Replacement Cable and Plug Assembly w/ Dual Ground for Meyer and Diamond Snow Plows

Video Transcript for Review of SAM Snow Plow Parts - Snow Plow Replacement Cable - 3371306117

Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the replacement cable and plug assembly with dual ground for your Meyer snowplow. So you can see our plug end here. Then all of our wires are going to have ring terminals at the end and they already have the heat shrink on there to help protect those connections. Make sure no moisture gets in, causes any issues there.Do want to give you a few measurements to make sure that this is going to work for your application.

So our first measurement will be our positive wire. This red wire here, from the end of our ring terminal out to the end of our plug, we're right about 14 inches. Then the first ground wire that's coming out of our plug, again from the end of our ring terminal to the end of the plug there, we're right about 10-1/2 inches. And then our last ground wire, again from the end of our ring terminal out, we're looking at about 15-1/4 of an inch here.So should do a good job for you, if you needing a replacement cable, this should do a good job. As long as you have all those connections.

This will be the cord that you'll need. That's going to complete our look at the replacement cable and plug assembly with dual ground for your Meyer snowplow.