To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These quiet, aerodynamic crossbars strap to your Jeep Cherokee's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.
Features:
Specs:
The low-profile, aerodynamic Rhino-Rack Vortex StealthBar roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. The crossbars mounts directly to your vehicle's raised, factory side rails. The Vortex StealthBars have built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. These bars blend seamlessly with the support legs to provide a from-the-factory look, and they are custom cut to your specific vehicle. The legs also include built-in locks that protect your gear and the rack from theft.
Aerodynamic Design
The rubberized Vortex strips in the crossbar's top channel disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex StealthBar cuts through the air with minimal drag - even at highway speeds.
The Vortex StealthBar roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.
Strong, Durable Construction
The Vortex StealthBar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding significant amount of weight. And the aluminum bar wont rust so you can leave it on your roof year-round.
The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.
Custom Fit for Easy Installation
The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs, and the bar is pre-cut to match the width of your vehicle's roof. The few remaining assembly steps are straightforward and only require the strap and lock fit kit.
The fit kit includes co-molded, rubber-coated stainless steel straps designed to fit around your raised, factory side rails. To install, remove the leg covers and simply attach the straps to the bottom of each leg. Then wrap the straps around your vehicle's side rails. Lastly, secure the straps to the top of each leg and replace the cover.
Channel-Mounted and Clamp-On Accessories
Each crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersports carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so theyre easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on them.
Built-In Security
Locking covers on each support leg let you secure accessories mounted in the crossbar's top channel. These sturdy nylon covers give the rack a finished look and also secure the rack to your vehicle's roof. The cover locks are keyed a like, so a single key opens all locks.
Alternate Instructions
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2016 Jeep Cherokee, we're gonna be installing the Rhino-Rack vortex stealth bar roof rack system, part number JA7972. This is a kit with two bars. The Rhino-Rack stealth bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your Jeep Cherokee. You can carry items such as cargo boxes, cargo baskets, or ski and snowboard carriers. Aesthetically, this is a very nice-looking roof rack. It has a factory style look to it once it's installed and it sits very low profile on your vehicle, so issues such as height when you have your items on top of your roof isn't as much of an issue when you're pulling back into your garage.The bars themselves are elliptical shaped, so that's gonna cut down wind noise and drag as you drive as well, although there may be some noise while you drive.
And the rubber strips at the top, those can be removed and utilized for T-track accessories by removing the strip and inserting your accessory and then cutting the strip to length around it. You can see how it wraps around your existing factory raised side rail with two leather straps and tightens down with the included tool, which you can place inside the rack once you're finished using it. It does come with lock cores that you can install on the end caps here as well so you can secure your roof rack to your actual factory raised side rails.Next I'd like to give you a couple of quick measurements. From the center of the roof to the bottom of the bar is gonna be about 1 3/8, and from the center to the top is gonna be about 2 3/4. So that's enough space to attach your accessories that wrap around your bars instead of utilize the T-track accessories.Now that we've gone over some of the features of the stealth bar roof rack system, let's go ahead and show you how it installs.
We have the front bar already installed on our factory raised side rails and we have our rear bar partially assembled here on our table. So we'll first go to the screw in the center here, removing that with the included tool. You're gonna remove it all the way, and the straps in these holes are numbered. You wanna go to your instructions to find the proper fit. In our case today, we're going to hole number two.
Gonna reinstall the screw and tighten it back all the way down. And now we'll flip the bar upside down. You wanna make sure that the screw here is also loosened up. Not all the way; just enough to move it around. This will be tightened up later.
And then we'll also install the padding here on the end. This just kinda push fits into place. And now we can set this on our factory raised side rail.Being careful as we set this down, we'll go to the other side, wrap our straps here underneath our bar, have it set on our actual side rail. Next we'll measure from center to center and get that evened up. We're gonna do this one side at a time cause I've found that actually makes it easier. Next we'll wrap our strap around, attaching one end at a time, which is the easier way to do it, and then using the included Allen tool, let's kind of snug this up for now because we're gonna repeat this process on the driver's side. Then we can finish tightening down our straps all the way till they're nice and snug, then we'll tighten down that bolt underneath, and we loosened it up so we can move it back and forth as necessary. Final step is we'll put our end cap in place, make sure it lines up on both sides, pushing it forward, and now we're ready to load up our gear and hit the road.And there you have it for the Rhino-Rack vortex stealth bar roof rack system on our 2016 Jeep Cherokee.
Average Customer Rating: 4.5 out of 5 stars (48 Customer Reviews)
These quiet, aerodynamic crossbars strap to your vehicle's raised, factory side rails to create a super-strong roof rack. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.Excellent service! Definitely will do it again
Thank you etrailer for great communication and fast delivery!
Good solid product...20 minutes to install. Aussies should send instruction in Inches not Millimeters though... and finding the PDF with the fitment settings on their site is a bit of pain....
But bottom-line....wifey very happy she can take her SUP to the pond now. Me, happy she doesnt have to take my truck to do it.
Great low profile design. Better than what Chevrolet offers. Holds up great and handled the weight. Easy to install Make sure you have it spaced out to your desired liking otherwise is a little time consuming to move again but otherwise I would definitely buy again.
Great product, and great service. It not only works well for our thule top box, but looks good on the flex too. I would recommend this to anyone looking for a dependable set of rails.
When I ordered this product I was excited to see the reviews said how fast it shipped. I was not so lucky. The item was back ordered and the website did not indicate that. I received an email saying it would ship in a week so I thought it would arrive in a week. I was wrong. When I called about compatibility with attachments they told me it was back ordered and I wouldn't receive it until mid July. That whole ship in a week meant ship from the distributor to etrailer. Then it would ship to me.
Once it arrived we immediately opened it up and started assembling it. When we got to the part in the directions about attaching it to the car the directions said to go to Rhino-Racks website to find out what hole in the y-straps to use for my particular vehicle. Their website does not have an area with a fitment guide as the directions indicate so I had to call. I spoke with Jeff at Rhino-Rack and he said hole number 3. That was impossibly tight and the strap would not reach. I called back to see if hole 2 two would be acceptable and he said it should be hole 3. Well, we went with hole 2 because there was NO way hole 3 would reach the bolt since steel does not stretch.
Upon attaching the strap around the raised roof rails the strap slipped and I quickly found out the steel loop is as sharp as a kitchen knife as it sliced the tip of my finger. It was cut so deeply and cleanly it took over an hour to stop the bleeding. I called Jeff back to let him know about this problem. Aside from thanking me for letting him know, he did nothing to better the situation. I will say, now that my finger isn't gushing blood and the cross bars are securely attached to my 2015 Hyundai Tucson in hole number 2 on all four of the y-straps, I am pleased with the appearance and how quiet they are when driving.
Some cons, aside from the aforementioned:
-The rubber strip caved in when I strapped one kayak just to the cross bars. I will need to order a new one to prevent water from getting inside and to prevent noise. It is very disappointing when you have something for less than a week and you need to replace parts on it.
-The locks are super cheap and it wouldn't take much for someone to break them if they really wanted my cross bars.
-The options for attachments are very limited. In fact, I almost sent these back because I was having a hard time finding kayak attachments that I liked.
I wouldn't order these again knowing the hassle I've gone through with them.
I bought this rack as a Christmas gift for my daughter's 2023 Subaru Outback Wilderness Wagon. It fit perfectly! It was relatively easy to install with the help of my son-in-law. It is very secure and holds her cargo box very well. After multiple highway trips between Maine, New Hampshire and Massachusetts it hasn't budged!
Great rack for my '23 Outback Wilderness. Lowest profile out there. When installing use fixture point 1 or 2 for the locking strap. If you use 2 it is tight and I had to remove the barrel, attach the strap, and then reattach the barrel. Point 1 is easier and still tightens all the way.
These racks did not noticeably increase the wind noise of my car. They look great, complimenting the appearance of my Jeep, and they were quick and easy to install.
Rack looks sturdy. For my 2017 vw Alltrack the rear bar could be replaced for a shorter. On my side picture that is as far back the bar will go (item ja7975). Which it worked out for this application if you want the bar further aft a shorter bar will be needed. The front fit well within it’s range. The car tapers towards the back so back bar is shorter. I also dont like how VW put a notch on the bottom rail. It looks like the straps will be easy to cut with a bolt cutter.
Appears to be a well made product. I wanted a low profile rail. I would have preferred a clamp style cross bar, like the Yakiima Whispbar, but they were to wide for my Thule Evolution (ski box), mounting brackets.
You need to be careful when attaching the straps when attaching to the bracket and mounting to the rail. The exposed metal portion is very sharp.
The only con is see to this product is the strap mounting system, its more of a hassle to adjust.
I researched low profile bars for 3-4 hours before buying these Stealth Bars. A major reason I went with these is the metal strap inside the rubber band that attaches to your side rails. Other companies just used hard rubber that could easily be slashed with a box cutter.
Of course these lock, which is important. They were also easy to install. I installed one and my wife installed the other.
Thanks etrailer and Rhino Rack.
Product fit well, easy to install. I received a new Ford Expedition at work with an aluminum roof. I have an emergency light with magnetic mounts that will not work on the aluminum roof. Purchased these bars and used them to mount the light without having to put holes in the roof.
First of all, this review is on the actual product not etrailer. They were awesome as always on this purchase (more on that later). Sorry for the long review, but I feel the need….
2014 Jetta Sportwagen
These are not silent. At ~45 mph and less there is a high pitched whistle. At lower highway speeds there is a low level hum, like a monk chant. After that just regular wind/turbulence noise.
On to the install… etrailer website confirmed fitment. In the instructions (step 8) there is a need to go to the manufactures website to find a vehicle specific info. My vehicle came back as not supported. So called etrailer and as always, awesome. Took her a bit – I offered to end call while she searched – but she did send me a supplemental sheet and even had taken the time to read them and suggests the proper fitment. Kudos to Cathryn B.
Step 1 and 2 are misleading in a way. Step 3 should be step 1. Step 2 shows just the bar with no ends, which is never needed during the install and you would have had to complete steps 4&5 to get to that point.
In step 1, inserting the rubber fully is not going to happen with just your hand. I used a chopstick to push the nipple fully into the hole. Could use the (provided) allen wrench but that could tear the rubber.
There are two different crossbar lengths provided and the install location is not specified until step 10. Kinda should be mentioned up front as the install location is specific due to this.….
Step 4/5 – even after loosening the bolt it still had a catch when adjusting length. I thought it was at the end of the road but when it was still too short while attempting to connect to my rails I looked over and saw that I had another inch or so, took a bit of muscle to get past that position.
Step 6 – the crossbars on one had apparently fallen out during shipping – took a few minutes to hunt down in the box/packing material.
***Step 11 – HEED THE WARNING. I’VE GOT OLD MAN LEATHER FINGERS AND STILL WAS BLEEDING LIKE A STUCK PIG. I WOULD RECOMMEND PUTTING BANDAIDS ON YOUR INDEX FINDER PRIOR TO THIS STEP. Also make sure you have the t-bolt just barely on the threads as it will give you maximum slack to complete te step, hopefully without causing injury.
Step 13 – please define ‘overtighten’. Lots of room for interpretation there.
Step 15 - I would truly like to see a video of someone successfully completing this step. If all other factors of the install are done correctly, I don’t feel this is needed anyway so I gave up after about five minutes.
Final, and biggest issue, is the sunroof. I don’t use it often so not sure if this will cause me to return the product, but a ‘guaranteed fitment’ means this should not be an issue.
First issue is that it rubs when the sunroof is open. Second is apparently my sunroof has a sensor that keeps it from closing if it sense too much pressure. Third is to compensate for this I had to move from my preferred rearward location to all the way forward. It rubs in both positions however at the forward location the sensor (so far) has not picked up on it despite having a longer time / area rubbing when opening and closing. I did push down on the crossbar as much as I could (and I’m semi fat) to simulate a load and still opens / closes. Now, because of the forward location I have a nice wide black bar blocking the center of my sunroof.
2021 Subaru Crosstrek,
Website video for installation was easy to follow, installed to spec, might have to adjust span when I get my roof basket. Cross bar seems solid, and was what
I wanted, a little better than OEM. Look great
It looks great. I have not heard any noise from these bars, so far while driving. The crossbars were installed on a 2022 Subaru Outback Wilderness. The Rhino-rack hardware kit RSK01 was shipped separately. It contains four CA1319 RSB Short Locking Straps. Hole #1 (i.e. the farthest hole) worked best for the installation.
Looks like good quality product. The only problem was I didn't know what hole to use on locking strap, called Rhinorack.com headquarters. They quickly got info I needed for my vehicle. Wish there was an insert with that info.
Perfect fit for our 2013 Ford Flex. It was easy to install and seems to be very secure. We've already used it with our rooftop carrier box and it's worked quite well
I had one problem with my order: one of the cross bars was missing the rubber vortex strips. If you could have someone send these out it would be greatly appreciated.
Other than that, I'm very satisfied with the product.
The stealth bars are sturdy and low noise. But they are so close to the roof of my 2016 Escort that the knobs for attaching the J-hook kayak carrier rub the roof. I put a eighth inch hard rubber pad between the rails and the crossbars and removed some of the unthreaded portion of the knobs to make them fit to my satisfaction.
Great job etrailer!!!! I received a phone call from etrailer about my credit card. Once all was cleared, I received my crossbars in 2 days. I was surprised how quickly I received them.. Installing the crossbars was pretty simple. The first one always takes a little longer; reading the instructions; going slow, making sure I am doing everything right. The second bar took half the time, if that much. The outside noise that other customers complain about, is none existant unless I am traveling over 70mph.Definitely recommend the product.
Very well-made and easy to install. As-advertised, these are compatible with a 2021 Subaru Crosstrek. They don't interfere with the operation of the sunroof - this had been a concern but there are no issues at all. They are low-profile and look good on the car. We'll use these to transport a paddleboard and kayak.
Works well on a 2021 Mini Countryman JCW
I got these for my '22 BMW X7. There are really tight on the factory rails to remove/install. Quality of the bars is solid. They do clear the sunroof.
Do you have a question about this Roof Rack?
Rhino Rack Accessories
Fit to this rack on your 2016 Jeep Cherokee
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
6/1/2021
Thank you for your review. Here is the link to the instructions: http:vpm.cdn.rhinorack.com.auInstructionsRoofRacksRSBRSB.pdf