To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your Nissan Frontier. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Specs:
The quiet and aerodynamic Yakima JetStream crossbars let you build a custom roof rack for your vehicle. The crossbars require 4 Yakima BaseLine, RidgeLine, SkyLine, or TimberLine towers and a custom fit kit (sold separately) to mount the rack to your roof. Each bar extends past the towers to maximize space for mounting carriers and accessories. SmartFill strips push down for easy loading in the T-slots so there's no need to trim them. The bars are constructed of aluminum so they're durable and won't rust.
Aerodynamic JetFlow Design
The JetStream's asymmetrical JetFlow shape and built-in WindRidge helps to control air flow over and under the bar. This dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack. The aero-style bar also reduces drag to help maintain fuel efficiency.
Strong, Durable Construction
The JetStream crossbars are made of anodized aluminum with internal JetTruss extrusions. These extrusions strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum and have a black powder coat finish, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Each JetStream crossbar has a bottom channel that allows you to mount it to any of the Yakima StreamLine towers - BaseLine, RidgeLine, SkyLine, or TimberLine. The rubber strip in the channel can be cut down to the exact size needed for installation and then re-installed in the channel. This helps keep dirt out of the bar and reduces wind noise.
Etched measurements along the bottom channel help you center the bar on your roof. Simply use the ruler on each end of the bar to ensure the towers are spaced properly in the channel.
Once you have the correct measurements, install the brackets in the bottom channel, set the bar on top of your towers, and tighten it in place with the torque tool (included with your towers).
Channel-Mounted and Clamp-On Accessories
JetStream crossbars have built-in top channels that allow you to carry channel-mounted accessories on your roof. Simply push down on the rubber SmartFill strips and slide your gear into the channel - no need to remove or cut the strip.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Maximum Cargo Carrying Capacity
The JetStream is a full-length crossbar that extends past your Yakima towers. The increased length gives you more space to mount accessories and carriers to your roof rack.
Average Customer Rating: 4.9 out of 5 stars (572 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Yakima Baseline with Yakima CBX 18 Cargo Box fitted on my 2012 Toyota Corolla S Sedan 2012.
Instructions were clear and roof rack was easily installed.
The 50” jetstream cross bars were perfect for my 2019 Ford Ranger with my ARE cap. They are paired with the Yakima Skyline towers and appropriate landing pads (protip: call etrailer when you order to ensure you have the correct setup;)
These cross bars are SILENT on my cap. Zero wind noise. My daughter and I installed them on a Friday (I do recommend watching etrailer’s installation video in addition to the paper instructions) and left for a 700 mile weekend road trip the next day to pick up a kayak, paddle with friends downstate then drop her off at summer camp.
Even with empty Yakima Jaylows on top, no wind noise. Even with a boat in the Jaylows, no wind noise.
These are the sweetest rack’s I’ve had. With the Skyline towers and landing pads, they are also easy to take off and put on. Click click done.
They look good, too;)
etrailer customer service for the win, too. When I originally ordered, I did not order all the items I needed for installation. When I realized this, I called and they got me squared away.
Great product - very good quality. I liked the fact that I could keep the risers mounted on my car, but could remove the cross bars. It took me awhile to install - but I'm not very mechanically inclined.
Good condition quality. Good and detailed instructions but aittle tedious install.
I have a Buick Envision and it seemed as if it would be difficult to get the correct rack, but it turned out to be easy. I entered my vehicle info and was directed to the Yakima Skyline with flush rails. It was easy to install and they look great. I will be able to take my canoe out with no problem! Joe
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
Phillip R.
9/30/2022
A year in, still perfectly happy with this system.
I’m using these towers in conjunction with the JetStream cross bars. Assembly and setup was easy, all the tools you need are provided, except perhaps a tape measure for mounting. Looks and feels solid and well made. This is my second set of Yakima towers and cross bars. I plan to use this setup for an old roof top hard shell case and for my mountain bike to get to the trail head.
After completing the installation I took it out for a spin to check for wind noise at highway speeds. No discernible noise, I’m very happy about that as I really don’t want to remove these when not needed. For reference these are mounted on a 2019 Subaru Forester Touring with factory raised rails. Plenty of clearance for attaching equipment and gear.
Side note: the gentleman that assisted me on the phone while ordering was very pleasant and helpful, got me the right products very quickly as I was in a time crunch. Two thumbs up!
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Richard
7/1/2018
no change
You guys provide great products and excellent customer service.
Thanks
Easy to install. No noticeable noise from the bars. Seem to be very sturdy.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The Yakima crossbars, along with the RidgeLine Towers and the the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
Yakima Jetstream cross bars.. nice bars worth the extra money. can be adjusted for pitch/angle of attack to "tune" the air profile.. mine have absolutely no high speed wind noise or whistling.. rubber weather strip underneath further smoothes the bar profile.. quietest roof rack system I have ever owned..
I purchased the Baseline towers with base clip fit kit and jetstream crossbars. They were great quality and the instruction materials included for assembly and installation were great. I was able to assemble and install on my Lexus CT 200 in about an hour. It looks nice too!
The crossbars are light and very strong. They fit perfectly and installed easily.
Excellent service!! I needed new crossbars as I purchased a new vehicle and l needed them in a hurry and I did receive them thank you.
As said in my other review these etrailer guys helped me where the Yakima customer service and sales people couldn't.
Great fit, fairly easy instructions, I prefer printed instructions along with the pictures. All in all I recommend this product .
Awesome experience and product! It shipped fast and was easy to install using the directions and a recommended video. Plus, it looks super hot attached to my white Honda Accord Coupe 2016. (I leave it on all year round.) Love it and etrailer!!
Arrived quickly; easy instal!
Had the parts I needed when I couldn’t find them anywhere else and they were delivered on time.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joseph R.
10/12/2022
It is a great rack for skis and canoes