Replacement Installation Hardware for Westin PRO TRAXX 4" Oval Nerf Bars

Video Transcript for Review of Westin - Nerf Bars - Running Boards - 21-2325PK

Today we're gonna take a quick look at the replacement insulation hardware for Westin Pro Traxx four inch oval Nerf Bars. This is gonna be a complete new hardware kit for your Nerf Bars. If something got damaged along the way, or there was a minor accident where somebody dinged up your hardware and you just need a new replacement, this is gonna have everything you need besides the bars themselves.So I have six new covers to go over our hardware, in between our truck frame and the outside of our bars. So these just act as little covers there to make everything look pretty. We also have our new brackets. We get two of each types, so there's gonna two for the front, two for the center, and two for the rear.

Those are each marked, there's a stamp on each one of those indicating the location. So this one is for rear, it has the R stamped into the metal. It's easy to determine which bracket goes where. Again, we're gonna have two that have F, C, and R for front, center, rear.We have a complete new kit of hardware including all of the nuts, bolts, washers, lock washers, that we need to get our bars installed, including a new Allen key or Allen tool to get everything tighten down, and a new set of instructions so that we know exactly how to do what and when.This is going to be for our Westin Pro Traxx Nerf Bars that are going to be part numbers 21-23250 or 21-23255. Those are both going to fit the 2007 through 2019 Toyota Tundra CrewMax.

So this is gonna be the complete hardware kit for that vehicle. Both those part numbers I listed, those are gonna be for the silver and black bars.That's gonna do it for our quick look at your placement installation hardware for Westin Pro Traxx four inch Oval Nerf Bars.