To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your Ford F-250 Super Duty and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.
Features:
Precision fit, durable components and ease of installation make WeatherTech NoDrills your first choice in mud flaps. Installing mud flaps has never been this painless. Patent-pending QuickTurn stainless steel fasteners makes installation quick and easy - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2018 Ford F250 we're going to be taking a look at and showing you how to install the Weathertech easy install no-drill mud flaps for the front and rear. It is available for the front only and for the rear only. So here's what our mud flaps are going to look like once we have them installed. Now these are going to greatly reduce the amount of dirt and debris that's going to be on the lower section of our truck and our running boards.And you can see that our mud flaps are going to contour all around the body perfectly because they are custom made for our truck. They are made out of a durable thermoplastic resin so they're going to hold up to even the harshest environments. And here you can see the rear mud flap.
It's going to contour around the body nicely as well. Now the rear really is going to help maintain the back of our truck from getting dirty, like the tailpipe, keeping it from rusting out over time and it's going to keep our trailer or our camper nice and clean on the front.Our mud flaps aren't going to require any kind of drilling because they're going to use the quick turn-style connector. There's a little cam in there to squeeze against the body and then I'll use factory holes with stainless steel hardware so we won't have to worry about them rusting out. So now that we've taken a look at our mud flaps let's show you how easy it is to get them installed.To begin our installation we're going to start on the driver's side front. If we come to the back of the front wheel well we'll have two bolts that are going into the side of the body here.
Grab a 5-1/2 millimeter socket and I'm going to pull those two screws out. You want to make sure you hold on to them because they are going to get reused. So we can grab our mud flap. They are labeled so you just grab the one that has the LH on it for left-hand.Then we want to bring our attention to the cam that's up here. Now with the cam you can to see that we're going to have two symbols.
We'll have a lock and then an unlock. You want to rotate this so that this little tab here is in the unlocked position. Then we can set it against the truck. We'll line up our mud flaps and the two holes line up with the factory holes. And we're just going to loosely install the screws so they'll hold it in place.Then we can take the included Allen key.
We'll come to the cam and we're going to tighten it and as we tighten it you'll see that cam swing over to the lock position. We'll continue to tighten it until it gets nice and snug. You don't want to crank down too much. You just want to make sure that it's snug and that it's not going to come loose. Then we can come back and tighten up those two screws with that 5-1/2 millimeter socket.And that will finish up the install for this one on the front. So we'll go ahead and repeat that for the other side as well. If we move back to the rear wheel well we're going to have two pushpin fasteners on the bottom of this rocker panel. We're going to need to pull these two out. I'm using a trim panel tool. You can use a flathead screwdriver or whatever you have available. But I will let you know that typically these fasteners do break sometimes but that's okay because they're not going to be getting reused.And if the head of the pushpin breaks off we can just push it in until it falls out. So we can grab our rear mud flap and again you want to make sure that cam is in the unlocked position. Now these two holes in the mud flap are going to line up with those two holes we took the pushpins out of. But we're not going to be using pushpins. We're going to be using a set of screws and these black washers to go through.These are going to go all the way through the mud flap and through the bracket right here and then we're going to be attaching some hardware on the back. It's going to be a little bit hard to see because I'm going to have to have my hand in there. But we'll line everything up and put one of the screws in place. You kind of want to just hold everything, make sure it doesn't fall, you don't lose your hardware.And then we're going to reach on the backside, follow our screw up with a silver, flat washer and then we're going to secure it down with one of these black flange nuts. It is a little bit of a tight fit but you can reach your hand behind there and put the hardware in place. Now I found that it's a little easier if you can get one piece at a time started so if you can get the washer just to sit on the bolt and then put the nut on. And just get it on there hand-tight it will hold everything in place we can get the rest of the hardware in.So with the rear one in place we'll take our included Allen key again. We're going to tighten up that cam so it's nice and snug, making sure it's in the locked position. I'm going to grab a Phillips bit or a Phillips head screwdriver and we can tighten up the two screws so they're snug. Now the nuts on the back or flange nuts and have little teeth on them so if we get them snug enough by hand we should be able to tighten these up without having to hold the nut on the back.And then we can repeat that process for our other rear mud flap. That will finish up your look at the Weathertech easy install, no-drill mud flaps for the front and rear.
Average Customer Rating: 4.8 out of 5 stars (1389 Customer Reviews)
These premium mud flaps are easy to install and digitally designed for a perfect fit. Protect your vehicle and your trailer from road debris. Flaps are constructed of durable thermoplastic resin with stainless steel fasteners.Look great! Look OEM. Wish all the hardware was black. And in the front the two screws you pull out both sides, trash go get something a little longer and more girth. etrailer was great the arrived earlier then expected.
This is a good investment. First, etrailer is a great place to get what you need for supplies! The weathertech mud flaps are a great addition to a raised F-250 with larger tires that pulls. This will provide the rest of the protection I need as well as cut down on debris that the tires throw up at other cars/trucks. Very easy to install and if I want to remove them then I have all the pieces necessary except for the push grommets which I can get anywhere. I think I will leave them on for a while....not bad looking either.
Fberg
12/22/2021
I have not taken them off yet so that says a lot. These are a good investment….period. They cut down on debris that used to fly up and hit the side of the truck.
Excellent fit and easy installation. Seen doing there intended job in a wet northern Arizona winter.
Steve F.
3/13/2021
Still working excellent. I live 3 miles on very rough road to paved road. Snow, rocks, dirt, monsoons, freezing snow and 110 degree summers. Not a bit of a problem with the mud flaps. Still washing up like new. They were so easy to install.
The mud flaps are a perfect fit! Took only 15minutes to put all four on my truck. All parts and Allen wrench supplied with flaps. Only tools I need from my toolbox was a 5.5mm socket, shorty Phillips head screw driver and a cat's claw to remove the plastic push fasteners. Should keep most of the mud and crud off my tail pipes and side steps.
These are sturdy and do the job, but could be about an. Inch wider for more road spray protection.
One failed and somehow got up on the tire… not sure how that happened but it did.
Weather tech was awesome and sent a replacement.
Installation is simple but you do need to get your hands in some tight spots while holding a washer and nut.
Superduty
3/2/2023
2 years later and look and function great
Very simple installation. I thought they would be made with a little softer material but look like they will hold up well.
Paul
5/13/2023
My weather tech mud flaps dont show any signs of wear and tear and its been a yearwith a mix of highway and offroading.
These look great and are very sturdy. They are very easy to install only took me 20 minutes and it was in the dark. No more mud slinging all over my nerf bars and tail pipe or tear end when I go to deer camp. I definitely recommend them! 5 stars and kudos too.
Uses original hardware on front end and supplied hardware on rear end.
Fast and easy to install. Fit was perfect. No more ice buildup on my running boards or my fenders.
Purchased these mud flaps for my 2017 F250 last week. Installing them was super easy!! Great quality and great customer service. Thanks!
Good product easy to install shipping was quick no problem will order from etrailer agin the sales person knew the product that’s a plus thanks
Install was very straightforward and quick. Total time was less than 1 hour easy. The method of attachment was very effective and non-destructive. 1 year later, they are still hanging in there with zero issues. They work great with keeping mud and rocks off of my rocker panels etc.
Work great perfect fit and easy to inst all
Perfect fit, easy install and has held up great for the past year. Saves on road debris chipping side paint and was a good buy.
I would certainly recommend this item to anyone without any reservations.
Very pleased with the Weather Tech mud flaps. The fit is perfect and the install could not have been easier. I took my time and still had them on in minutes. No need to turn the front wheels if you are using a 5.5mm wrench. Looks good on the truck, too.
David
7/20/2020
One year later they still look good and have not moved. Very happy with them.
I've had the Weathertech No-Drill Digital Fit Mud Flap for my F-250. They fit perfectly and went on easily. They have withstood a long meandering drive across the country as well as a tough winter in Montana. No slipping. No readjusting.
Richard D.
2/20/2021
When I clean them up, they still look new.
I love these mud guards, I did not like there floor mats, this is the only product from weather tech that I have liked. this is my second set . for two different trucks. can't ask for a better fit.
Monty
2/7/2022
Great mud guards! ive bought a few more sets for different rigs since this first review and im completely happy with my purchases.
They fit like a glove. Took about 20 minutes total to install.
I was impressed with the over all fit and look of these.
I used a 7/32 socket for the screw head size on the front.
Box was missing parts. The mud flaps were ordered for a customer vehicle. We had to go find our own parts, to finish the job,so more money wasnt lost. Ridiculous that parts were "robbed" and, there was no quality assurance, to ensure all the parts were in the box.
Katrina B.
8/17/2022
I am sorry to hear that your order was missing some items. I have sent your information over to our customer service department for them to better assist you.
These WeatherTech mud flaps are the best! Easy to install and look great!
Thomas H.
12/6/2018
Great!
Had all four on in less than 20 minutes. Fit great.
Super easy to install. They look great! !!
It’s happened to me before they sent vent shades for crew cab not super cab. I’ll just use the front ones.
Sierra K.
8/10/2021
I am not seeing the other order for mud flaps. These are not categorized under crew cab or super cab. These fit 2021 Ford F-250 Super Duty no matter the cab size. However, if you have add-on fender flares or oversized tires, these will not fit.
Do you have a question about this Mud Flap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thomas
9/7/2021
Excellent