Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas

Extang Tonneau Covers - EX94590

The Trifecta Signature 2.0 tonneau mounts using a self-contained clamping system, allowing for temporary use and rapid installation. Clamps to rails mounted in the truck bed - no drilling. This soft, tri-fold cover sports a matte black canvas skin.

Features:

• Custom-fit tonneau cover protects your cargo and your vehicle's bed from the elements
  • Aerodynamic style reduces wind drag, improving gas mileage
• Self-contained cover completely removes from truck bed
  • Attachment hardware is built into the cover - no separate clamps or bolts to install or lose
• Tri-fold design allows for partial bed access in seconds
  • Lift panel at tailgate to get at contents of bed
  • Fold up and secure rear and center panels to free up two-thirds of your bed
• Sturdy, fiberglass-reinforced nylon clamps ensure a secure truck bed when tailgate is closed and locked
• Snap-on rubber seals help to keep water out of your truck bed
• Aircraft-grade, rustproof aluminum bows and frame have durable black powder coat finish
• Premium, vinyl-backed canvas skin is permanently attached to frame
  • Durable canvas won't shrink or expand as much as vinyl
  • Matte black color and texture is super sleek
• Cover rests on top of truck bed side rails
  • Sits 1" to 1-1/2" above bed rails
  • Will not work with stake-pocket-mounted accessories
• Hassle-free installation with no drilling
  • Mounting rails install with brackets in your truck's factory tie-down hook bolt holes
  • Jaw-Grip clamps secure front panel to mounting rails at the cab
  • Spring-loaded EZ-Lock clamps secure rear panel to mounting rails at the tailgate
• Made in the USA

Specs:

• Approximate weight: 35 lbs
• Lifetime warranty

The Trifecta Signature 2.0 combines a soft cover look, a hard cover folding design, and an easy-on/easy-off mounting system for a truck bed cover that is both simple and stylish. The 2.0 features clamps that lock and are easy to install and remove, a strong frame and rugged hinges to support the cover, and snap-on rubber seals for better weather protection. This custom-fit tonneau looks sporty, shields your bed and cargo from the elements, and boosts fuel efficiency. It folds up two-thirds of the way or removes easily for those times when you need to haul bulky cargo or tow with your fifth wheel or gooseneck hitch.

Self-Contained Tonneau Cover

Simple is definitely better with the Trifecta. This tonneau is completely self-contained, meaning no assembly is required. There is absolutely no drilling required. And you can quickly and easily remove the cover to transport large cargo in a pinch.

The secret behind the Trifecta's simplicity and versatility is the built-in clamps. These T-style clamps fold up and store inside the bows of the front and rear panels of the cover. Just pop out the clamps, pull them down, and hook them to the included mounting rails. With all 4 clamps attached, the tonneau cover will remain securely in place.

Convenient Folding Design

The Trifecta's tri-fold design lets you easily access the rear of your truck bed. Just open the tailgate, reach under the cover, and undo the spring-loaded EZ-Lock clamps to release the rear panel. Fold the clamps back into the panel's bow. Then just lift the panel up to access the rear of your bed. The middle panel doesn't latch down, so it too can be easily lifted up.

When it comes time to haul larger cargo and you need to travel with your truck bed open, the Trifecta is versatile enough to let you do so without your having to remove the tonneau. Fold up the cover from back to front and secure it at the cab with the integrated buckles to free up two-thirds of your bed. For full bed access, just undo the Jaw-Grip clamps at the cab and lift the cover off completely. Then store it until next time. Note: You cannot drive around with only the rear panel open.

If the need suddenly arises to transport large cargo and you need full use of your truck bed, the Trifecta can easily be folded up, removed, and laid in your bed, giving you the ability to transport both your cargo and your tonneau cover at the same time.

To close the cover, simply fold down the panels front to back and reattach the EZ-Lock clamps on the rear panel. When your tailgate is closed and locked, no one will be able to get in to open the cover, thus helping to safeguard your truck bed and its contents.

Sturdy, All-Weather Construction

The Trifecta Signature 2.0 is built to last and comes with a lifetime warranty. The strong, lightweight frame is constructed of aircraft grade aluminum. The frame and bows have a black powder coat finish to protect against rust. The rugged hinges are made of glass-filled nylon with protective padding.

The tonneau skin comes permanently attached to the frame so you don't have to worry about any snaps coming undone or the fabric becoming untucked and blowing in the wind. The cover is sewn into the perimeter frame and corners instead of using the hook-and-loop strips found on other tonneaus. This integrated tuck system improves the appearance of the cover at the hinges and corners.

The vinyl-backed, black canvas skin gives the Trifecta Signature 2.0 an obvious edge over standard vinyl tonneau covers in both durability and looks. The 4 clamps are made of sturdy, fiberglass-reinforced nylon. And rubber seals run around the perimeter of the cover to help keep water out of your truck bed. These seals snap on for a more secure fit when compared with seals that attach with adhesives.

Easy, No-Drill Installation

The Trifecta Signature 2.0 comes fully assembled and couldn't be easier to install. First you must attach the included brackets to the included mounting rails, then remove the 4 upper tie-down hooks on your truck. Align the brackets so that they line up with the bolt holes for the tie-down hooks, then thread in the factory bolts and tighten.

Lay the folded cover across your truck bed, behind the cab, and then secure the front panel to the mounting rails using the built-in Jaw-Grip clamps. These clamps come pre-installed in the front bow of the tonneau and attach directly to the rails. The Jaw-Grip clamp limits the extent to which you can turn the T-handle to help prevent over-tightening and damage to the rails.

Once you've attached the front panel to your truck, fold the rest of the cover out and secure the rear panel using the built-in EZ-Lock clamps. Just pop the clamps out of the rear panel's bow so that they hang down near the mounting rails on your truck. Then pull on each clamp individually, maneuver the clamp so that it hooks under the bottom edge of the rail, and release the clamp. The EZ-Lock clamp has a spring-action handle that is easy to use and automatically locks the cover to the truck when you release it. To release the clamps, just tug on each one and detach it from the rail.

94590 Extang Trifecta 2.0 Signature Series Soft, Folding Truck Bed Cover

Replaces 46590

Installation Details 

Alternate Instructions 

This Product Fits The Following Vehicles

• 2017 - 2024 Honda Ridgeline