EcoHitch Hidden Front Mount Trailer Hitch Installation - 2011 Ford F-350 Super Duty Video

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need to worry…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

For your 2003 Ford F-350 Cab and Chassis (or Crew Cab) the Draw Tite hitch part #65022 is a confirmed fit. It installs in the middle of the bumper. If you check out the picture I attached you will see exactly where it installs.

Although it mounts to the sides of the front frame members instead of the tow hooks, the EcoHitch #EH59FR front mounted receiver would install so that the receiver tube sits behind the license plate holder. The Curt #C31018 and Draw-Tite #65049 would…

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

While we have an option for you, from the photos I've seen, the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH59FR looks to extend ever so slightly past the tow hooks. So what I recommend instead for your F-250 is a front hitch from…

Yes, the Progressive Dynamics 9100 Inteli-Power Lithium Converter #PD9145ALV would be the correct replacement since you've switched over to lithium batteries. It has the same 45 amp rating so you'll be able to reuse the wiring you already…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

Amps times volts equals wattage so with the RV Holding Tank Heater #372HTH-A pulling 1 amp at 120v you'd get 120 watts.

In order to choose the correct Progressive Dynamics Inteli-Power RV Converter and Battery Charger like part #PD9145ALV you will indeed need to know the total amp hour battery capacity. That said, there is not an exact formula to determine the correct…

To install the Draw Tite hitch part #65022 on your 1999 Ford F-350 you will need a 3/4 inch wrench, a 15 mm wrench, an 18 mm wrench, and a 5/8 inch drill bit. Check out the install video I attached for more info on the install as well.