To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Black:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today in our 2016 Acura MDX, we'll be taking a look at and showing you how to install the Yakima roof rack system. This is going to consist of part numbers Y00426, those are going to be our Yakima JetStream crossbars, part number Y00146, those are our BaseLine towers, and part numbers Y06150, and Y06105. Those will be our BaseClip fit kits for our Acura MDX.The Yakima roof rack system is a great solution for carrying your vehicle accessories on your vehicle's naked roof, whether those are bike racks, cargo baskets, or ski and snowboard carriers. The Yakima JetStream crossbars are an aerodynamic crossbar that's going to help to reduce wind noise and drag.If we remove our end cap, you'll see our weather strip on the inside. This can easily be pushed down and used with channel-mounted accessories. So you don't have to worry about taking our weather strip out, or cutting it down.
Our Yakima BaseLine towers have a option to knock out this plastic portion here, and insert the same key system lock cores. That's going to allow us to prevent theft and tampering.When we remove our cover, you can see all the pieces that we need to use, and we have an included tool that's going to help to work down all of our bolts. The Yakima fit kit is going to be made specifically for our vehicle, which will give it a nice secure fit. It's also going to have rubber on any portion that might touch our vehicle, which will help to prevent scratches or abrasions.These bars measure 60 inches long, and the entire system has a 165-pound weight capacity, and a limited lifetime warranty. Now that we've gone over some features, we're going to show you how to get this installed.
I've gone ahead and put together one half of our crossbar. We're going to show you how to put together the rest, but everything you see here on our table is what's included.We're going to have our two covers for our BaseLine towers. We've got our BaseLine tower here. We've got our fit kit. This is going to be the two clamps that we'll use, the pad that we use for our fit kit as well, our end cap cover for our crossbar, our adapters for our crossbar, our included torque tool, and we've provided our own flat tape measure.To start off, we'll take our BaseLine tower.
We're going to take the plastic portion of our adapter, and we're going to secure that end to the top of our tower. That will snap right in. You want to make sure you hear those clicks. That's when we know we have it secure. We'll next take the metal portion.
We're going to place it right in the center. Holding it in place, we're going to flip our tower over.Inside you'll see two bolts. We're going to go for the one further back here. We'll take our included tool, and start to tighten that down. We want to make sure that the metal portion is even with the two plastic pieces on the top. The last thing we do before we actually load up our tower is we're going to take our pad, making sure that our arrow faces out, and we're going to snap it onto our tower. Again, you'll hear those audible clicks.Now, we've gone ahead and removed the weather strip on the underside of our crossbar. We want to remove this, and we can cut it down, and fit it in between our towers and on the outside edge between our towers and our crossbar end caps. That's going to help to reduce wind noise and drag, and any kind of whistling sound that might happen, but for demonstration purposes today, we're not going to use that.To load our tower onto our crossbar, we're going to line up the bottom portion that we installed into our channel here at the bottom. Now, you may need to loosen up that piece in the center, just slide our tower onto our crossbar, and we're going to set this at 42 and 3/8 inches. With that in place, we'll take our tool and tighten that down. Now we're ready to load this up onto our vehicle.We'll take our crossbar. We're going to set it on our roof. We'll just try and set it as evenly as possible. Now we'll take our crossbar end cap, and place that on, and we can measure out our crossbar spread. We'll measure out our crossbar spread. It'll be from the center of our front tower to the center of our back. That's going to be 32 inches. We do want to make sure that we move our crossbar evenly on each side.With that in place, we'll open up our doors. We want to lift up the cover here. We're going to insert our clamp, and make sure it attaches to our long bolt on the inside. We can start to tighten that down using our included tool, tightening up our bolt. You just want to make sure that that sits on our doorjamb, and we'll do the same thing to the other side.Once we hear the click of our tool, we'll know we have enough torque behind our bolt. Ready to close up our doors. Close up the gray cover here, and place on our tower covers. We'll fit on our bottom hooks first, and click it into place. Now we're ready to load up our accessories and hit the road. That's going to be our completed look at the Yakima roof rack system for our 2016 Acura MDX.
Average Customer Rating: 4.7 out of 5 stars (190 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Follow the instructions, and you can't go wrong on the self installation
product was just what I needed The folks at etrailer were extremely helpufl!!
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Love it! We've made several long trips with full luggage loads.
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
Well packaged and on time
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
Great product fast shipping
Great! Easy to install!
Great service and great staff. They will have all the technical information you need.
Solid build quality and easy installation on my '21 Mazda CX-5.
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
SIMPLE & EASY1
One year later and everything works well. I had a problem early on where the rubber protection for one of the j clips from the base towers came off. Contacted etrailer and they sent me a whole new assembly direct from Yakima. Thanks for the prompt response and service!
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.