Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Silver - Qty 2
(61 reviews)
Price: $688.80
In Stock
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Silver - Qty 2
Item # Y22EB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (61)
- Q & A (0)
- Videos (49)
- Photos
Yakima Roof Rack - Y22EB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Silver
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Silver - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Clear anodized alloy finish is corrosion resistant
Yakima Landing Pad 9 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with factory track racks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000229 Landing Pad 9 for Yakima Control Towers
8000429 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Silver
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Silver - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Silver - Qty 2 - Y22EB
Average Customer Rating: 4.9 out of 5 stars (61 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Hurtlocker08/12/2023
Strong, Solid Bars, Super Light, and really easy to install!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Jeff07/18/2013
I have used Yakima products for decades. This was a slightly different application for me however with the existing roof mounts on the Honda Element. The landing pads work well, but I just don't trust the 2 small bolts and the plastic to metal butted connection. I would feel better at 70mph with a more 'fitted' attachment. The finished mount feels good. Time will tell. Otherwise an easy installation and a very good looking one. I like the quick detach towers. The full rack on an Element is noisy, nice not to have to hear it without a boat on.
Etrailer was a very easy to work with and I will use the company again.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Kevin M.08/29/2020
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
by: Steve K.04/23/2019
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
by: Troy01/22/2022
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
by: Richard 04/06/2023
Happy with the purchase. Crossbars shipped and received quickly.
by: Gwyn04/22/2015
Yakima roof rack was very easy to install and looks great too!
by: Sara03/19/2019
Yakima is always great, the bars are just right for my kayaks and look great too.
by: John 03/14/2023
Fast delivery. The kit was complete with all the parts I needed.
by: larry07/21/2017
Honda Element
installed on Honda Element, perfect fit. Yack Racks Rock.
by: Brian10/29/2022
Great product, well built and easy to i nstall.
by: Mike 05/20/2020
Great product... love that fact that I can take the bars on and off without having to disassemble the system. Very convenient when not its not being used.
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
by: Dan H06/17/2021
Courtney was excellent. Helped with all my difficulties. Very professional and knowledgeable. She is an outstanding employee and should be commended.
by: William02/28/2024
by: Alice K03/23/2011
Product is great, but etrailer.com is excellent! Great service; fast shipping; top notch communication. Very pleased.
by: Scott01/31/2013
Very easy install looks great. Took about thirty minutes to install!
by: Brett 02/10/2024
25
649
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Roof Rack for Thule Canyon XT Roof Cargo Basket on 2020 Subaru AscentYour 2020 Subaru Ascent will require a roof rack to carry any cargo basket, including the Thule Canyon XT Roof Cargo Basket # TH859XT. Assuming you have raised side rails that run front to back on your Ascent, here is the roof rack that will work with your Subaru: - Yakima JetStream Crossbars # Y00429 (Silver) or # Y00426 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR As for the paddleboards, there isn't anything designed to carry them in a cargo basket so you can use whatever...
view full answer... - Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
view full answer... - Yakima Roof Rack for 2018 Honda Odyssey that Can Fit Thule Hullaport XTThe Yakima HD bar is too thick for the Thule Hullaport XT part # TH849000 to attach to so for your 2018 Honda Odyssey you'd be better off with the JetStream roof rack part numbers # Y00429 and # Y33TR.
view full answer... - Roof Rack Recommendation for 2021 Toyota Highlander with Naked RoofHey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
view full answer... - Does Thule Force XT XL Rooftop Cargo Box Fit Yakima Roof Rack on 2023 Acura MDXYes, the Thule Force XT XL # TH6358B will fit very easily on the Yakima roof rack for your 2023 Acura MDX. There won't be any issues with the fit of your cargo box on this rack it will fit perfectly so you can continue to use it. The only thing you need to do is pick the right Yakima rack for your '23 MDX, depending on if it has a bare roof or flush-mounted rails. Bare Roof - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - BaseLine Towers # Y28TR - BaseClip Fit Kit # Y06163...
view full answer... - Parts Needed To Install 60" JetStream Bars On A 2021 Toyota Tacoma Double Cab With Factory RailsWe can definitely help set you up. To install a pair of 60" Yakima JetStream bars on your 2021 Toyota Tacoma Double Cab with factory rails, all you will need is a set of TimberLine Towers # Y33TR, and your crossbars. We have the 60" JetStream bars available in silver # Y00429 or in black # Y00426.
view full answer... - Yakima Crossbar Length For 2022 Lexus GX 460 & HullavatorI checked with Yakima regarding the crossbar length, and they do say 50, which is odd for your 49 inch rails. With that distance between your rails, don't use the 50 inch bars, use the 60 inch long JetStream bars, either Silver # Y00429 or Black # Y00426. The rest of the parts for the Yakima rack on your 2022 Lexus GX 460 remain the same; Towers # Y53TR, Landing Pad 30 # Y25ZR and Lock Cores # Y07204.
view full answer... - Roof Rack For A 2017 VW Golf Sportwagen To Use With The Thule HullavatorWe can definitely set you up with a roof rack for your 2017 Volkswagen Golf Sportwagen that is compatible with the Thule Hullavator # TH898. The Hullavator requires the crossbar to overhang past the tower by 4" to 8", so it will be best to use a solid aero bar setup with a slightly longer crossbar. For that I recommend the Yakima Jetstream roof rack. This will consist of the following parts: Yakima TimberLine Towers for Yakima Crossbars # Y33TR Yakima JetStream Crossbars - Aluminum - Silver...
view full answer... - Yakima Jetstream Roof Rack that Fits 2024 Ford Escape with Naked RoofYes, we do have a Yakima Jetstream roof rack that fits your 2024 Ford Escape with the part numbers # Y00429, # Y28TR, # Y06137, # Y06152. We recently installed all of the roof racks we offer and everyone agreed the Jetstream was the nicest and easiest to install.
view full answer... - Roof Rack For 2015 Toyota Highlander For Naked RoofThe video you referenced is for a 2015 Toyota Highlander with flush mounted rails; I checked directly with Thule and they do not have a roof rack fit for a naked roof on a '15 Highlander, just one with those flush mounted rails. So if you want a rack, you'd need a new set up. For that I would go with Yakima, as it is the that is the most similar in quality to a Thule rack. The parts that make up a Yakima roof rack for your 2015 Toyota Highlander are the following: - Yakima JetStream...
view full answer... - How to Determine Correct Roof Rack For 2024 Kia TellurideI'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
view full answer...
- What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Best Roof Rack For 2024 Kia EV9 With Raised Side RailsThe best roof rack for your 2024 Kia EV9 with raised side rails is from Yakima, and consists of the following part numbers: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - TimberLine Towers for Yakima Crossbars # Y33TR I really like the Yakima brand due to how quiet the bars are; they have what are called "WindRidges" on top that control the flow of the air both over and under the bar, which minimizes both vibration of the bar and wind noise. It is also highly durable,...
view full answer... - Roof Cross Bars That Fit A 2015 Chevrolet Silverado 1500 With An A.R.E MX Bed CapTo install a roof rack on your A.R.E MX Bed Cap on your 2015 Chevrolet Silverado 1500, you're going to need to install a set of tracks like: -Yakima Tracks for Roof Racks # Y01126 for 42" long tracks, -Yakima Tracks for Roof Racks # Y01127 for 54" long tracks, or, -Yakima Tracks for Roof Racks # Y01135 for 60" long tracks. From here you'll need an actual set of crossbars like the: -Yakima JetStream Crossbars # Y00429, with the BaseLine Towers for Yakima Crossbars # Y28TR, and the Landing...
view full answer... - Whats The Longest Roof Rack Available For 2023 Toyota Highlander For Thule HullavatorThe longest crossbar that'll work with the flush roof rails on your new 2023 Toyota Highlander Hybrid Platinum is 50" and is the Yakima roof rack system which uses the following parts: Crossbars # Y00429 Towers # Y53TR Landing Pad # Y66VR This will be long enough to use both but as each one weighs over 40lbs, plus the roof rack weighs about 15lbs you'd be overloading your roof with two kayaks and two hullavators as your roof only has a 165lb capacity per Toyota.
view full answer... - Rooftop Cargo Carrier Recommendation for 2020 Toyota Highlander with Panoramic RoofFor a great option for your 2020 Toyota Highlander with panoramic bare roof, I recommend the Thule Force XT XXL # TH6359B. This box has the largest internal dimensions out of all of our cargo boxes. It also comes with a dual-opening lid that can be accessed from either side of your vehicle. I confirmed that your trunk can fully open with this box mounted on your roof. If you already have crossbars, I recommend measuring your bars to make sure they do not exceed 3-1/2" wide x 1-11/16"...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Recommended Roof Rack for a 2024 Acura MDX w/ No Roof Rails Yes, we do! To add a roof rack to your 2024 Acura MDX with a naked roof you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06163 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06178 This aero bar roof rack system has a 165 lbs capacity....
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Will Rhino-Rack Crossbars Fit On Yakima BaseLine Towers? The top channel on most crossbars like the Rhino-Rack and Yakima are similar but you should never mix and match towers and crossbars between different manufacturers. Their components are designed to work specifically with each other and your Yakima towers may not work properly with the Rhino-Rack crossbars. Instead you will want to stay with the Yakima crossbars from the list below to ensure they fit together properly and you have a manufacturer who will stand behind the warranty for the...
view full answer... - Recommended Roof Rack For A 2023 Toyota RAV4 With A Thule Hullavator Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator # TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones that are longer than your typical length without worrying if the mounting feet will be able to connect. You'll want the following components: Yakima JetStream Crossbars - Black - 60" Long # Y00426 or silver # Y00429 SkyLine Towers for Yakima Crossbars...
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Yakima Roof Rack that Fits 2019 Honda Passport with Raised RailsSince your 2019 Honda Passport has raised rails the roof rack feet that fit it are the ones that wrap around the bars whereas the flush bar roof styles are the ones that have options that attach directly to it. So for a Yakima there is the Jetstream part number # Y00429 and # Y33TR which is an aero shaped bar setup that wraps around your raised rails. This is a very solid setup that will work great and is no less reliable than any other option.
view full answer... - Recommended Roof Rack for a 2024 Nissan Pathfinder w/ Raised Rails I would be happy to! To add a Yakima roof rack to your 2024 Nissan Pathfinder you will need the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of Yakima's products is you can...
view full answer... - Recommended Roof Rack for Hullavator and Kayak Carrier on 2019 Honda PilotThank you for all of the information! While you are able to use the Hullavator # TH898 with your setup as far as weight goes, this kayak carrier does require the crossbars to stick out 4" - 8" out past the roof rack feet. Since the Thule SquareBars have a limited amount of space under them for the feet you can only use the 53" Bars # TH712400 but this wouldn't give you the required spacing for the Hullavator. I recommend using the Yakima 60" JetStream Crossbar # Y00426 instead with the...
view full answer... - How To Carry Two Kayaks On a 2019 Subaru OutbackIn order to carry two kayaks on a 2019 Subaru Outback you are first going to need to start with a roof rack for which I recommend using the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y00241. The Yakima JetStream Crossbar System has aero shaped crossbars for reduced wind noise, integrated channels for accessories, and a custom fit set of landing pads that install in fixed mounting points on the roof which makes for a really nice overall look. Then, in order...
view full answer... - 60 inch Crossbar Roof Rack Recommendation for 2020 Honda CR-VIf you went with a Yakima corebar setup you could install a 60 inch aero bar rack. So for that you'd want the SkyLine Towers # Y53TR, Landing Pad 19 # Y00245, and 60 inch bars # Y00422 and you'd be set! This attaches directly to your flush roof rails. I attached an install video for a similar corebar roof rack on a 2016 Honda CR-V for you to check out as well.
view full answer... - Best Roof Rack for 2020 Mazda CX-30 with Naked RoofThe best roof rack for your 2020 Mazda CX-30 with a naked roof is from Yakima and is made up of the following parts: - Yakima JetStream Crossbars # Y00425 (Black) - SkyLineTowers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 - Same Key System Lock Cores (Optional) # Y07204 This roof rack system is the best for your 2020 Mazda CX-30 because it gives you a rare combination of being very quiet, simple to use, and durable while also looking stellar...
view full answer... - Roof Rack for 2018 Jeep Wrangler JL that Can Allow Thule Hullavator Carrier to InstallThe Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00226 that you referenced is a confirmed fit for your 2018 Jeep Wrangler JL and it by itself easily has capacity and bar length to carry two of the assisted Thule Hullavator roof racks part # TH898. You'll need to check to make sure the hardtop of your Jeep has the capacity for your two kayaks and the weight of each of the Hullavators as well which weighs right at 40 lbs.
view full answer... - Parts Needed to Add Yakima LockNLoad to Thule TracksYes, to add the Yakima LockNLoad Platform Roof Tray # Y05048 to Thule tracks you'll need to order three of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221, the SkyLine Towers # Y53TR, the SkyLine Towers # Y72TR, and the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-3.
view full answer... - Can I Install A Rooftop Tent On My 2021 Honda CR-V With Flush Rails?To make sure that you can get the spread you need to have to mount your rooftop tent you'll need to take some measurements. On your flush rails there will be fixed mounting points on the top of the rails. When you have flush rails you won't be able to adjust the spread at all. That is your maximum mounting width. If the fixed mounting points match up to your rooftop tent, you can get a roof rack for your 2021 Honda CR-V. I Recommend getting a hefty system like the Yakima HD Bars # Y01156...
view full answer... - 2021 Jeep Grand Cherokee Trailhawk Platform Style Roof RackThere may be slight differences between the 2020 and 2021 Grand Cherokee, but not much. If you're wanting to get a platform on your 2021 Jeep Grand Cherokee I do have one that is confirmed to fit. All You need is to get the Yakima LockNLoad Platform # Y05044, SkyLine Towers # Y53TR, SL Adapter # Y05042-2 and these Landing Pad 18 # Y00244. This is just like the rhino rack platform. It will install similar to the rack that I put on this 2019 Cherokee so check that out!
view full answer... - What Do I Need To Install The Yakima RocketBox 14 On My 2015 Toyota HighlanderFirst let's get you a roof rack system! I also like the Yakima Jetstream Bars # Y00425. If you have flush rails on your 2015 Toyota Highlander then you'll need the SkyLine Towers # Y53TR and the Landing Pad 16 # Y00242. If you have a naked roof, still grab the Jetstream bars along with the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06130. You won't have any issues with opening the rear hatch. If you take a look at the video attached, the RocketBox has plenty of room on a 2012...
view full answer... - Which Yakima Towers Can Install in Retrax XR Tonneau RailsYakima's Skyline towers part # Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part # Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers though.
view full answer... - Roof Rack that Fits 2019 Cadillac XT4 with Raised Side RailsYakima has a roof rack fit for your 2019 Cadillac XT4 with side rails with the part numbers # Y00245, # Y53TR, and # Y00425 which will give you the very aerodynamic JetStream style of crossbar that will minimize wind noise! The bars also have top channels which makes attaching accessories easy as well.
view full answer...
- Carrier 2 Canoes on a 2015 Subaru Outback Using Aftermarket Roof Rack CrossbarsIf your 2015 Subaru Outback also have the factory raised side rails (which it should) then yes, you can add alternate crossbars using SkyLine towers # Y53TR, Landing Pad # Y00241, round bar adapters # Y03536, and crossbars # Y00409. These are 58 inch long crossbars which will provide enough space for 2 canoes side by side. Please note the roof weight carrying capacity of the vehicle is 150 pounds. Keep that in mind prior to loading. For a canoe carrier I recommend using 2 of # TH819 which...
view full answer... - Can the Yakima SkyRise Tent Be Used on a 2011 Honda CR-VAccording to the owner's manual for your 2011 Honda CR-V, the roof has a weight capacity of 165 lbs. Therefore, you can use a Yakima SkyRise Tent on your CR-V without any issues as it meets the minimum weight capacity requirement of 165 lbs. The Yakima SkyRise does have a 60 lb weight capacity but since the ladder will support much of the weight, the roof rack/vehicle only needs to be rated for 165 bs. In order to use the Yakima SkyRise on your CR-V you will also need an aftermarket roof...
view full answer... - Recommended Roof Rack And Canoe Carrier For 2015 Subaru Outback WagonIf you have a roof rack system on your Outback and is not the Sport model, the roof rack I recommend is the Yakima CoreBar roof rack. You would need to remove your roof rack and use the fixed mounting points on your roof. The 50-inch aero-style crossbars design helps reduce wind noise and drag and helps keep the roof rack quieter. For this roof rack you will need part # Y00421, part # Y53TR, and part # Y00241. For longer crossbars, you can take a look at part # Y00422 for 60-inch, and...
view full answer... - Best Roof Rack for a 2015 Mazda 3 5-door with Fixed Mounting PointsFor the 2015 Mazda 3, you'll only have access to either Yakima or Rhino Rack roof bars. Both are great companies and there's a few differences that are important to note about the two companies. Rhino Rack doesn't produce as many accessories, but is a smaller than average bar and fits more mounting hardware in both its C-Channel and around the bar. Additionally, its locking system is two part, one for the foot pack and one for the c-channel accessories as a separate part. Finally, Rhino...
view full answer... - Which Yakima Towers Are the Landing Pad 23 Compatible WithThe Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4 # Y98FR are only compatible with Yakima SkyLine Towers for Yakima Crossbars # Y53TR and the older Yakima Control Towers like the Replacement Yakima Control Tower for Factory-installed Tracks (QTY 1) # Y8890027. If you've got a different model tower than either one of those, you'll need to replace the towers in order to use the # Y98FR landing pads on your 2019 Toyota RAV4.
view full answer... - Roof Rack with 60-Inch Crossbars for 2017 Chevy Suburban with Flush Roof Side RailsThe Rola Sport REX Series Roof Rack 59685 is a confirmed fit for your 2017 Chevrolet Suburban but this rack comes as a complete kit and no other lengths of bars are available. If you prefer a longer roof rack crossbar in the 60-inch size we do have options that are displayed on the linked page. Like the Rola rack, all of these Thule and Yakima options feature aero-style crossbars that are quieter than other bar types. The most cost-effective choice is the Yakima Core Bar/Skyline rack...
view full answer... - How to Order Yakima HardTop Roof Rack without Roof TracksYou'd need two sets of the Landing Pad 1 # Y00221, the 60 inch CoreBars # Y00422, and SkyLine Towers # Y53TR and you'd have everything the discontinued Y01618 has without the tracks.
view full answer... - How to Carry Cargo on 2014 Mercedes Benz E-350 Coupe with 2 DoorsIf you are looking to carry cargo or bike racks on a 2014 Mercedes-Benz E-350 the best option is going to be to install a roof rack because the only hitches available are for a '14 E-350 are for a sedan or wagon. The good news is that you can install a roof rack whether or not you have the Panorama Roof as it will attach to fixed mounting points on your Mercedes. I highly recommend going with a roof rack option from Yakima because it will give your 2014 Mercedes E-350 coupe a roof rack...
view full answer... - Lear Camper Shell Compatibility With Yakima Roof RackI do have a solution for you. Your Yakima roof rack will consist of the following items: Yakima 42" Tracks for Roof Racks, part # Y01126 Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2, part # Y00221, Qty of 2 This is a roof rack with elliptical shaped bars. These bars help with with wind...
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - How To Carry 2 Kayak And A SUP On A 2021 Toyota RAV4I can get that rack setup for you. I recommend a Yakima offering. It will consist of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2, part # Y00425, SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR, Landing Pad 23 for Yakima SkyLine and Control Towers - Qty 4, part # Y98FR, Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This rack has t-channel, so it can work with all channel...
view full answer... - What is the Best Roof Rack for a 2024 Subaru Outback Wagon w/out the Wilderness Rails?The best roof rack for a 2024 Subaru Outback Wagon without the Wilderness rails is the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points - Qty 4 item # Y53TR Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4 item # Y46VR
view full answer... - Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
view full answer... - Would Rhino Rack Roof Basket part # RMCB02 fit a 2003 Honda ElementThe Rhino Rack cargo basket part # RMCB02 can fit a wide range of crossbar dimensions. It can fit crossbars that are up to 3-1/2" wide x 1-1/4" tall and spaced between 25-1/2" - 43". Most likely this would fit the factory bars of your 2003 Honda Element but Rhino Rack does not have your vehicle in their fit guide at this time so you would need to measure the dimensions and spread of your rack to see if this would fit. Now if you need a set of crossbars we can help with that, but we don't...
view full answer... - Recommended Roof Rack System for 2006 Honda Element Used For Roof Top TentIt looks like your 2006 Honda Element has fixed mounting points, so you'll need to make sure that the center of each mounting point is at least 28" apart to use a Roofnest Sparrow tent. For a roof rack I recommend using the Yakima Roof Rack for 2006 Honda Element that uses parts # Y00426, # Y53TR and # Y00229, which will give you a durable roof rack capable of carrying the Sparrow XL. This system uses aerodynamic crossbars that will limit wind noise and you can add locks with part # Y07204...
view full answer... - Recommended Roof Rack For 2006 Honda ElementI reached out to my contact at Yakima and the Q towers will not work on either of the vehicles mentioned. For the 2006 Honda Element, you will need the following: Round 58" CrossBars for Yakima Roof Rack System # Y00409 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points # Y53TR RoundBar SL Adapter # Y03536 Landing Pad 9 # Y00229 We don't have any fit for the 2008 Jeep Liberty with flat rails from any of our manufacturers. There isn't a safe connection point on that vehicle.
view full answer... - Yakima Roof Rack With 58 Inch Crossbars For 2010 Acura MDXFor your 2010 Acura MDX, there is a Thule 58 inch cross-bar option. If you have the factory installed tracks, you can use the Round 58" CrossBars # Y00409, SkyLine Towers # Y53TR, RoundBar SL Adapter # Y03536 and Landing Pad 9 for Yakima Control Towers # Y00229. If you have a naked roof (no existing rails) there is a Yakima Roof Rack with 58 Inch bars # Y00409, BaseLine Towers # Y28TR, Fit Kit # Y06150 and # Y06151 Either roof rack will give you a very nice and clean roof rack with a...
view full answer... - Recommended Trailer Hitch, Wiring and Roof Rack for 2007 Honda Element SCI can get you set up with all of that for your 2007 Honda Element SC. For a trailer hitch you need the Draw-Tite # 75659; the wiring option I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118465. As for a roof rack, the best choice is from Yakima and consists of aerodynamic CoreBar Crossbars # Y00422, SkyLine Towers # Y53TR and Landing Pads # Y00229. This will give your Element a sleek roof rack that attaches to fixed mounting points on your roof;...
view full answer... - Parts Needed To Install Yakima Round Bars On A Honda ElementWe do carry the additional parts needed to mount Yakima Round bars on the top of your Honda Element. Fortunately both the 2007 and 2010 models use the same parts. You will need the following parts; Skyline Towers # Y53TR Roundbar Adapter # Y03536 Landing pad # Y00229 (you will need to order qty 2 of these for 2 crossbars) Please note that with the fixed mounting points on your Honda Element, you are limited to only 2 crossbars on each vehicle. I am not sure but it sounds like you are...
view full answer... - What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
view full answer...
- Roof Rack Recommendation for 2007 Honda Element SCYakima is our only manufacturer that offers roof rack fits for the SC models of the 2007 Honda Element like what you mentioned. For that the Corebar rack part numbers # Y00422, # Y53TR, and # Y00229 would be a really great option. It's an aero bar design which means minimal wind noise and affected fuel mileage.
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Roof Rack for 2007 Honda Element to Allow Use of Thule Hullavator Pro Kayak Carrier TH898Thank you for the photo of your 2007 Honda Element for which you want a roof rack that will allow use of the Thule Hullavator Pro Kayak Carrier # TH898. The Hullavator Pro requires that the host roof rack have bar spacing of at least 24-inches, a minimum of 28.5-inches of available bar space, and it also requires that the bars extend outside of the rack feet 4 to 8-inches on both sides. This ensures the lowered carrier will not contact the vehicle. Please refer to the linked diagram that...
view full answer...
- Roof Rack Recommendation for a 2007 Honda Element SCThule does not have a fit for the SC models of the 2007 Honda Element but Yakima does. To add a Yakima roof rack you will need the following parts: CoreBar crossbars # Y00422 SkyLine towers # Y53TR Landing Pad 9 # Y00229
view full answer... - Replacement Yakima Landing Pad for 2004 Honda ElementThank you for all of the information and the pictures! According to Yakima the only landing pad that has ever been used for a 2004 Honda Element is the Landing Pad 9 # Y00229 which sits on top of those black trim sections on your roof. I reached out to my contact at Yakima who also confirmed this. I'm thinking that whoever installed this roof rack kit used a custom option that you would drill through the roof to install because the feet locations in your pictures sit well in front of where...
view full answer...
- How To Carry Two Sit On Top Kayaks On a 2005 Honda ElementThe best option for you to haul both the Feelfree Corona and the Feelfree Moken 12.5 on your 2005 Honda Element is with an upgraded roof rack that will allow you to retain the full weight capacity of your vehicle's roof, 165 lbs. For this, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00422, part # Y53TR, and part # Y00229. The Yakima CoreBar Crossbar System is an excellent option for you because it has aero crossbars for decrease wind noise, overhang past...
view full answer... - Yakima Landing Pad 9 For 2008 Honda Element SC Roof RackYes, we do have the Yakima Landing Pad 9 for your 2008 Honda Element SC, what you need are the following: - Landing Pad 9 for Yakima SkyLine and Control Towers # Y00229 The # Y00229 come in a pack of two landing pads, so to get four in total you will need to order a quantity of two.
view full answer... - Would Rhino Rack Roof Basket part # RMCB02 fit a 2003 Honda ElementThe Rhino Rack cargo basket part # RMCB02 can fit a wide range of crossbar dimensions. It can fit crossbars that are up to 3-1/2" wide x 1-1/4" tall and spaced between 25-1/2" - 43". Most likely this would fit the factory bars of your 2003 Honda Element but Rhino Rack does not have your vehicle in their fit guide at this time so you would need to measure the dimensions and spread of your rack to see if this would fit. Now if you need a set of crossbars we can help with that, but we don't...
view full answer... - Recommended Roof Rack System for 2006 Honda Element Used For Roof Top TentIt looks like your 2006 Honda Element has fixed mounting points, so you'll need to make sure that the center of each mounting point is at least 28" apart to use a Roofnest Sparrow tent. For a roof rack I recommend using the Yakima Roof Rack for 2006 Honda Element that uses parts # Y00426, # Y53TR and # Y00229, which will give you a durable roof rack capable of carrying the Sparrow XL. This system uses aerodynamic crossbars that will limit wind noise and you can add locks with part # Y07204...
view full answer... - Recommended Roof Rack For 2006 Honda ElementI reached out to my contact at Yakima and the Q towers will not work on either of the vehicles mentioned. For the 2006 Honda Element, you will need the following: Round 58" CrossBars for Yakima Roof Rack System # Y00409 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points # Y53TR RoundBar SL Adapter # Y03536 Landing Pad 9 # Y00229 We don't have any fit for the 2008 Jeep Liberty with flat rails from any of our manufacturers. There isn't a safe connection point on that vehicle.
view full answer... - Yakima Roof Rack With 58 Inch Crossbars For 2010 Acura MDXFor your 2010 Acura MDX, there is a Thule 58 inch cross-bar option. If you have the factory installed tracks, you can use the Round 58" CrossBars # Y00409, SkyLine Towers # Y53TR, RoundBar SL Adapter # Y03536 and Landing Pad 9 for Yakima Control Towers # Y00229. If you have a naked roof (no existing rails) there is a Yakima Roof Rack with 58 Inch bars # Y00409, BaseLine Towers # Y28TR, Fit Kit # Y06150 and # Y06151 Either roof rack will give you a very nice and clean roof rack with a...
view full answer... - Recommended Trailer Hitch, Wiring and Roof Rack for 2007 Honda Element SCI can get you set up with all of that for your 2007 Honda Element SC. For a trailer hitch you need the Draw-Tite # 75659; the wiring option I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118465. As for a roof rack, the best choice is from Yakima and consists of aerodynamic CoreBar Crossbars # Y00422, SkyLine Towers # Y53TR and Landing Pads # Y00229. This will give your Element a sleek roof rack that attaches to fixed mounting points on your roof;...
view full answer... - Parts Needed To Install Yakima Round Bars On A Honda ElementWe do carry the additional parts needed to mount Yakima Round bars on the top of your Honda Element. Fortunately both the 2007 and 2010 models use the same parts. You will need the following parts; Skyline Towers # Y53TR Roundbar Adapter # Y03536 Landing pad # Y00229 (you will need to order qty 2 of these for 2 crossbars) Please note that with the fixed mounting points on your Honda Element, you are limited to only 2 crossbars on each vehicle. I am not sure but it sounds like you are...
view full answer... - What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
view full answer... - Roof Rack Recommendation for 2007 Honda Element SCYakima is our only manufacturer that offers roof rack fits for the SC models of the 2007 Honda Element like what you mentioned. For that the Corebar rack part numbers # Y00422, # Y53TR, and # Y00229 would be a really great option. It's an aero bar design which means minimal wind noise and affected fuel mileage.
view full answer... - What Roof Rack Do You Recommend for a 2007 Honda Element SC?Absolutely! For a great roof rack system that will fit your SC version of the 2007 Honda Element, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Silver - 60" Long - Qty 2 # Y00429 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR - Landing Pad 9 for Yakima SkyLine and Control Towers - Qty 4 # Y00229 - (Optional for extra security) Yakima Same Key System (SKS) Lock Cores (QTY 2) # Y07202 With the above...
view full answer... - Roof Rack for 2007 Honda Element to Allow Use of Thule Hullavator Pro Kayak Carrier TH898Thank you for the photo of your 2007 Honda Element for which you want a roof rack that will allow use of the Thule Hullavator Pro Kayak Carrier # TH898. The Hullavator Pro requires that the host roof rack have bar spacing of at least 24-inches, a minimum of 28.5-inches of available bar space, and it also requires that the bars extend outside of the rack feet 4 to 8-inches on both sides. This ensures the lowered carrier will not contact the vehicle. Please refer to the linked diagram that...
view full answer... - Roof Rack Recommendation for a 2007 Honda Element SCThule does not have a fit for the SC models of the 2007 Honda Element but Yakima does. To add a Yakima roof rack you will need the following parts: CoreBar crossbars # Y00422 SkyLine towers # Y53TR Landing Pad 9 # Y00229
view full answer... - Replacement Yakima Landing Pad for 2004 Honda ElementThank you for all of the information and the pictures! According to Yakima the only landing pad that has ever been used for a 2004 Honda Element is the Landing Pad 9 # Y00229 which sits on top of those black trim sections on your roof. I reached out to my contact at Yakima who also confirmed this. I'm thinking that whoever installed this roof rack kit used a custom option that you would drill through the roof to install because the feet locations in your pictures sit well in front of where...
view full answer... - How To Carry Two Sit On Top Kayaks On a 2005 Honda ElementThe best option for you to haul both the Feelfree Corona and the Feelfree Moken 12.5 on your 2005 Honda Element is with an upgraded roof rack that will allow you to retain the full weight capacity of your vehicle's roof, 165 lbs. For this, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00422, part # Y53TR, and part # Y00229. The Yakima CoreBar Crossbar System is an excellent option for you because it has aero crossbars for decrease wind noise, overhang past...
view full answer... - Yakima Landing Pad 9 For 2008 Honda Element SC Roof RackYes, we do have the Yakima Landing Pad 9 for your 2008 Honda Element SC, what you need are the following: - Landing Pad 9 for Yakima SkyLine and Control Towers # Y00229 The # Y00229 come in a pack of two landing pads, so to get four in total you will need to order a quantity of two.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.