Griot's Garage G9 Random Orbital Polisher - 6" Backing Plate - 10' Long Cord

Griots Garage Car Polisher - GG34FR

Use this 9-mm-throw, dual-action orbital to easily polish or buff your vehicle. Polishing pad (sold separately) spins on the axle as the backing plate moves in an elliptical orbit for even application. Switch between 6 speeds.

Features:

• Orbital lets you polish and buff your vehicle faster and easier than by hand
  • Correct large scratches with a defect-correcting cream
  • Perfect your look by removing small scratches with a light polish
  • Protect your vehicle from dirt and debris with a wax or sealant shield
• Dual-action rotation thoroughly applies solution to your vehicle's surface
  • Buffing pad (sold separately) attaches to backing plate, which spins independently on spindle
  • Elliptical orbit of backing plate spreads solution over a wide surface area
• Random orbital head is safer and easier to use than a rotary or high-speed buffer
  • Generates less friction on application area
  • Will not damage your paint job
• 6-Speed power dial lets you customize buffing speed for stronger or gentler application
  • Treat deep defects or minor surface streaks, depending on your chosen speed
• Ergonomic design is comfortable to use
  • Double-shot rubber platypus head-grip, and strategically placed all over tool
  • Shroud grip contoured to accommodate four fingers
• Orbital can be used on flat or gently curved surfaces
• Fan-cooled counter-balance
• Includes 14-mm backing plate wrench and replacement high-carbon brushes
• Convertible to a 5" pad system with optional 5" Vented Orbital Backing Plate

Specs:

• Backing plate diameter: 6"
• Power cord length: 10'
  • Wire gauge: 18 AWG
• Weight: 7 lbs
• Maximum orbital speed: 6,400 orbits per minute
• Spindle orbit radius: 9 mm (11/32")
• Power output:
  • Wattage: 1,000 watts
  • Amperage: 8.5 amps
• Limited lifetime guarantee
• 2-Year comprehensive warranty

This random orbital lets you apply polishing solution or wax to your vehicle quickly and easily without damaging your paint job. It's safer and easier to use than a high-speed polisher, and it's more effective than a non-random orbital. With 6 speed settings and an ergonomic handheld design, this orbital works for many different applications. Whether you're a car care expert or a newcomer, this orbital will help you get the job done.

Dual-Action Rotation

The Griot's Garage random orbital features dual-action rotation. While the buffing pad (sold separately) continuously spins on the spindle, the backing plate that the pad is attached to rotates in an elliptical pattern. These combined motions spread the solution in a smooth, even pattern across your vehicle's surface. The smooth distribution also keeps the solution from leaving ugly streaks after drying.

Unlike a rotary buffer, a dual-action orbital won't spin the pad in the exact same spot repeatedly. This minimizes friction, which in turn limits any heat buildup that could cause blistering to your paint. The dual-action rotation not only keeps your paint job intact, but it also prevents you from burning yourself on a hot vehicle surface.

6 Speed Settings

The Griot's Garage random orbital has 6 settings so that you can increase or decrease the speed at which the pad and backing plate move. Setting 1 will give you the slowest speed, while Setting 6 will give you the fastest.

When waxing your vehicle, it's recommended that you use a lower setting, like 2 or 3. A slower speed will apply product more gently, giving you more control over the application. Keep in mind that, if the orbital speed is too slow, it can keep the product from spreading properly, which can leave messy streaks on your ride.

To correct defects with a correcting compound, or to buff out minor scuffs or swirls with a polish, a speed of 4 or 5 is usually recommended. When using a faster speed, be sure to hold the orbital extra-steady to ensure that the solution is spread evenly without splattering.

Simple Operation

To use this orbital polisher, begin by attaching a buffing or polishing pad (sold separately) to the orbital's head. Be sure that the pad is securely attached and properly centered on the backing plate. Apply your compound in a spiral onto the pad. This spiral pattern will assist in evenly distributing the solution as you slowly move the orbital across your vehicle's surface.

When you're ready to get started, set the orbital head on your vehicle's surface and turn on the power. You want to be sure to set the orbital down before powering it on to avoid splattering the compound. Start spreading on the lowest speed, then gradually increase the speed to the recommended setting for your application. Keep the pad flat on the vehicle and apply even pressure for the best possible spread. It's recommended that you do 2 full passes with the orbital, but you can perform additional passes, if needed.

When you're done, check for any extra residue and use a clean towel to wipe it off.

Whether you're a longtime car care expert or just starting out, using the Griot's Garage random orbital is that simple.

10901 Griot's Garage G9 Random Orbital Polisher - 6" Backing Plate - 10' Long Cord

Installation Details