This cup holder lets you carry 2 drinks on your boat. You can mount it on your boat console, bait tank, or nearly any other vertical, non-porous surface. Remove cups for cleaning or to hold large drinks. Vacuum cup mounts and detaches in seconds.
Features:
Specs:
Mount this cup holder on your boat console, bait tank, or any other vertical, non-porous surface to keep your beverages close at hand. It holds 2 cups or cans up to 3-1/2" in diameter.
You can easily remove both cup holders to hold drinks larger than 3-1/2" diameter, or for simple cleaning. You can also use an open slot for a SeaSucker Small Dry Box (302-9308 - sold separately) if you have valuables you want to keep dry and secure.
This cup holder is quick and easy to mount. To install the holder make sure the mounting surface is clean and place the vacuum cup on a vertical, non-porous surface on your boat then press the pump several times until the orange band disappears. To break the seal and remove the holder from your boat simply pull the T-shaped tab up and towards the center of the cup. As suction decreases over time the plunger will extend from the cup. When the orange indicator band shows simply re-pump the plunger.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, this is Steven with etrailer.com. I wanna welcome you back. Today we're gonna be taking a look at the SeaSucker Marine Boat Accessory 2 Cup Cup Holder. Now, like I said, this is a 2 cup cup holder. It's gonna be very durable plastic. It's made here in the Good USA.
As you can see, the cup inserts come out, easy to clean, easy to change. If you ever lose one, they are tapered so you can fit any size can or cup that you may have. Like I said, they just pop right in, pop right out, pretty simple to use. It does come with this 4-1/2" vacuum seal, and on top of this seal, you're gonna have this vacuum pump with an orange indicator to let you know whenever it's fully seated and safe to use. Now, as far as some measurements on this, overall from edge to edge, we get about 11-3/4" in its widest part, the cup inserts, they're about 3-1/2" wide.
And if we're measuring it as far as depth, we get about roughly 5-1/2" to the edge, give or take. Now, as far as using this, it does come with a heavy duty plastic cover for the seal. So again, when you're not using the vacuum seal, you want to keep this heavy duty plastic cover on it, that's gonna keep it protected, clean, and it's gonna be a lot easier to use for you that way. It does need to mount on a clean, smooth surface. So what I'm gonna do is show you how to use this here real quick.
You'll put it on the wall or whatever you're mounting it to. You just simply give it a little push and you start pumping out the air with this actuator. Keep pumping until all the orange has gone from your view like so. Now, once it's got pumped all the way up and there's no orange, it's on there and it's ready to use. This is rated at 120 pounds of pull, so you're not gonna easily get this off and it's not gonna fall off on you by itself unless you've had it on there for a long, long time.
If you ever do see any orange showing again here, let's say you're using it out there on the lake or whatnot, and you see some orange, just give it a couple pumps, pump it back up, it'll seal itself back up. Now to get it off, there are a couple of rubber tabs on either side. You just simply pull up on those and that's gonna release the air and let you get it off. Like I said, these do hold 120 pounds worth of pull, so when you first put it on, it's not gonna come off too easy. There we go. All right, like I said, that's gonna take a look at our SeaSucker Marine Boat Accessory Cup Holder with Two Cups. I wanna thank you again for joining me. Again, this is Steven, etrailer.com. I look forward to seeing you next time.
Average Customer Rating: 4.4 out of 5 stars (5 Customer Reviews)
This cup holder lets you carry 2 drinks on your boat. You can mount it on your boat console, bait tank, or nearly any other vertical, non-porous surface. Remove cups for cleaning or to hold large drinks. Vacuum cup mounts and detaches in seconds.
These cup holders are great. I have it mounted on the side of the console and they stay put even in the heaviest pounding.
Nice product. Works well.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.