Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y84TB
Our Price: $688.80
Confirmed to Fit
2005 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (218)
- Q & A (0)
- Videos (7)
- Photos
Yakima Roof Rack - Y84TB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Black
- Yakima
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 50" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 8 Fit Kit:
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with factory track racks
- Attach to factory tracks with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000228 Landing Pad 8 for Yakima Control Towers
8000425 Yakima Jet Stream Cross Bars - Aluminum - 50" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Review - 2017 Honda CR-V
Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to.
It can work with bike racks, cargo baskets, or cargo boxes, and the general shape of the bars is going to be an aerodynamic shape. That's going to help cut down wind noise and drag while you drive.Moving our end cap here, this also works with T-Track accessories, but unlike the others, you actually just push down the strip at the top here so the T-Track accessory just slides in there that way. A lot of the other styles out there, you'll have to remove the strip, cut it to length, and kind of go through a hassle to get this installed, and this eliminates that for you.At the ends here, we do have these plastic locks that can be taken out and removed, and replaced with the Yakima SKS lock system, so you can secure this to your vehicle and also make inaudible 00:01:28 with your accessories that you're hauling. And, once everything is finished with your trip, these just can pop out of place by opening the ends and we have these plastic pieces that fit on top here, so you don't have to remove the mounts, and they're ready to go for next time.Now that we've shown you how this looks here, let's go ahead and show you how it actually installs. We have our rear bar partially assembled on our table here.
We'll go through the process of installing it onto our vehicle. We have the bar and the towers applied on one side, so our next step is we're going to go to the tower here as well as the fit kit for our actual bar, and install that on the other side.Starting with our plastic piece here that just pushes in place on top of our tower until you hear a light click. Then we'll take our metal piece here, which attaches to this screw on the inside. Then you tighten that down with the included tool. You're going to hear two or three audible clicks once this is done, like so.
Then we can slide this into the bottom of the bar. Then our final step is putting in our end cap.Now we can move on to our actual mounting point here. We'll take the padded portion and these points here will fit into the holes in the bottom. Just kind of match up. Then just push them into place like so.
Then we'll take the screws and the flat washers and install them onto our fixed mounting points onto our flush mount side rails. Find our points, and find the proper configuration, too, that works best for your vehicle. We'll get these finger tightened first. Then we use the tightening tool and finish them off.Now we can take our bar and set it into place as well, making sure that they're open all the way. We'll set them into our cradles. Our landing pads, I should say. And then we'll get the crossbar overhang figured out as well. You're going to want to make sure that that's even on both sides. Have to loosen it up just a little bit. And try not to do that. There we go. All right, that looks good. Our final step is to tighten down the bolt in the center here. This is going to tighten up the tower to our bar. That's done. Close this up, and that'll lock it to the landing pad, and repeat this on the driver's side as well.Next, I'm going to give you a couple quick measurements here that'll help you out in regards to the height that it's going to add to your vehicle. We're going to start in the center of the roof and measure to the bottom and the top of the bar. From the center to the bottom, it's going to be about five inches. From the center to the top, it's going to be about five and seven eighths inches, so that's adding quite a bit to the top of your roof, so keep that in mind when you have your bike racks and your cargo baskets fully loaded when you're pulling it into your garage. And this roof rack system does have 165 pounds of carrying capacity once installed, but you always want to double check with your vehicle's manual and go by its recommendations, and go by the smaller of the two numbers. And there you have it for the Yakima JetStream roof rack system on our 2017 Honda CR-V.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y84TB
Average Customer Rating: 4.8 out of 5 stars (218 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Alvin04/17/2024
Super happy with my purchase from e trailers purchased yakima roof rack. Knowledgeable sales rep.Help me through the process on purchasing my roof rack Recommended to anyone quality parts
by: John11/16/2023
Mazda
For a 2015 Mazda 3, 4 door sedan.
I used the 50" jetstream bars with the skyline towers and the #22 Landing Pads.
Went together easy, great quality, very solid feeling! And, easy to remove and install when needed.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze.
by: Thomas 09/22/2023
Still look and work great after a year. Fantastic investment and they didn't reduce my fuel economy. They don't produce a lot of wind noise either.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Vannack01/04/2020
I chose Yakima because I had one in the past and they were always reliable. Thule was my next choice but didn’t like the look of 53’ crossbars on my car. I really appreciated the easy to follow instruction that made installation a breeze. The kit came complete with everything I needed to install right out of the box. I purchased the 2 Hightower bike racks to go with the roof rack system and plan to safely secure both bikes for our trips. It was a bit heavier than I anticipated (combined with the bike carriers) which will hurt my MPG but having easy access to disassemble the bike carriers when not in use made it a no brained. Additionally, I love the look of the system on my car.
by: Stephen07/07/2020
2019 Hyundai Santa Fe
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
by: Aidan08/19/2023
2012 Toyota Prius
Great bars and easy installation on my 2012 Prius C
by: Josh 04/15/2017
The yakima jetstream crossbar looks beautiful. Quality is great. Took my vehicle for a test drive, and i didnt hear anything loose or broken from the bars. Very satisfied with the product and the instructions were great. It was my first time installing a roof rack too.
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Oliver05/30/2021
BMW
Lightweight and actually quite quiet with no attachments on them. With my bike racks there is a fair amount of noise but it doesn't come from just these. Mine is on a 2011 BMW 335.
by: Andrew07/17/2020
The installation was super easy, and despite a long time stuck in shipping the delivery itself was extremely fast, and the package arrived in spotless condition. The manuals were very easy to follow, and the end result is absolutely amazing. I love that there's a rubber piece in the top rail that doesn't need to be cut, which makes it a very flush and smooth fit. I also love the modularity and the weight that it can handle, especially for the stuff i plan on carrying.
by: Kevin 11/14/2023
not installed yet but everything was delivered on time and in good condition
by: Dan 11/06/2023
Great company. Fast delivery.
by: Alexander12/11/2017
Jeep Cherokee
Super solid rack and the only one that fits the Jeep Cherokee without rails well and looks good too. Easy to install and worth the price
by: Barry09/29/2022
the product was exceptional. I would recommend it to anyone, who has a vehicle with a naked roof. It is a solid as a factory installed rack. Josh went out of his way to get me a replacement torque screw driver because the first one from Yakima was working properly.
by: Angela04/08/2021
Very happy with our purchase. I love how easily you can remove the entire rack easily. Too bad the locking mechanism comes separately but we are still happy with what we received.
by: Steven 10/16/2023
Great product. Great service.
by: Porfirio10/26/2023
very informative and great work
by: Roger03/24/2020
robert s was terrific !!! excellent customer service !!! from assisting with a return, to recommending an alternative, to informing me about delivery status ...
the yakima jetstream crossbars with baseline towers were a bit more complicated to assemble and install than the brand i returned, but the wind noise and whistling are dramatically less ...
the next step is to select a cargo carrier ... it goes without saying that i will consult robert again ... thanks so much robert, and safe and happy travels to all
by: Ernesto07/23/2022
Nissan Rogue
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
25
650
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer...
- Roof Rack Recommendation for Carry Thule Motion XT Box on a 2023 Lexus GX 460It does look like the OEM roof rack kit on your 2023 Lexus GX 460 is going to sit really close to your roof so I recommend replacing that with an aftermarket system to ensure you have enough clearance to your roof for the Thule Motion XT Rooftop Cargo Box # TH629706 to fit. I recommend using the Yakima JetStream system which includes the following parts: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y96AR - Lock Core Kit # Y07204 (optional)
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer...
- Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Recommended Roof Rack for a 2024 Mazda CX-50 w/ Flush Rails To add a roof rack to a 2024 Mazda CX-50 with flush rails, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
view full answer... - Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer...
- How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer...
- Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - Kayak Carriers, Ski Racks, and Bike Racks for 2024 Jeep Grand Cherokee LaredoI'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier # RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for corrosion resistance, and comes with locks to keep your skis secure. Three kayaks will be a bit more challenging. Since space will be limited even with an aftermarket roof rack I recommend using the Malone FoldAway-5 # MAL38FR along with a J-style...
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer...
- 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - How to Add Crossbars to a 2024 Honda CR-V w/ Flush Roof RailsYes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - Wind Fairing To Reduce Noise on 2019 Honda PilotSorry to hear that, noise typically isn't a major issue with the JetStream bars # Y00425. A fairing will definitely help reduce any whistling as well as drag. Sticking with Yakima, we have the following available: -Yakima WindShield Fairing for Roof Racks - 34" Long # Y05016 -Yakima WindShield Fairing for Roof Racks - 40" Long # Y05017 -Yakima WindShield Fairing for Roof Racks - 46" Long # Y05018 -Yakima WindShield Fairing for Roof Racks - 52" Long # Y05019 You will need to measure...
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - What Is The Difference Between T-Slot Mounting Hardware 8860085 And Y03098Yes, the Replacement T-Slot Mounting Hardware for Yakima FatCat and Whispbar Ski Carriers # 8860085 you mention will work with your Yakima Fat Cat 6 Locking Rooftop Ski and Snowboard Carrier # Y03088 (INACTIVE). The difference between # 8860085 and # Y03098 is the primary height at which they sit. The Yakima FatCat 6 will still operate normally, and will all you to channel mount your FatCat 6 into your aero style crossbars like the Yakima JetStream Crossbars # Y00425. For a low profile...
view full answer... - Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy CruzeThe difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
view full answer... - Recommended Roof Rack for a 2023 Kia Niro PHEV We have a set up that will allow you to add crossbars, however I checked with our vendors and did not see a hitch available for the 2023 Kia Niro PHEV and there's no indication that one is coming. Nobody made one for the 2022 either so it's not looking like there's going to be one. To add a set of crossbars to your Kia Niro, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine...
view full answer... - Correct Yakima Roof Rack Fitment for a 2021 Honda PassportTo install a Yakima roof rack on your 2021 Honda Passport you need at least 50" JetStream Crossbars # Y00425 and the TimberLine Towers # Y33TR or the Yakima TimberLine FX Roof Rack # Y78UV that has ore or a clamp style connection as opposed to the straps. If you don't have either of these setups then I can't recommend using an alternative setup even if you're able to get it to fit. A while back we had someone fit a roof rack to a vehicle and while it technically "fit" and stayed put,...
view full answer... - Recommended Roof Rack for a 2024 Hyundai Tucson w/ Flush Mounted Roof Rails Congrats on the new SUV! Yes, there is a way to install a roof rack on your 2024 Hyundai Tucson with rails even though it has the panoramic sunroof. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot RailsFor your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
view full answer... - 2019 Lexus GX 460 Roof Rack Recommendation to Fit Flush Rail Roof StyleI'll be happy to help you find the best roof rack solution for the flush rails on your 2019 Lexus GX 460. For your application I highly recommend the Yakima JetStream roof rack system because it is a high quality system that is built to be versatile and has adjustments in the legs so you know you get the absolute best fit out of the crossbars: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 30 - # Y25ZR Lock Core Kit - # Y07204 (optional) If you let me know what...
view full answer... - Replacement Yakima Towers Needed For Custom Install of Jetstream Cross Bars On A.R.E. TopperYou will need the SkyLine Towers for Yakima Crossbars, # Y53TR for a set of 4 or, # 8880614 for 1 each.
view full answer...
- 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super DutyWe can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
view full answer... - Roof Rack Replacement for OEM Crossbars to Carry Rooftop Tent on 2022 Subaru Outback WagonI'd be more than happy to help! To utilize a rooftop tent, like the Yakima SkyRise HD # Y07437, you'll actually need to remove your factory rack and replace it with an aftermarket kit. I really like the Yakima JetStream roof racks because they are not only great quality, but the legs have adjustments in them to ensure that you get the best fit possible. For this setup you'll need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 27 - # Y46VR Lock...
view full answer... - Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - Recommended Roof Rack for a 2023 Chevy Bolt EUV w/ Side Rails Yes, there is a way to mount a roof rack to the side rails of your 2023 Chevy Bolt EUV. You will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 SkyLine Towers for Yakima Crossbars - Flush Rails, - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 These crossbars have a 165 lbs capacity. The skyline towers and landing pads will attach to your...
view full answer...
- Parts Needed to Install Crossbars on the Yakima 72" HD Tracks for Roof RacksTo install crossbars on the Yakima 72" HD Tracks for Roof Racks # Y84MR you need 2 of the Landing Pad 26 # Y75ZR, the SkyLine Towers # Y53TR, and then your choice of Yakima crossbars. I recommend using the JetStream crossbars like the 50" # Y00425 because they look great, they are durable, and they are made of aluminum so they will last a long time. I like this system because you can adjust the crossbars along the rails to accommodate different accessories you might need on your truck.
view full answer... - Yakima HD Crossbar Rack For Retrax Pro XR Tonneau CoverYou'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
view full answer... - Is The Rhino-Rack Roof Rack For Yakima Tracks Compatible With Yakima HD Tracks Hi Ken, The slots are slightly different between the standard Yakima Tracks (42" # Y01126, 54" # Y01127, 60" # Y01135) and HD Tracks (54" # Y64MR, 60" # Y74MR, 72" # Y84MR) so the Rhino-Rack Roof Rack for Thule and Yakima Tracks # Y01-140B-NT would not be compatible with the HD Tracks. If you haven't gotten the Tracks yet then you'll want to go with the standards options. If you already have Yakima HD tracks then you'll need the following components: Landing Pad 26 # Y75ZR (x2) SkyLine...
view full answer... - Roof Rack For 2016 Honda Pilot For Two Thule HullavatorsI am going to assume your 2016 Honda Pilot has flush side rails and that you can remove your factory roof rack, and if so there is a way to use a pair of the Thule Hullavator Pro # TH898, but the ShowDown is far too wide to put on next to the Hullavator. If you're okay using a pair of Hullavators, the roof rack you need for your '16 Pilot is the following, from Yakima: - Yakima JetStream Crossbars # Y00426 - SkyLine Towers # Y53TR - Landing Pad 19 # Y00245 You can lock the roof rack...
view full answer... - What is the Difference Between Yakima HD Tracks and Regular Yakima Tracks?The difference between the Yakima HD Crossbars like the # Y74MR and the regular Yakima Tracks like the # Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD system, or OutPost HD systems. In order to use these components, you need to use the Landing Pad 26 for Yakima SkyLine Towers - Qty 2 # Y75ZR or the Yakima HD Track Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Racks - Qty 4 # Y75RR....
view full answer... - 2022 Toyota Highlander Roof Rack Recommendation for Flush Rails on RoofThe roof rack that fits the flush rails on your 2022 Toyota Highlander is from Yakima and uses their Landing Pad 28: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 28 - # Y66VR Lock Core Kit - # Y07204 (optional) Attached is an installation video of this roof rack on a 2021 Highlander for you to check out. If you let me know what you plan on using the roof rack for I'd be more than happy to make some additional recommendations.
view full answer... - How to Attach a Yakima Roof Rack to a 2019 Lexus GX460 w/ Flush Side Rails Thanks for the picture! The Landing Pad 30 for Yakima SkyLine And Control Towers item # Y25ZR attach directly to the factory flush rails. You won't have to remove you rails. You will also need the following parts to finish out your roof rack: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SkyLine Towers for Yakima Crossbars - Flush Rails - Qty 4 item # Y53TR
view full answer... - Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
view full answer... - What Yakima Landing Pad Do I Need For My 2021 Subaru OutbackYour 2021 Subaru Outback Wagon needs Yakima Landing Pad 27 for Yakima SkyLine And Control Towers - Qty 4, part # Y46VR. This Landing Pad provides the mounting points for your Yakima Skyline or Control towers. If you are using the SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4,part # Y53TR, you need to make sure you are using the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03536....
view full answer... - What Roof Rack Fits My Flush Rails on My 2022 Chevy Bolt EUV?Thanks so much for the photos! I can see how you might be confused. I went ahead and confirmed with Yakima that these rails are considered flush rails with fixed mounting points on your 2022 Chevy Bolt EUV. For a great roof rack system for your setup, I recommend the following parts: - Yakima JetStream Crossbars - Aluminum - Black - 50" # Y00425 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR - Landing Pad 19 # Y00245 - Yakima Same-Key...
view full answer... - 2021 Jeep Grand Cherokee L Yakima Roof Rack for Flush RailsI'd be more than happy to help out! The parts you need to get the Yakima JetStream roof rack installed on your 2021 Jeep Grand Cherokee L flush rails include the following: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) This gives you the exact parts that were used in the linked video. If you let me know what you are planning on using this roof rack for I'd be more than happy to make a recommendation for you!
view full answer... - Roof Rack for Installing Two Thule Hullavator Kayak Carriers on Roof of 2020 Toyota RAV4By '4 Hullavators', I'm assuming you're meaning two sets which would allow you to carry two kayaks. Installing 2 Hullavators for carrying two kayaks will be a tight squeeze on the roof of a RAV4. You'll also need to keep in mind that each set of Hullavators weighs about 40 lbs, and most roof rack setups have a capacity of 165 lbs. This leaves you 80-85 lbs of capacity for the 2 kayaks in order to not overload the roof rack. If the combined weight of your Kayaks is less than 85 lbs, you...
view full answer... - Height of Yakima & Thule Roof Racks on 2022 Jeep Grand Cherokee 4xeThe Thule roof rack for your 2022 Jeep Grand Cherokee 4xe will add about 4 inches and the Yakima roof rack will add about 4-1/2 inches of height to your vehicle. Here is what you need for either rack: Thule - Thule WingBar Evo Crossbars - Silver # TH711200 or Black # TH711220 - Evo Flush Rail Feet for Thule Crossbars # TH710601 - Fit Kit for Thule Evo Flush Roof Rack Feet # TH68FE - (Optional): Thule One-Key System Lock Cylinders # TH450400 Yakima - Yakima JetStream Crossbars - Silver...
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - What Roof Rack Can I Use with the Thule Hullavator on My 2022 Toyota Highlander with Flush Rails?I have a great solution for your flush rails on your 2022 Toyota Highlander to use the Hullavator # TH898. Yakima temporarily discontinued the Y00148 because they are updating the feet to fit a wider range of vehicles. Yakima has been changing a lot of fitments lately because of this factor. The landing pads # Y66VR are separate from the Y00148. However, with that being said, Yakima does have a roof rack system that fits your flush rails with a different model of feet. For that system,...
view full answer... - Roof Rack For 2022 Lexus GX 460 For Thule HullavatorSure thing, we can get your 2022 Lexus GX 460 set up with a roof rack for your Thule Hullavator # TH898, and what you'll need is a rack from Yakima. The correct parts for your Lexus are the following: - Yakima JetStream Crossbars - Silver # Y00429 or Black # Y00426 - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 30 # Y25ZR I also recommend adding locks to protect your roof rack, keeping it secure on your Lexus. You can add those with the Yakima Same Key System (SKS) Lock...
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Yakima Landing Pad Recommendation for 2002 Honda CR-VI checked with Yakima and for your 2002 Honda CR-V the recommended Landing Pad is the number 8 # Y00228.
view full answer... - Roof Rack Needed to Carry Roof Box, Bike Rack, and Kayak on a 2006 Honda PilotOut of the Yakima and Thule options for the naked roof on your 2006 Honda CR-V I recommend going with Yakima. The Thule options have bars that end inside the foot packs. This gives the roof rack a great OEM look but minimizes the amount of crossbar space that can be used. To use a JetStream aero bar roof rack on your CR-V you will need the JetStream bars, part # Y00425, along with the SkyLine Towers # Y53TR, and the Landing Pad 8 # Y00228. If you would like to add locks to this roof rack...
view full answer... - Lubricant Use on Screw Threads of the Yakima Landing Pad 8 # Y00228I totally understand the concern! When it comes to manufacturer's guidelines, it is always recommended to go "by the book." This is because Yakima puts all of their parts like the Landing Pad 8 for Yakima SkyLine and Control Towers # Y00228 through strenuous physical testing. It is also important to note that not going by the recommendations may void any warranty on the roof rack. With that being said, you are absolutely correct that Yakima recommends using a non-water soluble lubricant...
view full answer... - Yakima Roof Rack Recommendation for 2004 Honda CR-V to Carry KayaksFor your 2004 Honda CR-V the correct parts needed to install a Yakima roof rack are # Y00408, # Y53TR, # Y03536, and # Y00228 which will give you a round bar roof rack. Once that's installed you'd be able to install a Yakima JayLow kayak carrier part # Y04073 which is a really solid option for a carrier. It is padded and can fold down when not in use plus is very easy to install and use.
view full answer... - Recommended Roof Rack System For Yakima Round Bars On 2006 Honda CR-VI reached out to my contact at Yakima and there are not Q clips available for your 2006 Honda CR-V so your Q towers will not be compatible. That model has fixed points in the roof and so their recommendation is the Skyline Towers # Y53TR and Landing pads # Y00228 which you will need a quantity of 2 kits for 4 pads total. To use these with round bars like you have, you will also need the round bar adapter # Y03536. Their recommended cross bar length for this rack on your vehicle is 48...
view full answer... - Parts Needed to Transfer Yakima Round Crossbars from 2006 to 2010 Honda CR-V The correct Round CrossBars for Yakima Roof Rack System for a 2010 Honda CR-V consists of part # Y00408, part # Y53TR, part # Y03536, and part # Y00228. It looks like you already have the crossbars but everything else would need to be replaced (part # Y53TR, part # Y03536, part # Y00228). The design of the mounting feet has changed so you will need to update yours to the new style. The mounting feet come with a tool you can use to remove the old and install the new.
view full answer...
- Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota HighlanderAs long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles. To add the Yakima Round...
view full answer... - Parts Needed to Install Yakima Round Crossbars on a 2006 Honda CR-VThe Yakima RailRiders are a very old style of roof rack that hasn't been around in a long enough time that there are no landing pad or any fit info available. If you have a set of round Yakima crossbars like the part # Y00408 you can reuse them but you have to go with the current Yakima towers etc. For that you'd also need the part numbers # Y53TR, # Y03536, and # Y00228.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Yakima Landing Pad Recommendation for 2002 Honda CR-VI checked with Yakima and for your 2002 Honda CR-V the recommended Landing Pad is the number 8 # Y00228.
view full answer... - Roof Rack Needed to Carry Roof Box, Bike Rack, and Kayak on a 2006 Honda PilotOut of the Yakima and Thule options for the naked roof on your 2006 Honda CR-V I recommend going with Yakima. The Thule options have bars that end inside the foot packs. This gives the roof rack a great OEM look but minimizes the amount of crossbar space that can be used. To use a JetStream aero bar roof rack on your CR-V you will need the JetStream bars, part # Y00425, along with the SkyLine Towers # Y53TR, and the Landing Pad 8 # Y00228. If you would like to add locks to this roof rack...
view full answer... - Lubricant Use on Screw Threads of the Yakima Landing Pad 8 # Y00228I totally understand the concern! When it comes to manufacturer's guidelines, it is always recommended to go "by the book." This is because Yakima puts all of their parts like the Landing Pad 8 for Yakima SkyLine and Control Towers # Y00228 through strenuous physical testing. It is also important to note that not going by the recommendations may void any warranty on the roof rack. With that being said, you are absolutely correct that Yakima recommends using a non-water soluble lubricant...
view full answer... - Yakima Roof Rack Recommendation for 2004 Honda CR-V to Carry KayaksFor your 2004 Honda CR-V the correct parts needed to install a Yakima roof rack are # Y00408, # Y53TR, # Y03536, and # Y00228 which will give you a round bar roof rack. Once that's installed you'd be able to install a Yakima JayLow kayak carrier part # Y04073 which is a really solid option for a carrier. It is padded and can fold down when not in use plus is very easy to install and use.
view full answer... - Recommended Roof Rack System For Yakima Round Bars On 2006 Honda CR-VI reached out to my contact at Yakima and there are not Q clips available for your 2006 Honda CR-V so your Q towers will not be compatible. That model has fixed points in the roof and so their recommendation is the Skyline Towers # Y53TR and Landing pads # Y00228 which you will need a quantity of 2 kits for 4 pads total. To use these with round bars like you have, you will also need the round bar adapter # Y03536. Their recommended cross bar length for this rack on your vehicle is 48...
view full answer... - Parts Needed to Transfer Yakima Round Crossbars from 2006 to 2010 Honda CR-V The correct Round CrossBars for Yakima Roof Rack System for a 2010 Honda CR-V consists of part # Y00408, part # Y53TR, part # Y03536, and part # Y00228. It looks like you already have the crossbars but everything else would need to be replaced (part # Y53TR, part # Y03536, part # Y00228). The design of the mounting feet has changed so you will need to update yours to the new style. The mounting feet come with a tool you can use to remove the old and install the new.
view full answer... - Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota HighlanderAs long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles. To add the Yakima Round...
view full answer... - Parts Needed to Install Yakima Round Crossbars on a 2006 Honda CR-VThe Yakima RailRiders are a very old style of roof rack that hasn't been around in a long enough time that there are no landing pad or any fit info available. If you have a set of round Yakima crossbars like the part # Y00408 you can reuse them but you have to go with the current Yakima towers etc. For that you'd also need the part numbers # Y53TR, # Y03536, and # Y00228.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.