Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, maple finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e62CR, e42CR) and a dual leg kit (e63BR, e23BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
JEFF Hello everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this replacement etrailer, 42 inch by 30 inch maple wood RV dinette table with the black trim. Now, this part will replace and upgrade the table top that's on your etrailer or RV dinette table. Or it can be used with other dinette brands of the same size. It is designed to work as a direct replacement for your etrailer dining table part number E42CR and E62CR.
Both of those we sell separately on our website. Now this is just for the table top. It does require one or two table leg kits for a complete setup. Those kits we sell separate on our website. and they are listed on this product page as a related product.
If you want the flush mount table leg, that's part number E69RR. Or if you want the surface mount table leg that's part number E79RR. Now, this table top is an ultra strong, high density, EPS foam tabletop core. It ensures durability and stability. You can see the finish is a nice maple wood grain laminate provides the perfect accent color for existing decor and it does have the black edging that goes all the way around the tabletop.
Adds a nice contemporary feel. Now, I did want to talk about that edging. Zoom in a little bit to show you it up close. This edge banding will reinforce the table sides and help seal out any moisture, prevents the table top from peeling, cracking, or warping. Now, on the underside of this table top, let me just flip this over so you'll be able to see.
Once we flip it over, first thing you'll see is those three large circles right there and that shows you where the internal screw plate is in the tabletop. On the inside of this tabletop they do have a mounting bracket, which is an internal screw plate, and it'll assist with your screw retention when you attach your table legs to the table. Basically, if you attach one leg it'll go right here in the center. If you're gonna attach two legs, it'll go on these two outer circles. But what's nice is these circles are the same size as the flanges on your mounting legs. So all you do is put that flange up to the circle, line it up, put your screws in and it'll hold it into place. Now, this part is made in the USA. A few dimensions on this, The length, one end to the other, is 42 inches long. The width is 30 inches wide, and the thickness on this tabletop is one and a quarter inches thick. Total weight is about 20 pounds. But that should do it for the review on the replacement etrailer 42 inch by 30 inch maple wood RV dinette tabletop with the black trim..
Average Customer Rating: 4.6 out of 5 stars (5 Customer Reviews)
Stylish, sleek dinette tabletop has maple wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
Timely shipping. Product arrived as shown.
Would prefer to not get several automated emails trying to get me to order the same part again. not sure why it was doing that? Maybe it was a glitch in the system.
The problem I have , was that the screws that hold table in place would strip out . Need to place reinforced plate at end.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.