Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.
Features:
Specs:
This low-profile Inno Aero crossbar lets you build a stylish, aerodynamic roof rack for your vehicle. The crossbar requires 2 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbar. A built-in T-slot in the top of the bar lets you easily mount carriers and accessories on the rack. A flexible rubber strip in the channel keeps out dirt and requires no trimming or adjustment. The crossbar is also constructed of strong yet lightweight aluminum so it won't rust.
This lightweight bar has an elliptical shape. The aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.
The Inno Aero crossbar is constructed of sturdy, lightweight aluminum. An internal extrusion adds strength and structural rigidity without adding a significant amount of weight. The bar is rustproof so you can leave it on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.
This crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. A built-in stop in the channel will keep the foot from sliding off the end of the bar.
To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbar.
This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.
You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Inno Aero crossbar. This is a low-profile crossbar that lets you build a stylish, aerodynamic roof rack for your vehicle. The crossbar requires two Inno Flush or Through feet to mount the bar to your roof. This is going to come with one crossbar. This is a half kit. It may also require a vehicle-specific custom fit kit depending on your application.
Vehicle-specific custom fit kits are sold separately and available at etrailer.com.Now this bar features a really nice elliptical shape that helps create an aerodynamic system. Really helps reduce wind noise and drag as you drive down the road. The unit does feature a slight bend at the center of the bar. That's going to help ensure a sturdy custom fit rack. It also features the integrated t-slot.
That makes it easy to slide channel-mounted carriers and accessories onto the bar. This bar also accepts clamp-on accessories that would conveniently wrap around the bar.This rubber strip is a flexible rubber strip that keeps dirt out and allows for simple mounting in the t-slot. All you got to do is press down on the strip and slide in your accessories. No trimming of that strip is required. That strip actually features a nice plastic coating that allows the t-bolts to slide easily along the channel.
Also creates a cushion and a non-slip platform for your gear.On the bottom of the bar it features a channel located on each end. That bottom channel allows easy installation to Inno roof rack feet. Simply clip the foot into the crossbar and slide it along the channel to where you need it for your application.This bar is made from a lightweight aluminum construction. It's very durable and it's rustproof. It features an internal extrusion.
That's going to provide exceptional bar strength. The unit features glass-blasted, powder-coated finishing. That's designed to resist corrosion, scuffs, and scratches. It's matte black in color, gives the bar a really nice, clean look. Locking covers or end caps come with Inno feet. Again, you're going to get one crossbar. From edge to edge it measures 3-1/8" wide by 1-1/8" tall or thick. The bar is available in a variety of lengths. You can check out etrailer.com to see all the options available. It's covered with a limited lifetime warranty. That's going to do it for today's look at the Inno Aero crossbar.
Average Customer Rating: 4.8 out of 5 stars (314 Customer Reviews)
Low-profile, aerodynamic crossbar lets you build an aftermarket roof rack for your vehicle. Aluminum bar has a T-slot that lets you mount channel-mounted carriers and accessories. Rubber strip in T-slot keeps out dirt and won't need trimming.Ellen was very knowledgable about the product and helpful in getting the exchange processed. And while the product itself seems to be of excellent quality, I did have to trim the crossbars a bit in order for them to fit precisely enough that the plastic pieces that cover the metal hardware could actually fit properly and be locked on, as they are supposed to be. There is no leeway for a non-perfect fit. It would be easy for me to mount a new set if I had to, but doing it for the first time was very time-consuming. The mechanism is somewhat complicated, and the directions were OK but could have been a little clearer on a couple of the procedures. Try it some time and you'll see what I mean.
I've been a happy etrailer customer for years. Sales staff helped me pick out the right roof rack setup for my new 2023 Escape that worked with my low-profile rails. 3 separate boxes of pieces but they all came together perfectly. Very happy with my purchase and etrailer customer support! Rack is solid, low wind noise and will work with the accessories I need, kayak carrier and cargo basket.
Got these with the custom fit kit (INK860) and the through feet/stays (INXS250) for my 2014 Ford Fusion Hybrid. Assembly's not difficult, though you do have to work with three different instructions: 1 for the stays/feet (the main install instructions), one for the Crossbars (minimal to do there), and one for the custom fit kit (again, minimal, though this one is crucial as it contains the measurements for the setup).
Things went pretty smoothly. However, when I put it on my roof at the measured distances from the center line, the feet didn't both occupy the rain gutter as they are supposed to. I checked the measurements, and both the front stays were at 21.5" and both back stays were at 21 3/8 " . Since those were the called for measurements, I'm not sure why I didn't fit perfectly. However, they're great and I can't wait to put them to use with my kayak and snowboard and bike. Thanks E-Trailer.
Photos show how great the system looks as well as some of the gaps at the rain gutters. I don't think it's crucial to readjust those. I did try several times but couldn't seem to get them just right.
Prefect fit and looks great on my 2008 Evo X. The install videos made it super easy to put together and install.
Noisy driving down the road. The whistle driving at 60mph is ridiculous and the best part, you can’t even exchange them! Thank you for making me look elsewhere for anything that you sell.
Very nice quality, made in Japan. Easy to install using the Inno XS150 base stays. The 51" was a nice size for my 2015 Touareg. Many of the manufacturers recomment wider (53-54"), but I like the narrower profile. Unfortunately, the Aero design still creates a slight bit of wind noise at highway speeds, and it gets worse if the sunroof is raised (vent). I like the soft rubber T-channel material which allows the accessories to mount without cutting the material. I also like the slightly arched shape.
I have a 2022 Lexus GX460 Premium. Fairly simple installation and a almost seem less transition from the fit kit to the cross bar system. Can be done by one person, but I would suggest a two-person system to expedite the process
Very easy ordering process. Super friendly staff. Correct parts and the Inno rack turned out to be much higher quality than I anticipated. Overall, great experience!
Once again etrailer.com delivers. Finding a crossbar solution for my 2021 Lexus GX 460 was far more challenging than expected until I visited the site and found exactly what I needed. The fit kit worked great and the quality of the feet and crossbars on par or better than other brands (who dropped the ball on having a product available for this vehicle). The rack is on, secure and now carrying my Thule cargo box. Very happy.
Originally, I was waiting for the Yakima crossbars to be restocked for my GX460 but decided I couldn’t wait it out any longer and went with the Inno’s aero set. Overall, they look great, fit great and seem to be very good quality. I was able to assemble the rack myself, it took me about an hour and half, I wish the installation was a bit easier but after watching the video from etrailer it all came together perfectly !
Aero roof rack is very stylish and gives my car a good look. It’s low profile look is what I really enjoy about it. The bars are pretty wide so any bars you do add to them, you’ll have to do IN-DEPTH research to make sure they do fit. I’ve had some run in with some issues with bike racks
Well made.
I recently drove round trip in terrible weather to Boston from Orlando a trip of over 1500 miles...My Inno Elliptical Roof Bars Roof Rack held up perfectly.
I especially like the "keyed" function. I highly recommend them to anyone needing a strong, weatherproof, and secure roof rack.
Perfect fit on our vehicle and they feel strong and sturdy. Install wasn’t bad either. Very happy with the kit at this point and will test them out this weekend.
Installation went pretty smoothly. The trick is to fully understand each step before moving to the next. There are a lot of small parts which at first was a little intimidating, but soon I was able to "get with it". I love the finished product and think you helped me get a good deal. Thank you for that
Great fit for my 2023 4Runner and looks amazing.
I was concerned that other brands that clamp to the existing roof rails could pop-off from upward forces due to bumps/wind (I have 2 17’ sea kayaks) - these INNO clamps have a strap that securely holds the bars in place.
Perfect height to be able to get straps/clamps under the bars, but low enough to keep them from hitting my garage door opening.
Great quality and super easy to install.
This inno rack fits well with my car. I installed a cargo box with it. The roof rack is well built and sturdy.
I just received and instilled my rack system. Time will tell, but my initial reaction is that of disappointment with the quality of the system, considering what I spent. The cross bars seem to be plastic, and the end caps on the cross bars seem to be plastic and covered with a faux metal chrome. I am curious to see how well this system holds up to the hot Florida sun. The positive is that I like the general shape of the aero crossbars, and they are relatively quiet when I am driving.
Shipping and packaging was very good and delivered on time!
Glad I went with the Aero cross bars for the less wind noise!
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
Love my new rack used it for the first time yesterday and no road noice!! The reason I picked this particular rack. Easy to get my paddle board up on it by myself! Love the look too, and super fast shipping!
great bars, they have a slight curve to them so they look more natural, like they were made with the car, i went with 2 of the same size on my kicks, even though it was suggested to have one shorter, i think it looked much better in the long run.
They weren't as quiet as I thought they'd be. Better than the ones I replaced
One was extremely hard to get on compared to the others (not sure if it was rough machining or something), but once it was on, all was good.
Overall great product. Wife hears a little whistle. With radio on all good for now.
Do you have a question about this Roof Rack?
Condition: Badly Dinged
Notes: Bar has a slight dent in it, strictly cosmetic like new.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.