To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These 5" wide steps with rounded ends mount close to your Honda Pilot for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with polished stainless steel trim. Custom installation kit included.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, on this 2016 Honda Pilot, we'll be having a look at and showing you how to install the Aries AeroTread Running Boards with Custom Installation Kit. Part number AA2051029. Here's what our running boards look like installed. Now, the reason you're going to want a set of running boards for your vehicle is not only do they add a stylish look to it, but they also make it a lot easier for you to get in and out of it as well.These run the full length of your passenger compartment, so it makes it easy for your back seat passengers to get in too. We have this nice plastic step surface, which is 5" deep from the very back of it to the very front of it, which makes a wide path for your foot to make contact with. So you don't have to worry about slipping and falling as you're getting in and out of the vehicle.
The outer construction is a polished stainless steel, which gives us a nice look. The inner construction is a lightweight aluminum, so it's very strong and rust resistant.One unique feature about these running boards, which I personally haven't seen in others, is that there is a weather strip seal that goes between the running board itself and the body of the vehicle. This will help keep out any mud, dirt, or snow from getting trapped in between the running board and the body of your vehicle, which could cause rust over the course of time. These running boards feature a 500 pound capacity, so they offer more than enough weight capacity for anybody to get in and out of your vehicle.The mounting brackets that come with your running boards are specific to your vehicle. They are an easy no-drill application that'll simply bolt to the existing holes already in your vehicle.
Also, they are constructed of a powder-coated carbon steel, so they're extremely rust-resistant and very strong. Now, if you aren't a fan of the polished stainless steel look, that's not a problem. We do offer these with a matte black finish as well.To begin our install, we're going to be working on our rocker panel. We'll be on the driver's side, the passenger side will be the exact same way. Okay, we're underneath the vehicle now, looking at the inside and to the rocker panel.
We're looking at the rear mounting location right now. We'll have two well nuts, one that goes in horizontally, and one that goes in vertically. This is where our installation hardware will go. We'll have a metric bolt with a lock washer on it and a flat washer. All of the mounting hardware is exactly the same, so just keep that in mind.
Take the bracket, and see how it's going to line up with those holes with the shape that it has, and we'll just loosely thread in both of our bolts. This way, we can adjust it later.Okay, perfect. Now, just forward of the rear one, we'll have our middle one. This one is a little bit different. We have a vertical bolt, and then one that comes in at about a 45 degree angle. Now, at the very front, we'll have two well nuts that are vertical. So we'll use this bracket here and we'll get our bolts started. Okay, with all three of our brackets now loosely started, we can set our running board on top of it.We're looking at the bottom of our running board right now. Notice our bolts are pre-installed in these channels. All we'll have to do is slide them near our brackets so they'll line up. Once we have it lined up, we can take our running board and we'll slide it onto the brackets with the bolts going through the brackets. Now, you can see how our brackets have these slots, so it does make it a little easier, especially on the inner one. You can just kind of slide it through the slot like that, and drop your outer one through the hole.Okay, with our bolts poking through our brackets now, place on a flat washer, a lock washer, then we'll thread on a nut. Again, we don't need to have these tight for the time being. Just loose enough so we can maneuver the running board around as necessary. We want to make sure we do this at all locations. Now, using a 13mm socket, we can begin the process of tightening down our hardware. We'll begin with the bolts that secure the brackets to the body of the vehicle first. Now, we're going to go ahead and ensure that our running board is centered on the vehicle. You can either move it side-to-side, you can because of the slots where the bolts go through in the board, and if you need to pull in or out, you can because the brackets are slotted. We have it where we need it right now, so we can tighten our hardware.Now, we'll just make sure everything is nice and snug. With our driver's side now installed, we'll go ahead and repeat the same process for the passenger's side. That'll complete our look at and show you how to install the Aries AeroTread Running Boards with Custom Installation Kit, part number AA2051029, on this 2016 Honda Pilot.
Average Customer Rating: 4.7 out of 5 stars (114 Customer Reviews)
These 5" wide steps with rounded ends mount close to your vehicle for a streamlined look. Full-length plastic pads create non-skid surfaces. Constructed of rustproof aluminum with polished stainless steel trim. Custom installation kit included.The running boards bolted right up to the vehicle with no problem. They seem to be sturdy and are tucked in as to not protrude past the body.
My wife is short and likes the assistance they give her entering the Pilot.
I enjoy the prompt delivery and service from etrailer.
Thank You for my wife's birthday present for her 2020 Honda Pilot!
Better than expected, Perfect fit, I wanted something that didn't stick out too far and I think 5 inch is the perfect size, Good packaging, box had a couple of holes from shipping but no damage to product. Only thing as mentioned in other reviews front and rear brackets labeling is reversed but easy to figure out.
Benny R.
5/9/2022
Still Looks brand new, really like them
I had purchased another brand of running board for just about the same money and the overall quality was poor. I returned them and bought from etrailer because the quality of the last item I bought from them was very good. I love the way they look on the Pilot and they are already proving useful for the shorter family members and assisting them getting into the Pilot easier. I was sent the wrong hardware first off , etrailer offered to let me go to my local store and purchase it and they would reimburse me or they would mail me the correct hardware. I chose the second option since I wasn’t in a hurry. Not awesome but they resolved it so no biggie. One other thing that confused me was that the brackets were marked “DSF, DSM & DSR” and additionally “PSF, PSM & PSR”. I assumed this meant “Drive side and Passenger side “Front, Middle and Rear”. But the brackets were stamped incorrectly. The DSRear was actually the front one. It wasn’t hard to figure out which ones matched with the holes in the frame because they are all very different but it’s weird they were stamped wrong. Maybe the letters don’t stand for what I thought they do and I’m open to that possibility.
All that being said they went one easily enough. It took about 90 minutes with and extra pair of hands at times. I really do like the look and they just sort of make a plain looking Pilot look sharp.
Install was easy, especially with instructions plus video. Like the way it turned out. Thanks etrailer!
Product arrived packed well, and is exactly as described. Installation without jacking the car up wasn't difficult once I figured out that the position identification stamped on the brackets was incorrect. For example the bracket stamped DSR wasn't for the drivers side rear but the driver's side front, and visa-versa. Both sides!
Terence S.
9/15/2020
Working out great, no problems
These guys were very helpful sent out the right away and the product was fantastic. I would not hesitate to buy from them again.
They look awesome on my 2021 Honda Pilot. Love them!
Easy installation very good product
They fit perfectly Easy to install
Very easy install6..arrived quickly.. looks amazing
Great value. Very quick delivery!
The installation was very easy thanks to the instructions that came with the order. It took about 30 minutes per side. They look fantastic and my wife is very happy with them. I wish other companies would follow your lead. Thank you very much.
One year ago I purchased these running boards to be installed on my 2022 KIA Sportage. I was having trouble getting in and out of my SUV when my sciatica nerve was acting up. These running boards not only put more style on my vehicle, they are a blessing that I can get in and out of my vehicle when I am unable to twist and turn. If I didn't purchase these step boards, I would have had to trade my SUV in for a car that I would have been able to get in and out of. I definitely recommend these running boards for several reasons and as I use them everyday after 1 year, they still look as new as they did a year ago when I had them installed.
Boards look great, and the installation was fairly easy. 1st side took me about an hour and second side was on in 30 minutes.
Followed etrailer video to install. Installation was easy. I did it on a cold day so it took longer than expected but overall, satisfied with the product.
Very high quality product and installation was a snap. etrailer delivers once again. Delivery was earlier then stated.
I have instructions that are to follow, but these are terrible. You must think that the average person will know how to use the pull through nut. Your instructions tell you where to it and that is all. And what does it mean to put M 10 bolt plate in the rear mounting hole. Please show these instruction to someone who has never put these running boards on and ask what he thinks It would be easier to drill holes
Boards look great and appear very sturdy. I installed with no elevation of vehicle in 2 hours 5 minutes which included removing the passenger board for the correct one. It wasn't yet tightened so not too hard. Instructions are ok and provide basic info but I learned more in the comment section here. The brackets are not labeled correctly and face one way on the passenger side and the opposite on the driver side. Don't worry, it all works. The instructions did clarify that forked brackets go to the front and that all others worked middle and rear regardless of stamped markings. Very little room to work under car but I managed. Boards look durable and are very good looking. Mount is sturdy but it would help if boards were marked for Passenger/ driver. I saw the tread pointing toward the front in a picture and so I removed first board and swapped. Screws don't move as freely in the tracks but sufficiently so. All in all, I would buy them again and do it again. Not sure if they are lined up right but an easy fix if they need to move a little forward or back; for now they are centered.
Shipping was fast. Installation was fairly simple and didn’t take much time. They look great on my Durango! Just what this vertically challenged girl needed!!! Thank you!!,
Running boards have a very good appearance they improved the looks of my 2020 Traverse the middle and rear mounting brackets take a little time they are tricky to mount however I was successful in getting them mounted. We love the product
These running boards are very good quality and fairly easy to install. Make my Traverse look much more nice. Oh, and perfect for assisting in entering the vehicle. Well worth the price.
I like the way they look however, the corner on of the running board came in damaged. I did not even wanted to open the other running board.
It really helps my wife get into the vehicle. I use it too but not as much since I have longer legs.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Wayne
11/14/2023
Great!