Bargman 12V RV Dome Light - Single - 7-5/16" Long x 4-3/8" Wide - White Housing

Video Transcript for Bargman RV Lighting - Ceiling Light - 30-76-123 Review

Speaker 1: Today we're taking a look at the Bargeman interior light with the built-in switch. This interior light is perfect for your camper or enclosed trailer. It is approved for ceiling and wall mounting applications and it is designed for 12-volt power applications. The nice diffused lens actually gives a wider viewing angle compared to standard clear lenses, and this light contains one incandescent bulb that can easily be replaced when needed. All you have to do is remove the lens, so you slide it out, and then lift it up, and then this bulb right here is a 921 bulb. It is included.

You'll also notice that removing the lens is how you gain access to the mount holes as well. And then it just snaps back into place.Right here is the integrated on and off switch. It offers very simple and easy operation. The unit contains or features a white polypropylene base. It's very strong and durable, looks really nice.

When it comes to the wiring, it's a two-wire design, so your white wire is for your ground connection and black wire is for the 12-volt power connection. It's a surface mount installation, so it mounts directly at the surface, just like that. Mounting hardware is not included, but again, you can gain access to the mount holes by removing the lens, and it simply removes by sliding it off.A few measurements to go over with you real quick, and then we'll hook it up to power so you can see what it looks like. The overall width at the widest point, which is right here, that gives us a measurement of about 4 3/7 inches wide. Overall length from very back to very front, that measures around 7 5/16 of an inch long, and the overall thickness or the depth from the bottom to the very top at the thickest point is about 1 3/4 inches thick.

Now when it comes to the mount holes, these two right here are separated on center by 2 3/8 inches. These right here are separated on center by 2 3/4 inches, and then from back to front, they're separated on center by about 2 1/4 inches.We're gonna go ahead and hook it up to power. That way you can see what it looks like with some power running to it. We'll also be able to turn off our overhead lights so you can see it in a lower light setting. So you can see here that the light sends out a nice consistent signal.

Again, it contains one incandescent bulb, and that diffuse lens really helps provide that wider viewing angle. And then the on and off switch is easily accessible and allows you to easily operate the on and off functions of the light.And that's gonna do it for today's look at the Bargeman interior light with the built-in switch.