To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars - 47" Long - Silver - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Colin: Hey everyone. It's Colin here at etrailer. Today we have a 2020 Hyundai Santa Fe. We're going to do a test fit of the Thule Wingbar Evo roof rack system. Now, this is a roof rack system that's been designed by Thule to mount to the flush-mount side rails of your Santa Fe. It's going to allow you to get your favorite rooftop accessories loaded up, whether it's a bike rack, kayak carrier, maybe even a rooftop cargo box with those accessories on your roof.
It's going to create more space on the inside of your vehicle for passengers, give you some elbow and leg room. Especially with those bigger items like a kayak, more times than not you're probably not going to be able to get it in your vehicle anyway, so being able to get that on your roof is going to make a world of difference.Now up top, we have our 47" long wingbar evo crossbars. We have these in black right now, but they're also available in silver. If you think that will match your Santa Fe better, just go ahead and check out our website. We've got both available.
Now what's nice is that we have a nice aerodynamic shape to our crossbars. This is going to help cut down on that wind noise and drag, especially when you compare it to a standard square or round bar roof rack system. We're going to flip open that cap. We have a channel right here where we can mount T slot accessories. What's nice is that Thule's made an upgrade to these bars.
We no longer have to pull the rubber strips out and then cut them to length. We can just slide our accessory in between the both strips to our desired location, tighten it down, and then we'll just bring the end cap back up, close it, and now we're good to go.Now right here we have our Thule podium foot pack. This is what's connecting our crossbars to our raised side rails along with our fit kit. I'm going to go ahead and take this little flat headed trim panel tool and get this lock off. Pull the end cap off.
Right here in this rubber coated bracket is our fit kit for the Hyundai Santa Fe. It's made to match the contours of our raised side rails, and clamp down on them very nicely. That rubber coating is not going to harm or scratch the finish of your raised side rail, so it's going to be in good shape in case you ever want to take this off of your roof. When I put the end cap back on, like I said, take a flat headed tool, whether this is a screwdriver, this trim panel tool, maybe even a coin. We have these plastic locks included with the podium foot pack, which you can replace with the same key system from Thule. That will just provide more security for your roof rack.Now I'm going to give you guys a few measurements. First, from the top of our roof to the bottom of our wingbar is going to be 3 3/4". It should be more than enough space to get your clamp on accessories under your wingbars without risking damaging the top of your roof, whether it's the paint job or the moon roof that we have on this Santa Fe. Now, if we go from the top of our roof to the top of our wingbar, it's going to be 4 3/4". Just want to keep that in mind for any low clearance situations, that you have that added height to your roof. Although with the Santa Fe you probably won't run into that too often, it's always something to keep in mind. Our wing bar system is going to have a weight capacity of 220 pounds, but always make sure you double check with your Santa Fe's owner's manual. Make sure your roof can handle that weight before you load it up.Well, now that we've gone over some of those features, let's show you guys how to get this assembled and installed on your Santa Fe. I'll go ahead and show you how to get the rear crossbar assembled. We already have the front one assembled and installed. It's going to be the exact same process for both of them. Real quick, I do want to point out how I got the front crossbar in place. I just measured from the edge of my flush-mounted side rail to the edge of my podium foot on both sides, and then I tightened it down. Now I'm just going to flip my crossbar over. We're going to take our fit kit bracket right here that's for our Hyundai Santa Fe. We're going to feed it through from the backside right here, and you can see there's a hole right here where I'm going to thread it in, this bolt. Feed it through there, just get it threaded on. See how it's threaded in there now It's in that center hole. Tug on it. We know it's good.We're going to come over here and take our end cap off by pressing down on this tab. Pull the end cap off. Now we'll take our podium foot with our bracket connected to it. The track right here is going to go into our channel. I'm going to push that scale back just like this. We'll put our end cap back on. Now we're ready to get it on our roof. We'll just reach it over the top. Get that far bracket on, and the same thing over here. Before we tighten anything down, we're going to go ahead and measure our crossbar spread. Now to measure our spread, we're going to go from the front of our front wingbar to the front of our back wingbar. There's no set measurement. You do want to make sure you're around 70 cm, or 27 1/2", depending on which unit you're measuring with. I would say probably within 3" or 4", or about 10 cm on each side, whether you go bigger or smaller. You can base it off of whatever accessory you might be using.I'm going to go ahead and set it to 70 cm, and we'll go to the other side and do the same thing. You may want to make sure this rubber coated bracket is sitting under the lip of your raised flush-mounted side rail, and we'll just start tightening it down. What's nice is that tightening down this bolt is also going to lock the podium foot pack inside the channel of your crossbar, so you'll see when I get this fully secured. No need to over-tighten it; just get it pretty snug. Go a couple more turns, probably good right there, but like I said, it locks inside the channel. Now I cannot move that crossbar. You also want to make sure you get the other side tightened down as well.Now from there, we'll just go ahead and put our end caps on. Like I said, just find some type of flat object, coin, screwdriver, maybe even this trim panel tool. Lock up that end cap, and then once you're done, it's always a good idea to go ahead and grab ahold of both of your crossbars. Give your roof rack a good shake. You see that the entire vehicle is moving, so we know that our roof rack is secure. Now we're ready to load up our favorite Thule roof rack accessories, and then hit the road.Well, thank you all for watching. That's going to do it for our test fit of the Thule Wingbar Evo roof rack system on our 2020 Hyundai Santa Fe.
Average Customer Rating: 4.8 out of 5 stars (272 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.Easy to assemble and install. Love the way etrailer packages everything you need and they all are correct for the vehicle you are mounting them on. Once installed they appear very strong. Installed on a 2023 Chevy Tahoe and did not interfere with the sunroof.
Very sturdy. Works well. The attachment to the roof rails on my 2023 chevy suburban works well. The "C" clamp design mechanism holds it tightly and securely in place. No fear of anything coming loose and falling off like other racks I have tried to use.
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Favorite bar Thule makes. Super solid.
Once the mounting kit was installed, the fit was great. Too expensive though. etrailer ordering and shipping process was fantastic.
Easy to install. Super-fast shipping. Quality product. Glad I shopped with etrailer.
Solid roof rack, but get help from etrailer to make sure you get the core feet.
Very pleased with order. Shipped fast, not damaged, all parts accounted for. Easy install, very sturdy, and attractive design. Slight wind noise but that was expected compared to not having a roof rack.
Excellent product. Arrived when promised. Very pleased. Thank you.
This is the first top of the line roof rack system I have purchased. I never expected to have issues but this thing is so universal, with gaps everywhere, that I can’t get it to stop whistling. I wish I could return and get my money back. I really expected something better from such an expensive system.
Fit my 2015 Kia Sorento perfectly
We just purchased a 2019 Hyundai Santa Fe as our retirement vehicle for traveling. We wanted to install cargo accessories but the dealer prices were WAY to high. After researching for several days we found etrailer.com. The prices were the best we found and the service was outstanding! We installed a Thule roof rack system that fits flawlessly and allows the panorama sun roof to plenty of roof to operate. The videos made in really easy to install. We also installed a trailer hitch system. The Tekonsha Trailer Wiring kit was also a piece of cake to install. If you're hesitant to work on electrical systems, there's no need to be afraid. It's actually easier than it looks in the video.
The Curt Trailer Hitch gave me major headaches. The delivery company banged the box up pretty badly. Apparently it tweaked the hitch just enough so that the holes were misaligned. No problem, after talking me through the installation one more time to be sure it was damaged, they shipped a new unit. The second hitch went in fine. It took a while, and it's not as easy as it looks in the video, but I'm 67 years old I did the installation myself...
Overall, I gave five stars because the price match guaranty makes it a wise choice price wise. he videos are a big help during installation. But the real difference is the service. A lot of folks provide good service to make a sale, but etrailer goes the extra distance to provide great service afterwards. That's unique! Thanks etrailer!
Website is easy to use & is better at putting together the correct package than Thule’s site.
etrailer had all the parts in stock for my 2020 Kia Telluride.
Payment process was simple.
Received periodic updates from staffer on my order & could actually reply if needed.
Installing the roof rack went well. Estimate start to finish was about 2 hours. Found it best to really examine each diagram in Thule’s step by step instructions to get it all right on the first try.
Hardness part of the installation was getting the crossbars installed at the proper distances. A tailor’s soft measuring tape & some masking were great aids.
Bought the Thule Wingbar Evo 118 crossbars and Thule Evo Raised Rail footers and installed them on my 2016 RAV4. Pretty easy to install and I did watch a few videos online to make sure I was doing everything right. I like the new raised rail system from Thule as it is clamp style versus the rubber strap - both work very well, but the newer clamp system is nice because the tool you use to tighten the footings clicks when it reaches the right tightness so you don't over tighten it. I recommend these rails and the footings (Thule 710401) as the system is quiet when driving and looks good.
It was hard to know what to order. We ordered 2 kits and thought that would hook up to our roof top. But no we needed a 3rd kit. I guess some people only need repair kits. It would be helpful to have one complete kit and then other parts needed for things like a repair job. Was not very had to assemble once we had everything.
Thule Rack looks awesome on my Kia Telluride. Products took a while to get to me because they were on backorder but it's not etrailer, they were on backorder everywhere. I messed up one of the pieces of rubber while installing and etrailer sent me a new one at no charge. Definitely recommend etrailer.
I spent a whole weekend looking for all these parts - no one had the entire kit in stock, they had one but not the other. I stumbled upon etrailer.com and was blown away by how easy they made the shopping experience - entered my vehicles info and they told me exactly what I needed! It doesn’t stop there, they also shipped my items within 3 days of ordering. I will definitely use them again when the time comes and recommend you do the same.
I’ve had it on my 2021 Kia Telluride now for a few months and it works great. When I was mounting the forward bar, I opened the sun roof to make sure I was comfortable with the roof window and bar clearance.
I am very pleased with my purchase, great prices, great quality parts, and excellent customer service.
I’d give a 4, since the rack is great, but the website picture gives the impression that there are core locks.
Thule makes great products
And etrailer makes it too easy to get when needed.
etrailer.com was excellent to do business with. Their website is informative, complete and easy to navigate. Phone service to help confirm availability of my product and their general knowledge of their products was impressive. Product arrived on time and in good shape. Their order tracking system is also very good. I’m very pleased with the Thule Wingbar Evo 135 racks For my BMW X5 with flush roof rails. They are super sturdy, solidly mounted and look good on the vehicle. Mine will be mainly used for surfboards and SUP’s. The assembly and installation was a breeze. The included written instructions would have been sufficient for a seamless installation but I also watched one of many YouTube videos that demonstrated very clearly every step of assembly and installation for this specific set of racks.
Love the racks!! I highly recommend etrailer.com for your roof rack needs.
Easy to install. It fit great on my 21 Tahoe. I do wish it came with the locks for the price. I do admit though, a thief would really need to want them to take the time to get them off. It is not a snatch and grab type item. All four clamps would need to be loosened. They are very solid though. I did not notice much extra wind noise either on the maiden voyage.
Quick, easy, and solid installation.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.