B and W Custom Installation Kit with Base Rails Installation - 2020 Chevrolet Silverado 3500 Video

If neither truck has the puck system that would mean the Demco Hijacker is one designed for above bed rails which means you'd only need a set of above bed rails installed in your 2020 Chevy Silverado 2500 like the #DM39FR and you'd be set.

The bracket kits like the B and W part #BWRVR2402 that you referenced only can be used with the same manufacturer rails like in this case the #BWRVR3210.

The B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches #BWRVK2505 are rated for 18,000lbs.

I have attached the complete installation instructions for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 for you to check out. The instructions include detailed steps for the installation and assembly process for the hitch upon…

The B&W Patriot 5th Wheel Trailer Hitch part #BWRVK3270 will only work on a 2020 GMC Sierra 2500 without the factory prep package using the B&W Custom Installation Kit part #BWRVK2505. The reason it won't work on models with the factory…

I do have an option for you but the Furrion MPPT Solar Charge Controller part #FSCC60PWBBL does not contain any sort of battery monitor display. That said, we do have a very similar charge controller which does, the Go Power MPPT Solar Charge…

The only drilling you will need to perform on your 2023 Ford F-150 to install the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BW77FR is the 4" hole for the ball and the four 1/2" holes for the safety chain hooks. You will not…

It is perfectly acceptable to use the B&W Turnover ball Gooseneck hitch #BW77FR, and the #BWGNXA4085 offset ball be used with an Andersen Ultimate 5th wheel Connection. The Andersen hitch adapter provides about 8 inches of offset, plus the 4…

For your 2019 Ford F-150 with the 5-1/2 foot bed the B&W Turnoverball Gooseneck Hitch #BW77FR you were looking at will work perfectly and would be my recommendation. The assembly includes custom mounting brackets that use existing holes in the…

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

That is an excellent question and I agree that sometimes terms like this can be a bit confusing. Even though the king pin does connect to the jaws of the 5th wheel hitch, when you take your measurements it is much easier to go from the ground to the…