Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
Item # C55774
Retail:$53.16
Our Price: $33.94
You Save: 36%
Confirmed to Fit
2007 Ford F-150
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (614)
- Q & A (0)
- Photos
2007 Ford F-150 - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- No Converter
- CURT
Quickly and easily install a 7-way and a 4-way trailer connector on your Ford F-150 with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind rear bumper
- Plug in connector
- Includes mounting bracket and hardware
- Comes with protective covers for connectors
- Assembled in the USA
- Limited 1-year warranty
Installation
This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
55774 Curt T-Connector - OE Multi-Socket Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors - C55774
Average Customer Rating: 4.7 out of 5 stars (613 Customer Reviews)
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.by: Peter 05/06/2024
The Curt T-Connector vehicle wiring harness fit as recommended by the etrailer.com customer service representative. I wanted to be sure the electrical connector package would fit my Draw-Tite hitch, and it did. The instructions were straightforward, although there were no screws or nuts to attach the metal bracket to the hitch. I had to supply those. I believe they should have been part of the kit. The installation video on the etrailer.com site was very helpful.
by: Charles 05/14/2024
Chevrolet TrailBlazer
This connector worked perfectly on my '06 Chevy Trailblazer. It was very easy to swap it out with my original connector, and the addition of the 4-pole plug makes it easy to eliminate the 7 to 4 pin adapter.
by: Andrew W. 10/26/2018
2003 GMC Yukon XL
I am having a problem with the install of the three Curt trailer components I purchased. I intentionally bought all of the same brand assuming that they would work together. The problem is that the Curt wiring harness (part# C55774) is too long and rigid. When the 7-pin connector is installed in the bracket that comes with it, it measure 5 inches until the black wire protective sleeve bends (to go under the hitch receiver frame).
The no-drill bracket (part# C57202) is supposed to attach the harness bracket to the hitch. But it is only 6.5" long, and the hitch tube is 3" wide. So with the bracket attached to the hitch, there is only 3.5" of space left to mount the harness bracket so that the screw holes line up.
I am disappointed that this is the case, especially as I called etrailer to check that the parts I was ordering would work together.
It looks like I will have to discard C57202 and drill two holes into the bottom of the hitch and mount the harness bracket directly. This is what I wanted to avoid - having to drill holes.
by: Clukero04/04/2024
2007 Chevrolet Silverado Classic
Excellent fit, oversized spare tire still fit underneath (285/70r17).
by: Tim R01/01/2024
2010 Chevrolet Silverado
Very easy, plugged right into the uscar connector, drilled 2 holes for the bracket, done
by: Mike04/11/2018
2015 Jeep Grand Cherokee
Super easy, very nice! Great engineering, couldn’t have been any easier! The girls at etrailer are super friendly and very helpful! Great prices and quick shipping, too!!
Mike
4/13/2019
Great. No problems.
by: David02/25/2024
2003 Mercury Mountaineer
This was supposed to be a plug in installation for my 2003 Mercury Mountaineer. No it wasn't. Completely different connector, and the wiring was 2 feet too short. Was able to use it after a bit of clipping and splicing.
by: Greg 04/20/2023
2006 Chevrolet Silverado
Very good, fit perfectly
Greg
4/21/2024
It has been working great, holding up well,the same as the day I purchased it. Great product
Bud M.
5/15/2024
@Greg
Great to hear. Thank you for the update.
Greg
5/15/2024
It has been great works exactly as it should
by: Martin04/22/2024
Product I ordered had an inaccurate description. Contacted customer service to return they would not send return shipping label so since the return shipping would have costed more than the part I threw it in the trash and ordered the part needed from another supplier. Needless to say I will not be ordering anything again.
by: Dylan04/10/2021
Perfect fit. My truck was not equipped with a tow package so I was a little worried it wouldn’t fit. The wiring and plug were already there with a cap on it to seal it from dirt/water. Took the cap off and this harness snapped right in place. Also installed an etrailer hitch and new bumper. Very happy with the products and the installer tools and information provided by etrailer.com.
by: Jim 05/04/2024
2017 GMC Acadia Limited
Working well. Have used the four prong plug only but am glad to have the 7 way available if needed.
by: Danny07/31/2020
Harness was easy to install. The truck came prewired. It just needed the adapter. We dremeled our the back of the bumper (2019 Titan’s have the cut our outlined on the back side already). We had to dremel 2 side prices off the harness, but it slide right now. Then we drilled through the plastics bumper cover and the metal on the bumper and bolted the bracket to the bumper.
The 4 point is just fished between the license plate and the bumper. It was easy and it now looks factory. Very happy with how it came out! Install was a cinch!
by: Sheldon06/19/2024
2018 Nissan Titan
Works like it should excellent service
by: John08/24/2020
2018 Nissan Titan
I have a 2018 Nissan Titan, and while the connector was a perfect fit for connectivity to the factory connector. The Curt T-Connector wiring harness was about 6 inches short from connecting to the factory harness when mounted on the trailer hitch bracket. So, I was forced to mount it on the opposite side by drilling holes in bumper.
by: Todd02/26/2024
2017 Ford Explorer
Always accurate parts and information
by: Matthew11/30/2017
If you have multiple trailers that either use a 4-way flat or 7-pin round connector and get tried of having to use an adapter go with this setup. I've had one on my other truck for a couple years and no problems with 'em thus far. You can technically use the old existing mount on the receiver hitch itself but the 4-way will dangle unless you ziptie it up.
by: Kent R.06/23/2017
2002 Ford Excursion
My 2002 Ford Excursion 7.3L diesel had the original factory hitch and wiring harness. The quality and heft of the Curt T-Connector is impressive. I bet I get years of use without problems.
by: Randy 05/15/2024
great product oem quality
by: Robert 04/10/2024
Perfect fit, works well
by: Caro H06/01/2021
Great product. Installed on my 2018 Jeep GC. Because of dual 4 pin and 7 pin connector I don’t need an adaptor when swapping out trailers/camper. Clean look to it as well.
by: Brett C04/15/2024
2024 Ford Bronco
Great product and very helpful staff! Thank you!!
by: Michael 05/03/2023
2023 Honda Passport
Bought this because of the split 4 pin and 7 pin connectors. I’ve had so many 7 pin to 4 pin adaptors and would forget that I let my son or son in-law use it and had to buy another one when I needed it. This will stop me from the need to buy another adaptor, good for me not good for my son and son in-law when they come over to borrow the trailer. LOL, who am I kidding I’ll still go with them to the store and buy another one.
by: Greg01/11/2021
2017 Nissan Titan XD
There was no place on the new hitch to bolt the end to, which was a disappointment. For now I sip tied the end to the hitch in an area where it does not move.
by: Rhonda04/17/2023
The actual trailer hitch was fine but the wiring kit was not the right kind. When I called to get a return authorization I was told that more than one half the cost of wiring kit will be deducted from my return for postage. I have never had to pay for returns to any company before. I will not be recommending your company
by: David 02/21/2024
2007FordF-150
Great product & customer service
25
614
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Replacing Factory Trailer Wiring On A 2013 GMC Sierra 2500HDIt will definitely be worthwhile to test the wires behind your trailer plug. This way we can know if the issue lies with the receptacle itself, or with the vehicle wiring harness. To replace just the receptacle, you can use the Curt # C55774. If you are needing to completely replace the vehicle side wiring, we suggest using a 4 flat harness # C56496 along with the Universal Install Kit # ETBC7. There are no plug-and-play options for this truck so this will require cutting and splicing...
view full answer... - Recommended 7-Way Connector for a 2023 Toyota 4Runner w/ Tow Package To install a 7-Way harness on your 2023 Toyota 4Runner, I recommend the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package item # C55774. This custom-fit connector plugs into your 4Runner's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side. Some other parts you will need to tow a trailer with your 2023 Toyota 4Runner are listed below: Wiring Harness Mount - No-Drill Mount Bracket item # 18136 Brake Controller - Redarc Tow-Pro...
view full answer... - What Wiring is Needed to tow for 2014 Jeep Grand Cherokee?When using the Draw-Tite Max-Frame, # 75699, to tow with your 2014 Jeep Grand Cherokee, you will need a wiring harness. The Curt T-Connector Vehicle Wiring Harness, # C55774 will give you a 7-way and 4-pole trailer connector, and will simply plug into the port you that will be behind the rear bumper of your Jeep. I have included links to video installs of both the hitch and wiring harness for you to take a look at.
view full answer... - Replacement 7-Way and 4-Way for 2004 Ford F-250We have a replacement 7-way and 4-way that fits your 2004 Ford F-250 with the part # C55774 which will plug right into the round trailer wiring connector you have at the rear of your truck.
view full answer... - All Other InquiriesHi John, If you have a factory brake controller you would see something like I have pictured below. The + and - will adjust gain and the other buttons slide together for a manual override. With you only having a 4-pole connector I doubt they installed a brake controller since it wouldn't have a way to send the brake output. I recommend looking around by the 4-pole wiring to see if you have a factory 7-pole wire harness connector so that you can install the Curt T-Connector Vehicle Wiring...
view full answer... - Recommended Trailer Hitch Receiver Installation on 2017 Jeep Grand Cherokee LimitedThe Curt Trailer Hitch Receiver # C13065 is a confirmed fit for your 2017 Jeep Grand Cherokee. You will be able to install the hitch without jacking it up, but you will have limited space to move. This installation is easy using a 21 mm socket with just 4 bolts and a torque wrench, so you can absolutely install this yourself. You do not need to move any electrical wiring for this install. I've attached a video to assist. To add trailer wiring, I recommend the Curt T-Connector Vehicle...
view full answer... - Replacement 7-Way For 2006 Ford F-350 that Plugs Right into Factory WiringSince your 2006 Ford F-350 uses the standard USCAR 7-way harness socket for a replacement all you'd need is the Pollak part # PK11893 and you'd be set with an easy to install replacement. If you were wanting a 7-way/4-way combo the Curt # C55774 that you referenced would work as well.
view full answer... - Does a Hitch With a Higher Capacity Than the Tow Vehicle Increase Towing CapacityWhen it comes to towing components like hitches, you're always going to be limited to the capacity of your lowest rated components; so adding a higher rated hitch to your vehicle isn't going to increase your towing capacity or the payload. From what I was able to determine with my research, the towing capacity of your 2015 Chevy Silverado 2500 HD with a 6.0L engine is 13000-lbs and the payload capacity is going to be somewhere between 3000-lbs and 3500-lbs depending on your trim package....
view full answer... - Does Curt 7-Way and 4-Way # C55774 Fit 2017 Nissan Titan SV Crew CabCurt has verified that their 7-way and 4-way part # C55774 is a fit for your 2017 Nissan Titan SV crew cab. Basically it just plugs into the 7-way wiring you have at the rear of your truck and then gives you both style of connectors. The mounting bracket is designed to attach to a lower bumper or fascia though and shouldn't be attached to the hitch as that would void the hitch warranty to drill into it.
view full answer... - My Trailer Lights Do Not Work Properly, How Do I Find The Problem?If you have a factory harness/connector, faulty wiring usually isn't the problem. I would inspect the connector on your truck # C55774 and the adapter # PK12716 connection on both sides. There is likely to be some corrosion or maybe some debris stuck in there bridging the two together. Also, I'm sure you've done this but make sure the adapter is connected to your truck in the right orientation. You can also test the pins on the connector that the harness plugs into. If the problem is there...
view full answer... - Which 7-Way For 2001 Ford F-350 Super DutyBased on how you described it, I'm guessing your 2001 Ford F-350 Super Duty needs a different part than the # C55774, but what does the plug look like? The correct 7-way is going to depend on that, as the Curt option you mentioned is a replacement 7-way, and has a round plug, while the other has a more square plug. If you take a look at the accompanying photos, you can see the plugs for the two 7-ways that could work for your '01 F-350: - Square Plug: Ford Replacement OEM Tow Package...
view full answer...
- Recommended Wiring Harness and Bracket for 2004 Chevy AvalancheSince your 2004 Chevy Avalanche had a rusted out bracket, I recommend the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. This will be a simple connection for your wiring and comes with a bracket that will allow you to mount it elsewhere or mount it in the same spot using the bracket as a backing plate to hole the connector tight.
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2005 GMC Sierra 3500Your 2005 GMC Sierra 3500, if you can handle a towing rating of 16K then I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15312. If you need the larger capacity then you will need the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15703 but you will use a different ball mount or likely weight distribution system shank for this hitch. For your wiring, I recommend the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package...
view full answer... - Easiest Trailer Wiring Solution for 2018 Jeep Grand Cherokee with OEM Wiring PresentIf it was my vehicle I would go with the factory tow package 7-way and 4-way wiring kit part # C55774 that you referenced since you have the connector present for it already. There's a good chance the wiring is already active too but at worst a trip to a dealer to have them reflash the computer would be super easy as well. The T-one style kits aren't terrible but if you have the wiring already present the route mentioned would be super easy and gives you both styles of trailer wiring.
view full answer... - Aftermarket Hitch Recommendation and Capacity for 2015 Chevy Silverado 2500 HDWhen it comes to towing components like hitches, you're always going to be limited to the capacity of your lowest rated components; so adding a higher rated hitch to your vehicle isn't going to increase your towing capacity or the payload. From what I was able to determine with my research, the towing capacity of your 2015 Chevy Silverado 2500 HD with a 6.0L engine is 13000-lbs and the payload capacity is going to be somewhere between 3000-lbs and 3500-lbs depending on your trim package....
view full answer... - Brake Controller for 2002 Chevy Silverado Not Getting PowerIf the lighting functions on your trailer connector are are functional, you'll probably need to install missing fuses in the power distribution box under the hood. On the inboard side of the fuse box, there are two threaded studs. The one closest to the cab powers the brake controller, which should have a 30 amp green fuse installed directly next to it. The stud closest to the front bumper should have an orange 40 amp fuse installed in the location directly next to it which powers...
view full answer...
- Parts Needed to Install 7-Way on 2018 Ford Transit T250 without Tow PackageThe Curt 7-Way part # C55774 that you referenced is a fit for your 2018 Ford Transit T250 IF it has the factory tow package and the round connector for a 7-way present at the rear of the vehicle. It's possible you don't have the factory tow package and the connector you are looking for just isn't there. I attached a picture of what the connector you'd need looks like. This would require a different route for installing the trailer wiring. Instead you'd need to start with 4-way # HM11140244...
view full answer...
- 7-Way/4-Way for 2019 Honda Ridgeline with 7-WaySince your 2019 Honda Ridgeline has a standard 7-way you could replace it with the Curt # C55774 which has a 7-way and a 4-way.
view full answer... - How To Install Both In-Bed And Bumper 7-Way On A 2004 Ford F-250Yes since your 2004 Ford F-250 came with a factory 7-way trainer connector you can use The Curt 5th Wheel/Gooseneck Custom Harness # C56070 to install an in-bed 7-way. To get the bumper 7-way to you can use The Curt T-Connector Wiring Harness # C55774 which will work well with the harness listed above. I attached a review video link below.
view full answer... - Trailer Wiring Harness That Plugs Into 2023 Chevy ColoradoWhile we do not have any trailer hitches for your 2023 Chevy Colorado, there are trailer wiring harnesses that plug right in. I'm not sure if you were asking for a 4-way flat or you have a 4-way and want to upgrade to a 7-way so I'll cover both bases and give you options for each. Also, the 7-way also has a 4-way connected to it so you can tow a trailer with either a 7-way or 4-way: - 7-Way: Curt T-Connector Vehicle Wiring Harness - 7-Way and 4-Pole Flat Connectors # C55774 - 4-Way: Curt...
view full answer... - Recommended 7-Way Trailer Harness for 2018 Ford F-150 without Connector We have exactly what you need. In order to install a 7-Way connector on your 2018 Ford F-150 you just need the Curt T-Connector Vehicle Wiring Harness # C55774. This will plug into the round US car connector that you mentioned under the truck (see attached image) and provide you with both a 7-Way and 4-Way connector.
view full answer...
- Trailer Hitch, Ball Mount and Wiring For 2019 Nissan Titan With Factory Package To Tow A TrailerI recommend the 2" Class III Curt Trailer Hitch Receiver part # C13304 to tow the small trailer with the 2019 Nissan Titan because it is a bit easier of an install compared to the Draw-Tite. I have attached an installation video for your reference. This particular hitch will provide you with 8,000 lbs of gross towing weight capacity. I still recommend to take a look at your owner's manual so you can be familiar with your specific towing weight guidelines for your vehicle. I recommend the...
view full answer...
- Does Curt 7-Way/4-Way T-Connector Fit 1999 Ford F-150 with Factory 7-WayYes, the Curt T-Connector Vehicle Wiring Harness # C55774 uses the standard US Car Connector (see attached photo) which you should have on your 1999 Ford F-150 (behind your current connector). This connector will just plug into place.
view full answer...
- Recommended Hitch and Ball Mount for a 2017 Audi Q7Thanks for the picture! The Curt Trailer Hitch item # C13277 you referenced is confirmed to fit your 2017 Audi Q7. This hitch is custom fit and bolts to your Audi with included hardware. To be level you will typically want your ball mount to be within 3" of the height of your trailer's coupler. The receiver on your Audi will be right at 12" above the ground so you will want to use the Curt Ball Mount for 2" Hitches item # C45338. This ball mount will give you 7" of rise. You will also...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Dustin K
Video by:
Michael B
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Heather A.
10/26/2018
The 7-way bracket that comes with the wiring harness part # C55774 is designed to be installed with the wiring harness bracket hanging below the no drill bracket part # C57202. Since you are worried about the loose wiring I would recommend using some wire loom such as part # 459075-1 to protect your wiring and zip tie any slack with zip ties part # DW05726-25. I know this is not the option you wanted but I feel it is better than drilling into the hitch.
Helpful Links
Accessories-and-Parts/Curt/C57202.html
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Tools/Deka/DW05726-25.html
Tools/Spectro/459075-1.html