Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 54" Long:Specs:
Inno Square Load Bars - Black - 54" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Toyota RAV-4, we're gonna be test fitting the Inno aero roof rack system, consisting of part numbers INXB108-115. These are the Inno aero crossbars, 42 inches long and 45 inches long. We'll also be using part number INXS200. These are the flush feet for aero crossbars. And finally we'll be using part number INK646, which is the custom fit kit for the RAV-4.The Inno aero roof rack system is great for carrying a wide variety of accessories and freeing up space inside your RAV-4. This can carry anything from bike racks to cargo baskets to cargo boxes.
The bars have an aerodynamic shape, and that, coupled with a rubber strip at the top, is gonna cut down wind noise and drag while you drive, and it also eliminates the need for a inaudible 00:00:45. While the overall look of the roof rack system has a factory style look to it, it does have a couple hindrances. One is gonna be how much space you'll lose by cutting off this end here. Most roof rack systems have bars that protrude past the feet, and this enables you to carry a lot more accessories up on top. With this, you're a little bit more limited.
Instead of being able to carry, say, one cargo box and a couple bike racks, now you're only limited to one cargo box or two bike racks on their own.All the end caps do come with a lock included, so they are secure to your roof once installed, and with removing that, you can see with that strip, you can push it down and this can be used with T-track accessories. These are very easy to install. They simply clamp on to your existing doorframe to be put into place, and all measurements and tools that you'll need to install them come with a kit. Next I'll give you a couple of quick measurements. From the center of the roof to the bottom of the bars is gonna be about 2 5/8 inches.
From the center to the top is gonna be about 3 1/2 inches. So that's more than enough space in between the roof and the bar to attach any roof rack accessories that wrap around the bars instead of using the T-track accessory portion. Also it's not gonna interfere with our sunroof here. And both bars combined have a carrying capacity of 165 pounds, but you always wanna double check your vehicle's roof to make sure it can maintain those weights.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our front bar already installed on our roof and we'll show you how we got those measurements a little bit later.
We have our rear bar partially assembled on our table here, and our next step is to take our flush foot, put it on the other side, and start installing our fit kit as well. We'll slide up the inner portion of our arm. We've gone ahead and flipped it over. Then we'll take our piece here. That just kinda fits into place like so. We'll push that back to the inside, and then we'll take this tab here on our foot, place it in like so, slide it back out, and just lightly tighten the screw on the inside with our included Allen tool. Before we tighten it down completely, we're gonna measure out from foot to foot to make sure we have the proper space in between them before we tighten it down. So we'll measure it out. You'll find this in your instructions. Make any adjustments as needed. Tighten the rest of the way. May need to loosen up the other side just a bit so we can make some adjustments here.Now if we take our rubber foot tab. This is numbered to make sure it's going in the proper location. You'll find it in your instructions as well. And that just pushes into place. Then we'll take our clamp and we'll undo the screw on the end, put that in place, and just loosen tighten the screw for now. Now we're ready to place this on the roof of our vehicle.As stated before, we we're gonna show you how we got our front bar into position here. What we did is we set it into place, measured from the center door jam back to the center here. With our rear bar, we're gonna measure from the center door jam to the center of that bar as well. So we'll set our bar into place gently, just to avoid any damage, and then we'll take that measurement from this point to this end. This will take our included tightening tool, and we'll get our clamps just snug up against the doorframe here, and we'll do this on both sides. Once that's done, we'll go back and forth until they're completely tightened down. You're gonna hear audible clicks when you do this from our tool here, and that's gonna let you know that it's torqued to its proper specification. Final step is we'll put our end caps in place, lock those down, and then we're ready to load up our gear and hit the road.And there you have it for the Inno aero roof rack system on our 2018 Toyota RAV-4.
Average Customer Rating: 4.6 out of 5 stars (355 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Work exactly as described and after a year, still in great condition.
Easy to install and very sturdy. Might be more expensive than others on Amazon but trust me spend the money on these.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Worked great! Held up a roof top tent all summer. No bending or damage from use.
Easy to install and have worked great so far!
Super easy to install and remove. Lock feature is great
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
My order just arrived this afternoon and I have not yet looked at everything by I am upset over the rails falling out of the box as it is damaged. I will be looking to make sure all parts are contained but so far not thrilled with the condition of the materials as delivered.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
Fantastic customer service.
Andrea is great.
Thanks for your help!
Very noisy, had to take them off when not in use.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
Great roof rack. Easy to install and du rable!
Worked well for my 2006 Toyota Prius
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.