Superchips Flashcal Calibration Tool for Ford Bronco

Video Transcript for Review of Superchips Performance Chip - Flashcal Calibration Tool Ford Bronco - SU67SR

Hi everybody, Andy here with etrailer.com. And today, we're gonna take a look at the Superchips Flashcal calibration tool for your Ford Bronco. Now this is going to fit the 2021 and newer Ford Bronco 2.3 liter I4 and the 2.7 liter V6 EcoBoost engine to see if we have something comparable that will work for your vehicle. If you don't have a Ford Bronco, take advantage of our vehicle fit guide here etrailer.com and input the year, make and model of your vehicle, and our fit guide will let you know if we have something like this that will work for your vehicle. Now this features a 2.8-inch high resolution colored screen with simple and easy-to-use menus. And this handheld calibration tool is designed to plug directly into your Bronco's OBD-II port to calibrate it for modifications, turn it in into a superior off-road machine.

It recalibrates your factory speedometer to correct for 28 1/4 inch to 36 3/4 inch upgraded tires and various gear ratios. And it will let you adjust your vehicle's lighting such as disable your daytime running lights, customize your head lamp, positioning and time delay, and run your fog lights and high beams at the same time. This is going to let you disable or customize your tire pressure monitoring system for off-road tires. The front and rear axles can be set differently from 1 to 90 psi, and you will be able to customize your remote start and smart key functions. The silent mode turns off most cabin and exterior lights and the open door chime.

The honk warning when the driver exits a running vehicle with key fob can be disabled. The factory auto lock settings can be disabled. Your key fob can be programmed to unlock just the driver door or all doors. And the remote start run duration time can be changed in five minute increments up to 15 minutes. This is going to let you read and clear diagnostic trouble codes, display battery voltage, and give you real-time data logging and monitoring.

You can easily update this by the included USB cable on most computers. And just to kinda give you an idea of how big this unit is, measuring the height first, and I'm gonna set it this way because it's a little bit easier to line my ruler up. The overall height, we are sitting right at 5 1/2 inches. And then the overall width, we are sitting pretty close to 2 1/4 inches. And at the thickest points, we're sitting right at about, pretty close about 3/4 of an inch at the thickest points.

So this includes everything that you see here on the table before me. You're gonna get an instruction booklet to walk you through the features and how to operate this. And I do wanna point out that not all features or monitored parameters are available for all applications. Available features and parameters will pop up automatically on the display once the Flashcal is plugged into your Bronco. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..