Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, maple finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e24CR, e84CR) and a dual leg kit (e78BR, and e98BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water. The color of trim matches the rest of the tabletop, which gives you a clean, seamless look.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement etrailer forty-two inch by thirty inch maple wood RV dinette table. Now this part'll replace or upgrade the table top on your etrailer RV dinette table, or it can be used with other dinette brands of the same size. It is designed to work as a direct replacement for the etrailer dining tables, part number E37CR and E57CR. Both of those tables we do sell separate on our website. Now this part is just for the table top.
This does require one or two table leg kits for a complete setup. Now those leg kits we do sell separate on our website, they are listed on this product page as a related product. If you do the flush mount table leg, it's part number E69RR. If you do the surface mount table leg, it's E79RR. Now, this is a nice, ultra strong, high density EPS foam tabletop core.
Ensures durability and stability. Has a nice maple wood grain laminate to provide the perfect accent color for existing decor. And I did want to talk about the banding on the edge of this. If we zoom in, you can see it is a- also a maple wood grain banding. But what's nice about this banding, it's an edge banding, goes all the way around the outer edge, it helps reinforce the table sides, and it seals moisture out, prevents the table top from any peeling, cracking, or warping.
Now, on the underside of this table, let me flip it over, and when we flip it over, the first thing you'll notice is the three large circles. And what those circles indicate is where the internal screw plate is located on the inside of this table, right where each one of these circles is, they have a screw plate on the inside that the mounting leg will attach to. This assists with screw retention when attaching your table legs. And when you attach one leg, you'll put it right in the center, that's what those center circles are. If you do two legs, you'll do the two outer circles.
And again, it's the circle is the same size as the flange plate on your table leg. So you'll just line up the circle with this circle, put the screws in, and you're all ready to go. Now this part is made in the USA. Again, the specs on this, the dimension lengthwise, end-to-end is forty-two inches long, width, thirty inches wide, and the thickness, it's right at one-and-a-quarter-inch thick, total weight on this table top is about twenty pounds. But that should do it for the review on this replacement etrailer forty-two inch by thirty inch maple wood RV dinette table top..
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
Timely shipping. Product arrived as shown.
Would prefer to not get several automated emails trying to get me to order the same part again. not sure why it was doing that? Maybe it was a glitch in the system.
The problem I have , was that the screws that hold table in place would strip out . Need to place reinforced plate at end.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.