Off-road LED light bar shines a mixed spot/flood beam so you can see the trail at night or in bad weather. Installs on your roof, roll bar, bumper, or grille guard with included adjustable brackets and wiring harness.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a look at this arc extreme LED light bar. Now this off-road LED light bar is going to shine a white mixed spot and flood beam. So you can see the trail in front of you and off to both sides at night or in bad weather. So it's going to be ideal for your off-road adventures.
Now the high quality light output comes from 20 Osram LEDs that provides 7,500 lumens of light. And let me go ahead and turn the power on. I'm gonna aim this down here a little bit so I don't blind you and you can already see just how bright this is. And then I'm going to zoom back out to the wide view here. So you can see just how bright this is better yet let me turn the studio lights off.
And even with my studio lights off and this light shining on my table, you can see me pretty well. So this is a very bright light, again 7,500 lumens of light. And let me go ahead and shine this on the wall behind me. This has a beam distance of 1,535 feet long and width 150 feet wide. So you can kind of see the beam patterns there on the wall behind me.
And this light is activated by this illuminated rocker switch here. So lemme go back to my close up here and shining this light down here just a little bit. This rocker switch lights up when you turn the light on. And so this is going to be a great easy way to turn this light on. Lemme go ahead and turn that off.
And again, that rocker switch will turn that light on. So very easy to use. And this light bar is intended for off-road use only. It does not meet the department transportation or SAE standards. So it is important to be aware of that. This light features a black powder coded aluminum housing that is lightweight, and rustproof, it is IP 67 rated to protect against dust and moisture. And this durable polycarbonate lens is impact and shatter resistant. Now, this is going to be a simple installation, whether it be on your roof, your roll bar, your bumper, your grill guard or bull bar. It includes both side and bottom mounting brackets for different insulation options. And the brackets are adjustable. And I've been kind of playing around here with the angle of this light already with these brackets. So you can easily adjust the angle of the light as you need. And the wiring harness is going to be included with this kit. And I already pointed out that it does include the rocker switch but it also has one tripled sealed Deutsch connector Deutsch, DT connector. And that's the connector right there. It's just gonna plug into the back of this light bar. So it's gonna be a very simple process and it has a nice click to it when you lock it into place. And then a little release mechanism to disconnect these plugs. This wiring harness also has an HID relay and then lead wire. I'm go ahead and unplug this for my power source here lead wire with a fuse and terminal rings. So the overall length of this light bar not including the brackets that I have installed here the overall length we're sitting right at 22 inches long, the overall height, again not including the brackets, just light bar itself. We're sitting right at one and 11-16 inches tall. And then the overall depth we are sitting right at one and 13-16 inches deep. I do wanna point out that on this product page we do have a dimensional diagram in the photo section. So this includes everything that you see here on the table before me, it includes one LED light bar and you're gonna get those side and bottom mounting brackets and the hardware for that installation. And then the wiring harness that we talked about just a minute ago or so and also instructions to help you in the installation process. Just some other bits of information that might prove helpful to you. The wattage is 120 Watts at 13.6 volts DC. So that is six Watts per LED. And the current is 8.8 amps at 13.6 volts DC. The voltage is nine to 36 volts DC. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.