To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Give your Ford F-250 Super Duty's cloth seats an upgrade with these seat covers that look and feel like factory leather. The perforated leather covers with memory foam centers keep you cool and comfortable as you drive. Simple, slip-on installation.
Features:
Upgrade your vehicle's cloth seats with these luxurious leather seat covers that look and feel just like factory original equipment. The custom-fit covers protect your seats from wear and tear, and they install easily over your existing seat material.
Each set includes covers for your vehicle's front and rear seats, as well as covers for your headrests, armrests, and center consoles (where applicable). The covers accommodate all of your vehicle's seat belts and controls without impeding access, so you won't lose functionality. Every seat adjuster, every console function, and every cup holder has been accounted for.
The covers are constructed of perforated leather. This ventilated, breathable material doesn't conduct body heat so you'll stay cool on long road trips. The perforations prevent moisture build-up between the covers and seats so mold and mildew won't develop. Each cover has anti-bacterial and anti-odor coatings to help preserve their new and clean scent, and they are flame resistant.
The breathable leather also makes this the ideal seat cover to use with a Clazzio seat heater (SH-1 - sold separately).
All Clazzio covers are custom cut and hand sewn by professional machinists to ensure that they fit your vehicle's seats without flaw. The thread used for stitching the seams won't loosen, fray, or tear over time. It is, however, specially designed to break away in the event that the seat airbags deploy. And you can replace an individual cover so one set of Clazzio seat covers will last for the lifetime of your vehicle.
Each cover has a 1/2" memory foam pad in the center. This memory foam layer softens in reaction to your body heat to perfectly fit the contour of your hips and legs. This gives you an additional level of comfort that you didn't have with your original seats.
Both the driver's- and passenger's-side front seat covers have a rear map pocket for convenient storage.
Clazzio covers install over your seats with no need to remove any factory material. Simply slip the covers over the seats. Once the cover seams are properly aligned, tuck all excess material into your seats' plastic trim so they look tight and wrinkle-free. Then secure the covers with the built-in straps, hook-and-loop fasteners, and S-hooks. Detailed instructions with color pictures are included with each seat cover to ensure easy installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Shane: Hey guys. Shane here with etrailer.com and today we're going to be taking a look at Clazzio's custom leather seat covers. When we think of leather, we think of class, we think a luxury, but let's face it, getting a vehicle with leather in it from a dealership, dealerships charge quite a bit for it. If you go to get them custom made at a shop, you're going to pay several thousand dollars to get them done and we can't all afford that. Well, Clazzio's has a solution. They have custom leather seat covers.
They're going to fit directly over your factory seats. Once they're installed, they're going to give your vehicle that upgraded look of the leather interior.When I first pulled these out of the box, I was thinking to myself, I was pretty skeptical, leather seat covers. They're going to go on like any other seat cover and they're going to be loose. I was very surprised when I installed them that how tight they fit. These are going to be real leather and they're going to fit so tight they're like factory seats that we're in the vehicle when you bought it.
I do want to stress before you order your seat covers, make sure you check the fit guide for your seat configuration because these are going to be custom fit. Like our F350 here, we fold down our center armrests. We're not only going to have it for the seat for the backrest, but we're also going to have it for the armrest. These are not only available for your front seats but also your second and third row seats. They're also going to come in not only black but gray and beige.
As I mentioned before, maybe you have some old receipts that are just wore out, maybe they're tore.Maybe you're just looking for an upgrade or you have cloth seats that have a lot of stains on them like our vehicle did here today. Once we put these on, I had a lot of people stop by and we're very surprised at how much of an upgrade it gave the interior of this vehicle. Couple of the things I would really want to point out that is really nice in my opinion with a custom fit, our tie downs for child safety seats, they're actually sewn openings around those so they fit very nicely. Really it's that custom look. As you can see here, with our headrest covers, they're going to be precut so they fit around all of our buttons including our hold downs, for our headrest.
Our driver and passenger seat are going to have map pockets on the back. What I like about them is the pocket is not flapped open like this.There's actually a plastic band that goes inside of here and you can see how it's kind of curved. That helps keep the center of it pushed up against the seat so it's not hanging open. Each seat is going to have a half inch thick memory foam pad underneath. This is going to make it much more comfortable when driving. You can see it's going to be perforated and perforation is not only going to allow the seat to stay cooler during the summer months, but it's also going to keep moisture from building up between the seat cover and the factory seat. This is greatly going to reduce any mold or mildew from building up in between. Our stitching. We come over here, take a look at our stitching. Our stitching is going to be double stitched hand-sewn so it's going to hold up to that normal wear and tear of getting in and out of your vehicle.Our kit is also going to come with matching head rest covers. They're also going to be leather. They're also going to be double stitched hand-sewn seams. As far as cleaning these, very simple. Unlike cloth seats which you have to scrub them to get the stain out and sometimes the stain doesn't always come out and then you had to let them dry, with these, soap and water, wipe them off, dry them and they're ready to go. Once you get these installed, it's pretty much going to be a one time deal, which brings me to the installation part of it and insulation can be a little bit time consuming and can be a little bit difficult at times, but once I got them installed, it was well worth the trouble that I went through putting them in.Now you've just ordered your new seat covers, but maybe you've never had seat warmers or seat heaters. Well, Clazzio's offers seat heaters that go directly under the new seat covers and sit right on top of your factory seats. This is going to give you a much more comfortable ride. It's going to make your seats much more warmer in those winter cold months. You can find those here at etrailer.com. Overall, I think these covers turned out looking great, whether you're buying a used truck or maybe you have a truck with the seats are just a little bit worn out and you're looking for new covers. Other than that, I think I'm going to get some from my own vehicle. That being said, that's going to do it for a look at Clazzio's custom leather seat covers.
Average Customer Rating: 4.5 out of 5 stars (2 Customer Reviews)
Give your vehicle's cloth seats an upgrade with these seat covers that look and feel like factory leather. The perforated leather covers with memory foam centers keep you cool and comfortable as you drive. Simple, slip-on installation.I am pleased with the product overall. The seat covers really do look very close to factory leather seats. They took me about 4.5 hours to install all the covers on my f250 supercab. It’s an xlt with cloth seats and these leather covers look great. The instructions that come with the seat covers are not very good. I would recommend an installation video. Also the two back seat bottom covers must have shrunk a bit because I could not get the Velcro to meet. I bought some 2” wide Velcro and connected the ends. I am waiting for a response from etrailer. The only piece that doesn’t really look that good is the cover that goes around the front center console section. The cover that fits the lid looks great but the cover that fits the front part does not fit very well. With the center console in the up position, that part can not be seen. They are comfortable and look great overall.
Now a year since install..all fitting(s) pieces remain snug and secure. Very comfortable, and easy to clean. As of this review, NO suggestion of wear, tear, or loose corners. All in all, VERY pleased.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.