To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
Features:
Heavy-duty strength in a lightweight package: the TorkLift Talon tie-downs are the premium choice for heavy truck campers and unforgiving climates. Made of military-grade aluminum alloy, the removable arms are rustproof and robust while also being lightweight and easy to handle. The receiver brackets are constructed of rugged stainless steel, and both components are protected by a high-impact powder coat finish that guards against wear and tear.
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity is going to sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush to the underside of the vehicle. Remove the arms from the brackets when you're not using them and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1644 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.No worries about securing the camper to the truck using the Torklift tie-downs. Third camper/truck I have used these on and would not consider any other option.
Worked as advertised. Fit the truck with no alterations and installation was relatively smooth
My package arrived quickly, there was minimal damage to the box, the steel and aluminum pieces were wrapped in paper, and survived the shipping to Alaska!
The rear mounts were easy to mount. The only problem the package was missing 4 flat washers. I also just received the Front mounts. They were a little harder to mount by myself. Some advice is to watch the install on [video]. I ended up using a floor Jack to hold the mounts.
This is my second set of Torklift tie downs. Like the first, these are excellent. My only reason for not giving 5 stars is the annoying quality control in the packaging. My front tie downs came with only 1 bolt fisher, not the required 3! I was able to complete the install using the bolt fisher from the set of rear tie downs. I was able to install the C bolt without the fisher. One of the lock washers was the wrong size...not a big problem for a shop install but I had to make a trip to the local hardware store before I could finish the project. Lastly I had to cut off the passenger side bed bolt in order to get a socket on the B bolt to torque it down....again, not a problem for a shop install but irritating for this 70+ guy on his back in the driveway! *Aside from all this..I love the product!
Was very easy to install. Great Video to assist with the installment.
Even though I preferred the wrong ones etrailer is always good with returns
These are an easy install, Torklift has a super video .. watch that first and your an expert!
Very easy to install and a great addition to my Ford F-350. Holds my Arctic Fox camper very secure and safe.
The product fit my 2022 F250 perfectly. I had them installed I an hour and a half. The only thing you might add is that a small impact driver helps to get the nuts to grab and tighten down. Very satisfied.
Great Product easy install no holes to drill
Bolt holes lined up perfectly during installation and the product was well engineered.
John
4/14/2022
Excellent!
Just what I ordered.
They work great. Very easy installatio n.
Easy install fit perfect on my 2019 f450. Fast delivery
Do you have a question about this Camper Tie-Down?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert M.
3/31/2020
Great product...highly recommend!