Trailer Wiring Harness Installation - 2007 Honda CR-V 118427 Video

The Curt Trailer Hitch Receiver #C12002 for your 2007 Suzuki Grand Vitara uses weld nuts on the inside of the frame rails to attach the bolts and mount this hitch. If there are currently bolts in that location, you will need to remove them and there…

A weight distribution system is a device that is installed on a trailer and uses leverage to transfer the weight of the load across the entire towing setup. It's in addition to a trailer hitch and is optional for towing, although sometimes highly…

I looked up the towing capacity for your 2007 Honda CR-V and it looks to be 1,500 lbs as the max capacity for the vehicle. I'm not sure if your trailer would weigh less than that but we do have everything you'd need to tow a trailer with your…

On your 2006 Jeep Liberty the Tow Ready T-One Wiring Harness, #118524, is the correct wiring harness. Using the Tow Ready Adapter 4 Pole to 5 Pole Trailer Wiring Adapter, #20036, will work on your vehicle to give you the adapter to plug into your…

I'd be happy to help you with that. If you're the type of person that doesn't care for the appearance of a trailer hitch, a mostly-concealed hitch like the EcoHitch #306-X7291 is what I'd recommend. The only visible portion of the…

There are at least 3 locking tabs on the connector on the trailer wiring harness #118427. I have included a picture that shows them. You may need a small flat head screwdriver to pry and release the tabs so you can unplug the old connector.

A Class II hitch would use a 1-1/4 inch receiver, for a 2 inch receiver tube you'd want a Class III hitch. We offer two US Made Class III hitches that I'd recommend, the #13555 from Curt or the #306-X7291 from EcoHitch. Both hitches share the…