Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet Inno Feet for Squa

Very sturdy and well made. The initial fitting took me a few times reading the directions to grasp, but it was also early in the morning so that could have been a user issue. Once all was tightened down though they are rock steady and along with the pads and bars hauled my kayak with ease.1773504

I received this roof rack kit on the exact day that it was estimated to. Everything was well packed, instructions were clear, and the whole thing went together without a glitch. Road tested it for noise, and didn't detect anything noticeable at 90 KPH. As usual with Etrailer, very pleased with the whole experience.1773469

by: Mark 01/10/2024

Fit perfectly. A bit expensive but what isn’t anymore.1773491

If you're a Lexus GX460 owner, think the OEM cross bars are wimpy, and don't want to shell out $500-$600 for "aero" style bars, this is for you.

I chose the Inno INXP base over the INTR base because I thought it looked sleeker, and I wanted as much clearance over the shark fin antenna as I could (although both bases clear the antenna, the INXP is taller). The product description is slightly different for the two bases, but both of them are able to slide along the factory flush rails. Choosing between the two is a matter of taste.

A couple of hints for installation:
-I didn't receive an English copy of the installation instructions for the base, but was able to figure it out anyway. You could easily find them online.
-The screws that come with the base aren't needed, use the longer ones that come with the fit kit.
-Loosely attach the fit hooks, clip the base on top, slide the rail through, THEN tighten the screws.
-When putting the fit hooks on the rails before putting the base on top, make sure the screws are backed out as much as physically possible without disconnecting. Even still there is very little play when sliding the rails through before tightening everything down. It would be nice if the screws were even 1/8" longer, but it would only make installation easier. Once everything is tightened down it's as solid as can be.

Overall I'm very happy. I like the more rugged look of the square bars, and shaking them moves the whole vehicle and they don't budge.1773495

Click to Enlarge

Click to Enlarge

My order showed up quicker than expected and installed without too much hassle by myself. My only issue is that I expected the adapter parts to level out the mounting feet so that the two cross bars are in line. But nothing like that occurred so the bars sit at an able to each other. Maybe I'm missing something, but it seems to still work, just not what I expected. 1773497

Click to Enlarge

Pretty cool setup, instructions just need to to be better and all parts should be in one box1773498

The quality and strength of the steel was never in question, and everything bolted up as normal.1773502

Seem to be good quality, and fit in the other parts properly.1773471

The Inno product allowed us to use our older style square Thule bars with two Hullavators on our new vehicle which saved us many headaches and money.1773501

I ordered roof racks for our new to us car. Once I placed the order I decided I wanted longer cross bars. I cancelled the bars on the order but couldn't figure out to add the bars I wanted. I called etrailer and was connected to Ashley. Ashley helped me to get the bars I wanted. She kept in touch, letting me know about shipment, a slight delay in the shipment and when the shipment was expected to arrive. Ashly gave my purchase a personal touch that I really appreciated.1773494

Same as for the install kit. Too many part, too much install, and I didn't have the confidence in it that I would like. I think they try to adapt a 'standard' kit and then wind up having to include more hardware to make it work. Disappointing.1773500

by: Scott09/11/2020

Sturdy metal roof rack bars. Able to hold several heavy ladders from job-to-job all year long.1773472

These bases seem to be made of rugged and reliable materials however I cannot figure out how to get them onto the track Is of my Leer truck cap. This product claims to fit tracks, but I can't see how without some sort of a pedestal that attaches to the track.1773503

Did. It come with obviously needed steel fittings to attach to roof rails. Needed to order separately and none in stock1773490

by: Peter04/05/2018

It arrived with all its parts and all in good shape. Instructions for assembly were clear and it fit the car as needed. Since, it has done everything expected of it.1773496

Adam got me the right product for my custom naked roof when two other sales people failed.1773487

by: Mark05/16/2022

As described. Easy to install and works well. one year on still very happy with this purchase.1773488

by: Jonathan04/07/2022

Can’t give accurate rating seeing as I sold due to issues finding the fit kit for my vehicle1773489

by: Happy C09/08/2021

Great fit and great price. 1773492

Quality product. Will give years of use. 1773499

by: Tad 02/27/2024

1773485

1773484

by: Frank 11/23/2021

1773480

by: Lindsey 05/05/2021

1773475

by: Michael 10/15/2021

1773470