Off-road LED light bar shines a mixed spot/flood beam so you can see the trail at night or in bad weather. Installs on your roof, roll bar, bumper, or grille guard with included adjustable brackets and wiring harness.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at the Arc Extreme 30" Long LED Mix Beam Light Bar Kit. Now, this is an off road LED light bar, which will shine a nice bright white mixed spot and flood beam so that you can see the trail at night or in bad weather. The combination beam will increase visibility in front of you and off to both sides. The spot beam distance which would be this part straight ahead of you, it'd be 1,837 feet.
And the flood beam width is gonna be about 180 feet. This does include 30 LEDs, provides 13,100 lumens of light. And I do have this hooked up to some 12 volt power just to show you how bright the light is. So we have our wiring harness hooked up. That wiring harness is included And it has a rocker switch on it so when we push the rocker switch on, if you notice, the rocker switch lights up to show you it's operating and the light is on.
So we'll go ahead and turn off our overhead lights and you can see how bright the light is. And again, it's 30 LEDs. Gives you both a spot beam for distance and a flood beam for width. And again, if you use your rocker switch, turn it off, turn it back on. You can see the red light.
Light it up on your switch to let you know it's operating. Gonna go ahead and turn back on overhead lights. Now this is a durable polycarbonate lens that's impact and shatter resistant. The housing the slide is in is a black powder coat aluminum housing. This will resist corrosion and also dissipates the heat better.
This light has an IP67 rating to protect against dust and moisture. And it is a simple installation to your roof, your rollbar, a grill guard, even your bumper. It does include the mounting hardware, includes the mounting brackets, both the side, one on each side. And if you notice the bottom mounting brackets, and I've installed all of them, you can use 'em together or you can use 'em just as mounting brackets or just the side brackets. Gives you different installation options for your application. Hardware is included for installation. And what's nice on these brackets when they are installed, they do let you adjust the light. Put it at the right angle as needed. Now, this is a 30 inch long light. It is also available in a 20 inch length. We do sell that separately on our website. And I mentioned the wiring harnesses that is included with this. I do wanna talk about the wiring harness. And basically, we'll unhook it right here from the light. So basically your wiring harness, it will include the two pin. Right here, the triple sealed two pin Deutsche connector that is what'll plug into your light. Just like that. Makes your connection. And to remove it, just push down and remove it. It will include, we showed you the lighted rocker switch to turn it on or off. Comes with a HID relay, also. And then the two lead wires that connect to your battery. You can notice they do have ring terminals on them. And it does come with a fuse to protect everything. Now, this is intended for off-road use only. It does not meet the DOT or SAE standards. Few specs on this. The quantity is one light bar. Lumens on this is 13,100. This does use 30 LEDs. They are six watts per LED. So that's gonna give you a total wattage of 180 watts at 13.6 volts DC. Last thing I want to do is zoom in and we'll do some measurements on this. The overall length, we go from one end to the other, is gonna be right at 32 inches long. The depth on the light bar is right at one and three quarter inches deep. The overall height, we're first gonna do just the light bar, which is gonna be one in three quarter inches. And then if we do it with the mounting brackets included, so from the table to the top of the light, about two and a half inches tall. But that should do it for the review on this Arc Extreme 30" Long LED Mix Beam Light Bar Kit..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.