Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Thule WingBar Evo Crossbars 60" - Black - Aluminum - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Colin: Hey, everyone. It's Colin here at etrailer.com. Today, we have a 2019 Ford F-150, and we're going to do a test fit of the Thule Wingbar Evo roof rack system.Now, we have the black color on top of our F-150 right now, but it are also available in silver. You can find that here at etrailer.com.This is designed to mount to your naked roof of the F-150, and it's just a nice accessory for your truck. It's going to allow you to get your favorite accessories on your roof, whether you've got a kayak carrier, a cargo box, or even a bike rack.Now, our roof rack's going to be comprised of a couple different parts. Up top, we're going to have our 60 inch long Evo Wingbars, and these Wingbars do have a nice aerodynamic shape to them.
It's going to help cut down on wind noise and drag when you compare it to your standard square or round bar roof rack system.We're also going to have a T slot up top right here so you can utilize T track accessories while you're using this roof rack. How you utilize that T track is you just flip open the end cap. Now you have access into that T track. Rather than having to pull out the rubber strip and cut it to length for your accessory, you just simply slid it into the two strips right there. When you've got it in there, just tighten it down and the close your end cap.Now, kind of the middle man of our roof rack system is going to be the Evo clamp feet.
Now, these are going to be for naked roofs. We'll pull off the end cap so you can see what's inside. It's basically going to be holding our fit kit and it's going to be how we tighten down our cross bars to our roof.Below here, we're going to see this thick rubber pad and this rubber coated hook. That's going to be our fit kit, which is specifically designed for our F-150. The rubber coating on the hook and the thick rubber pad aren't going to harm or scratch the finish of your paint.
Then once they're connected to the foot, there's a bolt inside we tighten down so it's secure on our roof. I'll put this end cap back on. You're also going to see that we have these plastic pop locks which we can replace with Thule lock cores, which are sold separately here at etrailer.com. That'll just give a more secure look to your roof rack. It's going to make sure no one can remove it without that key.Now, I want to go over a few measurements for you guys.
First, we're going to measure from the top of our roof to the bottom of our Wingbar, which is going to be two and a quarter inches. That's more than enough space to be able to get your clamp on accessories under the crossbar without harming the finish of your roof. Now, it's also enough space that if you have a sunroof on our F-150, you're going to be able to open that up without any interference.Now, from the top of our roof to the top of our Wingbar, it's going to be three and a half inches, which that's relevant because you want to make sure for any low clearance situations, you know that you've added that much to your rooftop.Now, we're also going to have a 220 pound weight capacity for our roof rack system, which is a step up from their old load bar system. It's going to be more than enough weight to be able to get your favorite accessories on top whether you got a cargo box or a bike rack and get that stuff loaded up.Now we'll go ahead and show you how to get it installed. There is a little bit of pre assembly you have to do before you get it on your roof. Now, we already have the front crossbar installed. The second one is going to assemble and install the exact same way. We're going to flip our 60 inch Wingbar over. What we're going to do is grab is Evo foot. We're going to take the rubber pad from our fit kit and clamp it on. You can see kind of how that bracket, that plastic bracket, is shaped just like that, so we're going to put that on. Now, you're just going to have to push down, get it to clamp on to that plastic bracket. Just make sure it's tight all the way around. Try to give it a couple pulls on each side. It's on there.Now, we're going to grab the rubber coated hook from our fit kit and we're going to push up until you hear a click, then it's going to be locked in place. Right there. Tug on it a little bit, make sure it's tight.Now, we're going to come to the side of our Wingbar, pull off the end cap. You're going to have to push down, get that end up off like so. We already have our scale set to the number specified in our instructions. There's going to be a number system right here, going down to a half. Once you get it set to there, we're going to push in on the two silver buttons on the inside. It's going to unlock the clamp up top. Once you've pushed down, it's going to unlock, and we can feed it through the channel right here. We're going to go forward until it touches the end of that scale. Just go, then once we have it touching, just let go of those buttons and it's going to be locked in place.Now, we'll throw our end cap on, and now we can put it on our roof.Now we're going to measure from the front of our front Wingbar to the front of our rear Wingbar. Just hold our tape up there. This measurement you can find in your instructions. I'm going to have to scoot it this way a bit. Here we go. Just make sure you measure on both sides, and it doesn't hurt to go in and double check and make sure that it's correct before you tighten down.Now we're going to begin tightening down our roof rack with our included tool. We're going to start on this side. We're only going to do a couple rotations at first, and then we're going to switch sides and do the same amount of rotations. We do that to make sure you can get an even pull on both sides. There's going to be a bolt on the inside right there. I'm just going to insert our tool and then, like I said, just give it a few rotations. Now, go to the other side and continue to go back and forth until it is fully tightened down.Now, once you hear those audible clicks right there, you know that it is torqued down to Thule's specifications. We've already done the other side as well, so now we know our roof rack is secure. I'm just going to put the end caps on both sides. I'm going to close our doors.Now, it's not a bad idea to go ahead and just give it a quick shake test. Just grab both sides and give it a shake. You see that the whole vehicle is moving, so we're good to hit the road.Thank you all for watching. That's going to do it for our test fit of the Thule Wingbar Evo roof rack system on our 2019 Ford F-150.
Average Customer Rating: 4.7 out of 5 stars (638 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
I've had the roof rack for a year now and we only use it sporadically in the winter to put the ski box ontop of the car but it works great. Very easy to install and remove and very sturdy. Previously I had the kind that bolted into the roof of my SUV and had a terrible experience with that (we lost the rack and kayaks on the freeway and it tore holes in my roof). The clamp style is the only kind we'll get from now on because they are much sturdier and no risk of losing them. Definitely recommend them.
Quality product, fast shipping, install was a breeze. Glad to have shopped etrailer.
Very sturdy. Works well. The attachment to the roof rails on my 2023 chevy suburban works well. The "C" clamp design mechanism holds it tightly and securely in place. No fear of anything coming loose and falling off like other racks I have tried to use.
Easy to fit into the feet that are sold separately. No clue why the rubber strip just can't come already attached but it only takes a minute or two to put them on. Make sure before tightening the feet, the bars are even.
I just got my packages and had it installed within the hour very satisfied
No problems installing. The rack is doing fine.
Product was right fit for my vehicle and installed perfectly. Etrailer was knowledgeable and got the goods to me quickly. Enjoyed working with them and will again.
Product was right fit for my vehicle and installed perfectly. Etrailer was knowledgeable and got the goods to me quickly. Enjoyed working with them and will again.
Favorite bar Thule makes. Super solid.
Easy install. Seem to be working great. Installation was easy. No drilling or any modifications to the truck.
Easy to install, fit and finish are top notch.
I've owned this roof rack for a year now, and it has served my purposes (carrying my kayak around on my truck) quite well. It was fairly easy to assemble, largely because the entire instruction guide was in pictures.
I have had to retighten the rack a couple of times since putting it on the roof, so I tie the kayak down to the front and back of the truck as well as to the roof rack. I suspect the ocean kayak puts a bit of lift on the roof rack resulting in the loosening.
Worked perfectly on my 2020 GMC Sierra. Looks and works great.
Austin was exceptionally helpful.
I got my packages today and had it installed within the hour looks great very satisfied
I have almost always had roof rails on my vehicles. My F150 had no rails and I was nervous about clamp style rack holders given what I tend to carry on top. These have been great and I am positive I have overloaded them numerous times.
Perfect fit
Works as advertised. A little wind noise, but not much.
Great quality products! Easy installation with properly guided instructions. One of the best tracking information, from ordering to delivery. Would strongly recommend etrailer to anyone looking for roof or hitch bike racks.
I just installed these on my 2015 Odyssey's side rails.
Easy-peasy to install and appears to be quite solid.
Just not sure how tight I need to screw them.
It only took me 30 minutes to assemble and install the Crossroad feet with the 60" WingBar EVO. It will probably take me 10 minutes to move to another vehicle.
I chose the Crossroads for the ease of installation so I can switch them between our two Odysseys. When loosened for removal they also loosen the crossbar (60" WingBar EVO) which makes it so much easier to switch to a vehicle with a different width requirement.
Fits that requirement perfectly.
Will be loading the canoe on top this coming weekend. Looking forward to using these.
The whole experience was freakin awesome.
* Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU!
* The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed.
* We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes.
* It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go.
Great job etrailer, I would definitely buy more products from your organization!!
Easy to install with the anchors and crossbars, and still holding up great a year later.
Excellent system
Like the product fits really well and easily installed. Bad part is it makes a lot of noise when going down the road. Would like to know what to do to get it quieter when going down the highway. Thanks.
The product quality seems great, and fit my Jeep Wrangler without having to do any drilling, or semi-permanent mounting of overly obtrusive cage type rack system. Tried mounting my Kayak on top and it seems like it's going to work for what I wanted it for. I especially like the fact that I can easily take the whole system off with ease as I would typically leave it on only in the summer.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.