BedTred Custom Jeep Replacement Floor Liner w/ Heat Shielding - Front and Rear Floorboards - Rubber

BedRug Floor Mats - BTTJ97F

Restore the floorboards of your Jeep while insulating against heat and noise. Replace the carpet with an easy-to-install liner that looks and feels like a spray-in liner. The waterproof and slip-resistant liner includes special heat-shielding panels.

Features:

• Rubber-like, non-skid liner insulates your cab from heat and road noise and makes your floor look brand new
• Heat-blocking fiberglass panels are backed with reflective aluminized foil
  • Keeps your cab cooler in warm weather
  • Withstands direct, continuous temperatures of up to 400 F (204 C)
• Stain-resistant, polypropylene plastic material offers rugged protection
  • Stands up to mud, rocks, and debris without tearing
  • Repels oil, bleach, and even battery acid
• Waterproof liner dries quickly to resist mildew and odors
• Sturdy flooring is slip- and skid-resistant for added safety
• Thick foam backing helps reduce road noise for a quieter ride
• Custom formed to your vehicle for a snug, full-coverage fit
• Easy to clean - just vacuum or for deep cleaning, remove individual pieces to hose off or powerwash
• Fast installation with hook-and-loop system similar to Velcro - no need to remove seats or center console
  • No drilling or surface-prep sanding required
• 3-Piece kit replaces front and rear floorboard carpeting
  • Add a bed liner kit (sold separately) to cover your cargo area, wheel wells, and tailgate
• Made in the USA

Specs:

• Thickness: 1/4"
• 3-Year limited warranty

Note: Not recommended for use with floor mats because they will not grip the BedTred liner and may slide.

Cover your bare flooroboards or upgrade your existing floorboard carpeting with a non-skid, custom fit floor liner that has the look and feel of a spray-in liner. The thick foam backing insulates your passenger area from heat and road noise, and the liner is removable for easy cleaning.

Complete Floorboard Coverage

The kit has 3 pieces: 1 section for the front driver floorboard, 1 section for the front passenger's-side floorboard, and 1 section that covers the rear floorboard. For added coverage, a cargo liner kit (sold separately) is also available for your rear cargo area, wheel wells, and tailgate.

Rugged Construction

This 1/4" thick polypropylene plastic material stands up to mud, gravel, and debris that can migrate in from a rocky trail. The rugged liner pieces won't stain or rip, and they resist damage from battery acid, oil, and bleach. The inside of your Jeep will look brand new for years to come because the liner withstands heavy-duty use.

Heat-Blocking Panels

Trailblazing is hot work. Your Jeep generates extra heat when you're pushing it to the limit over rough terrain. The heat radiates through the front floorboards and turns up the temperature in your cab.

This floor-lining kit has 2 sections of heat-shielding material that install on the back of the front driver's- and passenger's-side liner pieces, near the center console. As the pictures above show, to install the heat shielding, you just peel the backing off the panels and stick the insulated sections onto the back of the front floorboard pieces. The heat shielding sections are then hidden beneath the liner. These fiberglass insulation panels are backed with a layer of reflective aluminized foil to block engine heat and can handle direct, continuous temperatures of up to 400 F (204 C), so they help to keep your cab cooler in hot conditions.

Easy Cleanup

Jeeps get dirty, and a BedTred liner makes it easy to clean your floorboards. For light cleaning, just vacuum the liner to remove any debris. For heavy-duty cleaning, remove the individual pieces of the liner, hose them off, let them dry, and put them back in your Jeep. The liner resists mildew so it won't stain or smell and it dries quickly.

If your liner gets wet, the BedTred won't trap water underneath the liner because the closed-cell foam backing does not absorb water. Any water escapes through the drain holes in your floor.

Hassle-Free Installation

If your Jeep has carpeting, remove it before installing this replacement lining. You don't need to remove your seats or center console to install the flooring. The BedTred Jeep liner installs with hook-and-loop strips similar to Velcro, which makes it easy to remove the sections for cleaning.

How BedTred Compares to Spray-In Liners

A BedTred liner and a spray-in liner both resist mold, mildew, and odors, and both are easier to clean than carpet. However, installing a spray-in liner is often complicated and costly because of the substantial work required to prepare your Jeep for the spray. The BedTred Jeep liner installs quickly with minimal preparation. Spray-in liners also offer little in the way of heat and noise insulation. But the 1/4" thick layer of BedTred helps reduce road noise and block heat for a quieter, more comfortable ride.

BTTJ97F Bed Tred Jeep Floorboard Liner - 3-Piece Kit with Front and Rear Floorboard Sections - Heat Shielding

This Product Fits The Following Vehicles

• 1997 - 2003 Jeep TJ
• 2004 - 2006 Jeep TJ excluding Unlimited
• 1997 - 2003 Jeep Wrangler
• 2004 - 2006 Jeep Wrangler excluding Unlimited