Dutton-Lainson In-Cab Remote Switch Kit for DC StrongArm SA Series Electric Winches

Video Transcript for Review of Dutton-Lainson Trailer Winch - DL24066

Today we're going to take a look at the Dutton-Lainson In-Cab Remote Switch Kit for the DC Strong Arm SA Series Electric Winches. This kit will allow you to control the load and unload functions of your 12-volt DC electric winch from the convenience of your cab with this remote switch kit. The kit will include everything we laid out here on the table. We'll start with the switch, which is the heavy duty 3 position rotary switch. It comes with the 80-amp circuit breaker assembly. The wiring it comes with is a 15 foot long 8 gauge positive wire, 5 foot long 8 gauge negative ground wire.

Right here there's two 10 foot long 8 gauge winch to winch wires, which the attached plug. It comes with 6 terminals for your connections, 2 heat shearing tubing, a switch label to label your position of the switch, and a nice set of installation instructions that'll describe how to install everything.Now this is rotating, self-centering load, unload switch. You can see it will automatically return to the off position when it's released. Turns forward to let out the cable, and backward to retrieve the cable, and they do include this nice switch label that you can attach to it to let you know the switch positions. The plug right here is designed to plug directly into the winch switch pocket without rewiring, and again, the application for this kit is the 12-volt DC Strong Arm SA Series Electric Winches.That should do it for the review on the Dutton-Lainson In-Cab Remote Switch Kit for the DC Strong Arm SA Series Electric Winches..