Front Mount Trailer Hitch Installation - 2012 Ford F-250 Video

To install the Draw-Tite #65049 on your 2012 F350, the front air dam under the bumper does indeed need to be removed temporarily. Once the hitch is in place, a hole is cut in the air dam that allows the receiver opening to pass through, then the…

I did some research and found instructions for installing the RanchHand Legend Grille Guard on your 2011 F-250 4x4. You can check out the attached photo that shows where a front hitch is mounted on a Ford F-250. You may find that the bottom bar on…

Thank you for the details! We have hitches that can be installed on 5th wheels like what you have and all you need to do is measure the distance between your frame to choose the correct fit. For a standard option you can go with the Curt Adjustable…

For your 5th Wheel Cedar Creek Trailer, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide #13703. This hitch can be welded or bolted onto your trailer frame and will work on box frame, c-channel, or…

For your 2015 Ford F-350 the correct front hitch is the part #65049 which is a confirmed fit. The part #65076 is for newer versions of your truck so it would not be fit. I attached an install video and an install pic as well.

The front hitch part #65049 that you referenced is a confirmed fit for your 2016 Ford F-250 and only requires minor front fascia trimming on four wheel drive models of the vehicle. The trimming allows the front hitch to pass through the lower air…

For your 2008 Ford F-350 we have the Draw Tite hitch part #65049 which is a confirmed fit and has a tongue weight capacity of 500 lbs. The motorcycle carrier we offer that would work best is the Ultra Fab part #UF48-979033. Reason being it weighs…

The highest capacity front hitch we offer for your 2015 Ford F-350 is the part #65049 that has a vertical pull rating of 500 lbs. The best solution I could provide for you would be the motorcycle carrier part #UF48-979033 that has a 600 lb capacity…

The Draw-Tite Front Mount Trailer Hitch Receiver, #65049, will fit the 2011 Ford F-250 Super Duty Lariat. I have included links to the installation details and a video showing a typical installation for reference. A cooler would have to be pretty…

Your VIN isn't required to give you a front mounted hitch fit. The Draw-Tite Front Mount Trailer Hitch Receiver #65049 is a confirmed fit for your vehicle and is an easy install. It is rated for 500 lbs vertical load and 9000 lbs line pull. It…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

I absolutely have some suggestions on what you will need for a front-mounted hitch and bike rack for your 2011 Ford F-250, and let's start with the hitch. The best option by far is going to be from Draw-Tite because it has the best bumper…