Stylish, sleek dinette tabletop has cherry wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, cherry finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e45CR, e65CR) and a dual leg kit (e86BR, e29BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this replacement etrailer, 42 inch by 30 inch cherry wood RV dinette table top with the black trim. Now this part will replace your upgrade the table top on your etrailer RV dinette table, or it can be used with other dinette brands of the same size. It is designed to work as a direct replacement on the etrailer dining tables, part number E 45 CR and E 65 CR. Both of those tables we sell separate on our website. Now this part is just for the tabletop itself.
It will require one or two table leg kits for a complete setup. And those table leg kits are sold separately on the website. They are listed on this product page as a related product. The flush mount table leg is part number E 69 RR and the surface mount table leg is E 79 RR. Now this is an ultra strong high density EPS foam table top core.
Ensures durability and stability has a nice cherry wood grain laminate on it, provides the perfect accent color for your existing decor and has the black edging. You can see all the way around the edge here. This adds a nice contemporary feel and I wanted to show you that edge banding on it. The black edge banding. If you look real close you can see goes around the whole edge of the table and it reinforces the table sides and even seals moisture out.
So it'll prevent the table top from any peeling, cracking, or warping. Now, on the under side of this table top, if we flip it over, just wanna show you the first things you'll notice is the three large circles on the under side. And basically those circles are letting you know where the internal screw plate is located. They put a screw plate on the inside of this table top to attach your legs to. That'll assist with the screw retention when you're attaching your table legs and they put them where you want to put the legs, they put these circles.
And if you're gonna do a one leg table it's gonna go right in the middle here on this circle. If you do two legs, it'll be the two outer circles. And again, that flange on your table leg will be the same size as the circle. So you just put the flange up to the circle and then you can put your screws into the table. Now this part is made in the USA. Few specs on this: the length from this end to this end is 42 inches long, a width 32 or 30 inches wide. And the thickness of this table top is one and a quarter inches thick. Weight on this is about 20 pounds. But that should do it for the review on this replacement etrailer 42 inch by 30 inch cherry wood RV dinette tabletop with the black trim..
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Stylish, sleek dinette tabletop has cherry wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
Timely shipping. Product arrived as shown.
Would prefer to not get several automated emails trying to get me to order the same part again. not sure why it was doing that? Maybe it was a glitch in the system.
The problem I have , was that the screws that hold table in place would strip out . Need to place reinforced plate at end.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.