2-1/2" x 7/8" Rectangle. Mini strobe light has 3 diodes and 12 flash patterns to alert others to the presence of your vehicle. Durable aluminum housing. Surface mounts with included 3M tape or bracket. 3-Wire design.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the two and a half inch LED clear multi-mount mini strobe light with three LEDs. This clear strobe light is going to have three LEDs that are going to have 12 flash patterns. It's going to include a synchronous and alternating functions. It's most commonly used on utility vehicles, pick up trucks, and construction vehicles.It's going to feature a versatile, multi-mount option. We're going to have the option to use the adhesive sticky pads to put directly on the bottom of the mount here. Surface mount, using the provided hardware, or using the included bracket and hardware, we can use it to mount onto our surface.The housing itself is going to be made out of a cast aluminum for durability and the LEDs are going to make great replacements for incandescent lights because they're going to last up to 50 times longer and be more efficient.
They're going to provide brighter light with less power output and there's no bulbs to replace, no brittle filaments inside to break.The housing itself is going to be black. The lens is going to be clear and we're going to have clear LEDs.As far as the wiring goes, we are going to have our blunt cut wires so we can get our connections made. The red wire is going to be for our power, our black wire is going to be our ground, and our yellow wire is going to be used to syncing multiple lights together and to determine which flash mode we want on.The light itself is rated IP67 for water and dust resistance, and it is SAE J595 Class 2 rated for brightness.I'll go and hook up the lights so you can see how bright it is and see the different flash patterns.We'll hook up our ground. And our power source. Turn on my power source.
And you can see the light itself is already pretty bright but I'm going to go ahead and turn off the overhead light and we can really tell how bright it is.Now, if I touch my yellow wire to my power wire we can go through some of the different cycles of the flashing, and every time I touch it, it's going to change to a different flash pattern.I'll go ahead and turn the overhead light back on. Turn my power source off, and disconnect my wires.Now I would like to give you a few dimensions on our light. The light itself is going to be right at two and a half inches long. Now as far as how deep the light is, including the mounting bracket itself, our light's going to be roughly right about an inch and a half deep. Our light's going to come in right about seven/eighths of an inch tall for the whole assembly.
We're going to get about 37 inches of wire lead coming off the back. And again, our light is going to have three separate diodes in there and it is going to work with 12 and 24 volt systems. Now, at 12 volts, it's only going to be pulling 0.22 amps.So that should finish up our look at the two and a half inch LED clear multi-mount mini strobe light with three LEDs.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.