Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Clean all that tough food residue off your plates using the pull-out head on this kitchen faucet. Ceramic disc cartridge prevents the faucet from dripping. Standard-flow aerator provides water pressure needed to wash your dishes more thoroughly.
Features:
Specs:
Tackle that food caked onto your plates from all angles with the pull-out head. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose.
This faucet lets you upgrade the kitchen faucet in your RV or camper. Depending on your setup, this faucet can have either a 1-hole installation using the round deck plate or a 3-hole installation using the oval deck plate and included hardware. Using the brass inlet shank with polymer lining, drop the new faucet and deck plate in place of your existing faucet. Hand-tighten 2 of the mounting nuts onto the screws, and thread the washers and other mounting nut onto the inlet shank. Then connect the pull-out head hose to the center of the faucet body. Finally, install the hose weight and connect the hot and cold water lines. The use of tub and tile caulk (not included) is required.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucet's single handle RV kitchen faucet with a pull-out sprayer. This unit is designed to add or replace a kitchen faucet in your RV. It's made from a completely lead-free design. It's going to feature the single handle lever that gives the unit a really nice look. It's very easy to control and to operate. It's got the red and blue indicator, right here, to indicate hot and cold.
It does have a pull-out spray nozzle. It's going to come with a 59-inch long hose that would simply attach to . It would go up through the stem, through the housing, out this portion here, and then one end would connect to the actual nozzle. The other end of the hose would feed out the main shank, right here, loop back to itself and connect at this point. It does come with a washer, right there, that you can install in there. It's a rubber washer for leak-proof performance.
Then those two pieces just thread together. That hose loops back and connect there, 59-inch long hose. It does come with a metal weight. This would get attached to the hose, and that's going to allow the hose to easily retract back into the faucet housing when it's not being used. This weight simply clamps around the hose.
Hardware to get that done is provided. It does feature the easy-to-use nozzle controls. That's right here. These are going to allow you to easily switch between regular faucet flow and spray. You can see there that it does feature a low-flow aerator to help reduce wasting water. It's going to come with all the necessary mounting hardware. It's going to come with your deck plates as well.
Now this one is going to come with two different deck plates. You have this one, right here, which would be for a three-hole mounting option. Then you have this one, right here, which would be for a single-hole mounting option. The deck plates go on top of the mounting surface, but sit at the base of the faucet. Give it a really nice, clean, finished look. Again, with this unit, both options are available with the faucet. It's going to come with the necessary hardware for either option. That's two different style bases. If using a three-hole mounting option, the two outer slots, or the two outer holes, mount locations are going to need to be separated on-center by around eight inches. This is your backend plate, and then you have that finishing piece that goes over to give it a nice, clean, look. This unit is going to feature a hybrid construction. What that means is that the unit is constructed of both plastic components and metal components. It makes it lightweight, but still gives it the feel of a fully metal faucet. Overall, it's just a lot more stronger, a lot more durable. It's going to be a great addition or a replacement to your RV, or to whatever it is that you want to use this for, whatever kitchen that you want to use this for. Really nice design. It's going to feature a rubbed bronze finish. The unit's going to feature a ceramic disk valve, or cartridge. Talking about the hoses, here again, the short one we covered, that's going to connect back to the hose that goes to the pull-out spray nozzle. Then you're going to have your hot and cold water line connectors. The cold one is labeled cold. That way you know that that one is for cold. The other one would be for your hot water. The shank length, right here, this portion is going to measure about 2 3/8 of an inch long. The diameter of that shank is around 1 5/16 of an inch. This base has a front to back measurement of around 2 3/4 of an inch, with a length measurement edge to edge of 10 1/4. The other base is going to have a diameter of 2 3/4 of an inch. There are a few measurements that I did just to help guide your decision. From the center of where the faucet mounts to the center of where water comes out, straight line measurement is about 8 1/2 inches. From the counter top, or the bottom of the mounting surface, or top of the mounting surface to the tallest point of the handle which is the tallest point of the faucet, that's going to measure around 9 inches. From the counter top going straight up to the closest point where water comes out, that's going to be about 6 inches. Just want to talk about some of the components, right here, that it comes with. Again, we covered the metal weight. This is the piece that gets installed on the underside of the mounting surface, gets threaded onto the main shank, right there. It's going to come with the appropriate washers, seals. These two pieces, right here, these two bolts go down in these slots. That's going to be for that three-hole mounting option. Then it's going to come with the plastic inaudible 00:04:32 mounting go on the underside of the mounting location and secure to those bolts for a nice tight, secure, fit. That's going to do for today's look at the Phoenix Faucet's single handle RV kitchen faucet with the pull-out sprayer.
Average Customer Rating: 4.8 out of 5 stars (280 Customer Reviews)
Clean all that tough food residue off your plates using the pull-out head on this kitchen faucet. Ceramic disc cartridge prevents the faucet from dripping. Standard-flow aerator provides water pressure needed to wash your dishes more thoroughly.First, great service! I ordered on Tues afternoon & received the faucet Fri morning. The faucet was very easy to install, with a Phillips head screwdriver and a small wrench. The instructions were easy to follow, I removed the old and installed the one in about 30 minutes. The old faucet in our RV would spin around during travel & the handle would bounce open. The one time we forgot to turn off the water pump we had a minor flood! That was the last straw with that faucet. This new one will not have those issues, a much better design.
I am extremely pleased with this faucet, which I installed in my RV to replace an outdated, two-handle OEM faucet. What an improvement! The quality is excellent. I planned to order an all-metal faucet an was initially a bit reluctant about the hybrid (plastic/metal) construction, but that's not an issue at all. The plastic parts are heavy resin and extremely durable. An added advantage is that the bronze color is molded in, so it won't scratch or wear off like the "painted on" bronze finish applied to metal. WAY better than my all-metal old faucet, whose finish showed wear after very little use. I had to drill a center hole to install the new faucet, but that was easy. It comes with a cover plate to use if your current faucet is two-hole like mine, but can be used without the plate if you have one hole. Overall installation wasn't difficult and it matched my current bronze cabinet hardware beautifully (as the photos show)! I'm so pleased that I'll probably order a matching one for the bathroom sink!
Supply lines are too short to reach any of the water supply. Now I have to go spend $[XX] to make extensions so this faucet would work.
Terrible design and not sure how many RVs this would actually fit?
Product shipped promptly as advertised.
Great replacement for truck camper sink. The faucet works good and looks very nice.
Excellent Product. Good and solid build. Looks very nice in a big RV. Installation easy without any problems. Ordering and shipping worked perfectly.
Markus D.
12/12/2020
Works as intended. Like the product. Only small downside is that it is hard to adjust to a very small dripple of water flow only
Our old kitchen faucet wasn't performing well so we went in search of a new one to upgrade what we had. I was impressed with the amount of detail etrailer had on their faucet offering. We selected this one. I installed it three days ago and both my wife and I are somewhat embarrassed with how much we love this faucet. It came as advertised and we couldn't be more pleased. This is the first time we dealt with etrailer... we will be back!
Thanks
I really like the faucet I purchased to replace the one that broke in my trailer the color is perfect and the handheld sprayer is very easy to use just like the one you would find in your home. I would highly recommend this faucet from etrailer.com
Excellent replacement for original faucet that started to leak. Matched the existing hardware in trailer and functioned much better. Was definitely worth time and money. Would do the same again if needed in future trailer.
have since traded trailer, but faucet was still functioning great and looked very nice.
Perfect fit, easy to install, and everything was in the box needed for the installation. Quality of faucet is very good
Awesome product and the shipping was amazing. Tammie P was great with customer service.
We upgraded our kitchen in our RV. This faucet is a great addition. It works is very well, we enjoy all the features and the nickel finish finishes it off nicely.
Appears to be a good quality unit and looks good in the RV. Installation went well other than the usual body contortions required. Thank you.
We replaced our travel trailer sink with this Phoenix Faucet from etrailer. I am happy to say that it fits perfectly and is still working great a year later. Etrailer.com has outstanding customer service and stands behind their products. I highly recommend them.
The new faucet arrived on time and was very easy to install. It looks great and works well.
Easy to install, looks and works great. Couldn't be happier.
Nice sink faucet and fast shipping. Was very easy to install.
Replaced the faucet in our RV. Perfect fit!
This faucet replaced the original faucet in our 5th wheel. It is well made and very easy to install. The manufacturer thought of the DIYer when they designed this faucet and included the tool to help tighten the nut. We were concerned about the height of the faucet but the pictures and video review provided by etrailer answered all our questions before we made our purchase. We originally were looking at Item PF231541 which more resembled the original faucet but etrailer's sales technique of showing economy, value and premium alternatives including the difference in price led us to this faucet and I am glad they did. We will be looking to etrailer for more RV products.
We have been using this faucet for a year now and it has worked flawlessly. Very simple installation. No leaks or drips. highly recommended. Looks great too!!
It fit in my cedar creek forest river perfect. Fixed the leaking faucet valve and it's a much nicer faucet than I had.
Much better than the original kitchen faucet in our Keystone Raptor 410LEV and so much more attractive than the other ones with the coil around the stem. Still looks good and functions great one year after installation. Highly recommended!
Ordered this up to replace one in our trailer. Shipped via mail to Canada for a cost and was able to install as a direct replacement in about 1/2 an hour. Same fittings etc, easy to do. Remember all prices are in USD so factor that in on your cost to Canada.
Easy installation. Looks very nice and works great.
I had an issue with my original order but explained things to Malissa and she was most helpful and wonderful to talk to and work with. She rushed me the Phoenix faucet shown in attachment and absolutely love it. Just the right size, looks great and works even better.
As you can see, faucet is installed and we ready for our trip.
Thanks Malissa and everyone at etrailer.com.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Susan C.
3/24/2021
This faucet is perfect, no issues, and it was so easy to install!