To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 50" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Jeep Grand Cherokee, we're going to be test fitting the Inno Square Crossbar Roof Rack System, consisting of part number INB127. These are the square crossbars, 50" long. We'll also be using part number INTR, which are the Inno feet, for the Square Crossbars, particularly for track systems, or flush side rails. Finally, part number INTR132. This is the Custom Fit Kit for the Jeep Grand Cherokee.The Inno Square Bar Roof Rack system is great for carrying a wide variety of accessories on your roof, while freeing up space inside your vehicle. This can carry anything from bike racks, to cargo baskets, to cargo boxes.
The square bars are strong and durable, however, they will make some noise while you drive. Inno does offer several fairings that you put in front of these to cut down the wind noise and drag, which you can find on etrailer.com. The endcaps are lockable, to secure your roof rack system to your roof as well. They also help protect your actual connection plates here underneath from all the weather and elements, while you drive.Next I'd like to give you a couple of quick measurements. From the center of the roof, to the bottom of the bar is going to be about 2".
From the center to the top of the bar, is going to be about 3". It gives you enough space to fit most factory roof rack accessories through, without interfering with your roof, or making contact with your roof. Both bars combined do have a carrying capacity of 220 pounds, but you always want to double check with your vehicle's manual, to make sure your roof can withstand those weights.Now that we've got over some of the features of the roof rack system, let's go ahead and show you how it installs. We have our front bar already installed into our flush mounted side rails, and we have our rear bar partially assembled on our table here. Here's the Inno foot pack, and the fit kit, that we're going to need to install on the other side here, as well as the keys for our endcaps, the plastic end for our square bar, and the tool that comes included with the fit kit, to install everything.First, we're going to start by inserting our leg here onto the other end of our square crossbar.
We'll remove our endcap first, using the included keys. We'll slide this end onto our square bar like so. Then we can start installing our fit kit. Next, we'll take our plastic bracket piece here, and we'll fit it underneath the top portion like so. Then we'll flip the bar, and start installing our metal brackets on the underside.
We'll take our bolts with the lock washer and flat washer. Bring them up underneath, and then take our metal brackets, making sure they're facing the proper direction. We'll just loosely install those for now. There we go. We'll repeat this on our opposite side.Our final step, before we set this onto our roof rack system, we'll put our endcap in place, just to make sure that doesn't slide off. Now we can install it. We'll set out bar in place, just being careful, because we don't want to scratch up the vehicle here. You want to make sure how it sets inside the track here, that it's in the right location. You can see how it hooks on the backside here. It grips in this little channel, and on the inside, it grips on the channel the opposite way.Next, we'll measure from center of the bar, to center of the bar, to get a crossbar spread on both spread on both sides. Then we'll measure for our crossbar overhang. Once that is even on both sides, we'll take our included tightening tool, and tighten the bolts down, which will bring those brackets up, and secure the roof rack to the flush mount side rails. Next, will take our endcaps, we'll put those in place. Now we're ready to load up our gear, and hit the road. There you have it for the Inno Square Crossbar Roof Rack System, on our 2018 Jeep Grand Cherokee.
Average Customer Rating: 4.7 out of 5 stars (170 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Easy to install and sturdy for the roof basket that was installed as well. Zero problems for the miles driven and the load on top.
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
Worked great with my little 2008 civic! Easy to install and relatively quiet. Transported a kayak on a 7 hour trip and they didn’t budge.
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
The bars could be longer because you cannot attach two sets of attachments, otherwise they are fine
Really solid bars and end caps, not much more to say!
We planned to leave this on for a short time but it's so unintrusive and functional we've had it on the car for a year now. It works great, we've used it to attach a canoe to the car and we now have a rocketbox attached.
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Perfection
Well made, sturdy, thick and quality materials. Makes no noise at speed, no complaints thus far.
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
these work great in the roof style of the 2007 forester. They DO NOT come with the parts needed to attach them from etrailer so read carefully to make sure they will work with your vehicle.
It was easy to install. Seems to be very stable.
Awesome product. I’ve been looking for a while to find custom fit roof racks for my 2010 Dodge Caliber. the dealership told me I would have to drill them right to my car and the labour would’ve cost me a fortune. I’m so extremely happy that I found etrailer that had exactly what I was looking for! No drilling, and no hassle! The instructions were easy to follow and the assembly went smoothly ! Fast delievery and great customer service. I would 10/10 recommend etrailer to anyone who is looking for durable, stylish looking roof racks for a great price!
Installed on my 2009 Nissan Armada and it fit. If anyone owns an Armada you know that it takes a special kind of crossrail to fit over the large factory roof rails. This did the trick and was cheaper than the other websites. Arrived in less than a week. I’m happy
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
For a roof with no mounts, this is a perfect choice!
The fitment selected for me by etrailer.com for my 2012 Ford Escape was perfect. The Inno Rack System is easy to install (made easier by the use of etrailer.com's instruction video links).
I chose the square bar fitment because I prefer the look over the various "aerodynamic designs", while I prefer the look over others, a wind fairing will prove to eliminate the very hint of sound that does emanate into the cabin.
If you are looking for a Clamp mounted system that requires zero modification/easily removabl this is the system for you.
Works well. They have a rubber boot that goes over the open ends to keep them from making a whistle noise when driving. Don't lose those!
Just installed the etrailer inno square load bars on my 4Runner. I also purchased the Round/square Crossbar Fit Kit .
Looks great and mounted easily to my Prinsu Rack.
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
Fit perfectly on our 2007 Subaru Legacy Wagon w/flush mount rails. We had our doubts but put our faith in C.S. Rep. He was right (of course)!! The fit on the stock rails perfectly. My husband didn't really have trouble installing them at all. We also got the Inno Fit Kit Hooks and the Inno Square Crossbars. Just came back from vacation. They were perfect for my husband's bike. (We did have Thule rails from an earlier bike rack. They fit into the Inno system w/o a problem. Thank You ETrailer for ALL your help. We couldn't have put it all together without you knowledge. Perfect!
We bought this along with the INTR102 Custom Fit Kit. We used this to mount Thule crossbars and a Thule Adventurer cargo box on a 2001 Subaru Forester. Everything fit perfectly. The Inno mounts were completely compatible with the Thule crossbars. The fast and accurate shipping helped avert a crisis before a cross country trip.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.