This sturdy cargo net helps control and secure your load. A built-in cinch rope lets you tighten down the net over freight. Includes 10 carabiners for attaching the net. Designed for trailers from 10' to 12' long. Weight capacity is 400 lbs.
Features:
Specs:
This sturdy cargo net helps to secure your load and to keep your freight from shifting or blowing out of your trailer.
The black nylon net includes a cinch rope with a heavy-duty plastic cam that lets you tighten the netting over your load to help keep your cargo in place. This cinch rope runs through the outer edge of the net. After you tighten the rope around your load, turn the lever on the cam until it snaps into one of the integrated slots. This will help ensure that the rope stays cinched.
Secure the net to your trailer with the 10 included carabiners. Attach the carabiners directly to existing anchor points on your trailer. For heavy loads, you can thread cargo straps through the netting and over your gear to provide extra security. You can also install an E-track cargo control system (sold separately) on your trailer and use Snap-Loc tie-down anchors, Loc-Rings, and straps to get more tie-down options.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Snap-Loc heavy duty trailer cargo net in eight foot wide by 12 foot long, part number SLAMCN96144-P. Our cargo net does measure 96 inches wide by 144 inches long and does have a working load capacity of 400 pounds. When not using your cargo net, it does come with a storage nylon bag you can put the cargo net in. Let's go ahead and point out a few features here on our cargo net. Around the outer perimeter, there is a cinch rope that allows you to pull the cargo net tight around your cargo that's on your trailer. When anchoring the cargo net to your trailer, you want to make sure that you only connect the anchor points to this rope and not to the actual cargo net itself. The cargo net does come with a hook and loop strap that is attached to the back side that allows you to coil up any excess cinch rope that you may have and use the hook and loop strap to secure it. This right here is our cam. This is what allows us to tighten down the cinch rope that goes around the outer edge of the cargo net.
Let's go ahead and show you how it works. The cargo net comes with a total of 10 of these carabiner clips. These are used to connect the cinch strap to your anchor points on your trailer. We'll go ahead and put one of our carabiner clips on our cinch strap and show you how it works. Now that we've gone over some of the features of our cargo net, let's go ahead and show you how to install it. Now that we have our cargo net secure with our carabiner clips, with our plastic cam here unlocked, go ahead and pull on both of the ropes, tightening up the cinch rope that goes around the outer edge of the cargo net. That will conclude our quick look at the snap lock heavy duty trailer cargo net, part number SLAMCN96144-P.
.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.