Camera washing system uses a dual-spray nozzle that mounts to your camera's lens to clear dirt and grime so you can see while backing up. The nozzle delivers a high-pressure stream at the push of a button from inside your cab.
Features:
Specs:
This camera washing system is the perfect device to complete your backup camera setup. It gives you the convenience to clear dirt, grime, and other road debris off your backup camera's lens without getting out of your vehicle. You can rinse mud off your lens at the push of a button while driving, allowing you to maintain a clear view when maneuvering your RV through a campground or backing up into a tight parking spot.
The touch pad controller triggers the dual-spray nozzle that is mounted to your camera's bracket. The pump ensures that the nozzle is able to deliver a high-pressure stream, strong enough to clean off grime without having to manually wipe it down. It's recommended to use a solution made of glass cleaner mixed with water.
The 12V - 24V power supply box can mount inside or outside of your vehicle and wires directly into your system to power your touch pad controller and the pump for the 1.5-quart water tank mounted on your vehicle's chassis. Its durable, plastic construction won't crack in extreme heat or cold and can withstand temperatures of -22 F to 212 F (-30 C to 100 C), while the 9.5' water tube can hold up in temperatures of -22 F to 176 F (-30 C to 80 C).
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna take a look at the Universal Camera Washing system. Now this Universal Camera Washing system will use high pressure water to clear dirt and road grime off your rear view cameras with the push of a button. It is designed for rear view cameras that are mounted on vehicles, such as refuse trucks, trucks in winter climates and trucks that are used on non-paved roads. It's perfect for cleaning road salt, mud, dirt, grime, and other debris from the camera lens. Helps prevent damage to your camera. It does use this pressure sensitive touch pad controller for easy operation.
It is compatible with rear view cameras, basically the nozzle, right here, will mount to your camera bracket. Washer bottle mounts to your chasse and then the system will wire directly into your truck's power.The system does include everything laid out here on the table. The one and a half quart tank with the pump attached to it; the fluid tube with the pressure nozzle; power cord; the touch pad in-cab controller with the length of cable; and all the mounting brackets and hardware you need to install it. Now the washer pressure is 12.7 PSI, the length of the water tube is 9.5 feet, tank capacity on this is 1.5 quarts. Now the touch pad cable length, in other words there's your touch button right there, and the length of this cable is 65 feet, and the system is compatible with 12 volt or 24 volt systems.But that should do it for the review on the Universal Camera Washing system..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.