product! Mostly easy installation.
Very good baseplate and easy to install. You do have to trim the front bumper a bit (1/2” wide by 3/4” deep) on the bottom to put it back on. The only issue I had were the outside factory screws on the skid plate that comes with this base plate. The factory screws are too short and I had to go buy 2 replacement screws to fit.
Took about 2 hours to install. That included gathering needed tools and putting them up.
Have not towed with it yet, but that will happen soon!!
The reinstall kit for the SMI stay and play duo braking system was exactly what I needed we removed it out of a 2012 Cadillac SRX and a RV shop will be installing it in a 2020 Jeep Wrangler I will send pics of the final installation later on this month ! Great product was delivered with all parts needed in three days and as usual great customer service !
I was very pleased with the service I received from Karl. The equipment was very well made. It seems the Demco baseplate and wiring kit are superior to the Blue Ox I’ve used in the past. Thanks for your service and products.
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.